- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
- Product private attributes
 |
DH1029
Degol
| Quantity: | |
|---|---|
1800*50*1.0 Stainless steel piano hinges door hinges made in China——DH1029
Piano hinge: seamless glide, sturdy steel, easy install—perfect for wide lids/doors
We accept customized product sizes
This piano hinge is the unsung hero for wide, heavy panels—from furniture lids to equipment doors. Crafted from sturdy, rust-resistant steel, it delivers seamless, quiet gliding motion, no matter how many times you open or close the surface. Its full-length design distributes weight evenly, eliminating wobble and wear that shortens lesser hinges’ lifespans.Pre-drilled holes simplify quick, secure installation, fitting standard frames without extra tools. Sleek and low-profile, it blends unobtrusively with any design—modern, industrial, or classic. Built to last, it needs minimal upkeep, staying reliable for years. More than hardware: it’s the steady, smooth solution for large, high-use panels.
Brand | Degol |
Product name | 1800*50*1.0 Stainless steel piano hinges door hinges made in China |
Finish | SSS, PSS, AB, AC, PVD or Customized |
Product Model | DH1029 |
Size | 1800*50*1.0mm/Customizable |
Accessory | Keys,Screws,Latch,Strick plate |
Type | Door handle lockset lever lock |
Material | Stainless steel 201, 304 or 316 |
Suit for | Door,storeroom,classroom,hotel |
OEM | Welcome |
Sample | Free |
MOQ | 200 pieces |
Delivery time | Usually 25~35 days |
1. Preparation and Sizing
Measure and Cut: Piano hinges are designed to be cut to size. Measure the length of the opening and use a hacksaw to cut the hinge. File down any sharp edges at the cut end.
Mark the Center: To ensure the hinge is centered, mark the midpoint of both the hinge and the edge where it will be mounted.
2. Positioning the Hinge
The "Knuckle" Placement: For a standard installation, the round part of the hinge (the knuckle) should sit just outside the edge of the door/lid so it can swing freely.
Clamp it down: Use spring clamps or painter's tape to hold the hinge perfectly flush against the surface. Even a slight misalignment will cause the door to bind later.
3. Drilling Pilot Holes
Start with the Ends: Don't drill all the holes at once. Start by drilling pilot holes for the two outermost screws.
Use a Vix Bit: If you have one, use a self-centering drill bit (Vix bit). It ensures the hole is perfectly centered in the hinge's countersunk hole, preventing the screw from pulling the hinge out of alignment.
4. Mounting
Drive Initial Screws: Drive the screws into the two end holes.
Check for Alignment: Close the door or lid to ensure it sits square and opens smoothly.
Finish Drilling: Once you’re happy with the fit, drill the remaining pilot holes and drive the rest of the screws.
1. Common Practical Uses
Lids for Storage: Best for toy boxes, cedar chests, or toolboxes where the lid is heavy. It prevents the wood from warping over time.
Folding Furniture: Ideal for drop-leaf tables, fold-down desks, or "murphy" style bars because it creates a smooth, nearly seamless joint.
Cabinet Doors: Used for tall "pantry" style doors or heavy shop cabinets to prevent the door from sagging.
External Access: Common on boat hatches, shed doors, and piano lids (its namesake).
2. Operating the Hinge
Full Range of Motion: Most piano hinges allow for a full 270° to 300° swing, meaning the door can often fold all the way back against the side of the cabinet if unobstructed.
Cutting to Fit: If the hinge is too long, you can use a hacksaw or a dremel with a metal cutting wheel to trim it. Always file the cut end to remove sharp burrs.
No-Gap Seal: Because it is continuous, it blocks sightlines into the cabinet and prevents dust from entering through the hinge gap.
The product features a high-quality brushed stainless steel finish. This clean, modern look is designed to match other professional-grade 304 stainless steel handles and locks.
Yes, it is manufactured from 304 stainless steel, which offers excellent resistance to corrosion and oxidation. This makes it suitable for use in humid environments like bathrooms or kitchens.
It is designed for silent operation. The internal ball-bearing mechanism ensures that the door rotates smoothly without the squeaking or grinding sounds common with traditional hinges.
1.Superior Surface Quality: Degol hinges are manufactured with "full material" and are specifically designed to have no sand holes on the surface. This leads to a more polished appearance and greater structural integrity.
2.Resistant to Harsh Environments: They are built to resist rust, abrasion, and corrosion, allowing them to perform reliably in humid environments such as bathrooms.
3.Silent and Smooth Operation: The engineering ensures a smooth opening and closing mechanism that operates without noise.
4.Material Variety: They offer hinges in several robust materials, including 304 and 201 stainless steel, iron, and brass, allowing you to choose the level of strength and corrosion resistance needed for your project.
5.Aesthetic Options: Degol provides a wide range of finishes to match different decors, such as:
Satin Stainless Steel (SSS)
Polished Stainless Steel (PSS)
Antique Brass (AB) and Antique Copper (AC)
Custom Support & Sale:+86-750-3915520
Phone:+86 13725946499
E-mail:info@degolhardware.com
Address: Building 2, No. 898 Jiangmen Avenue Middle, Pengjiang District, Jiangmen CityGuangdong, China 529000
1800*50*1.0 Stainless steel piano hinges door hinges made in China——DH1029
Piano hinge: seamless glide, sturdy steel, easy install—perfect for wide lids/doors
We accept customized product sizes
This piano hinge is the unsung hero for wide, heavy panels—from furniture lids to equipment doors. Crafted from sturdy, rust-resistant steel, it delivers seamless, quiet gliding motion, no matter how many times you open or close the surface. Its full-length design distributes weight evenly, eliminating wobble and wear that shortens lesser hinges’ lifespans.Pre-drilled holes simplify quick, secure installation, fitting standard frames without extra tools. Sleek and low-profile, it blends unobtrusively with any design—modern, industrial, or classic. Built to last, it needs minimal upkeep, staying reliable for years. More than hardware: it’s the steady, smooth solution for large, high-use panels.
Brand | Degol |
Product name | 1800*50*1.0 Stainless steel piano hinges door hinges made in China |
Finish | SSS, PSS, AB, AC, PVD or Customized |
Product Model | DH1029 |
Size | 1800*50*1.0mm/Customizable |
Accessory | Keys,Screws,Latch,Strick plate |
Type | Door handle lockset lever lock |
Material | Stainless steel 201, 304 or 316 |
Suit for | Door,storeroom,classroom,hotel |
OEM | Welcome |
Sample | Free |
MOQ | 200 pieces |
Delivery time | Usually 25~35 days |
1. Preparation and Sizing
Measure and Cut: Piano hinges are designed to be cut to size. Measure the length of the opening and use a hacksaw to cut the hinge. File down any sharp edges at the cut end.
Mark the Center: To ensure the hinge is centered, mark the midpoint of both the hinge and the edge where it will be mounted.
2. Positioning the Hinge
The "Knuckle" Placement: For a standard installation, the round part of the hinge (the knuckle) should sit just outside the edge of the door/lid so it can swing freely.
Clamp it down: Use spring clamps or painter's tape to hold the hinge perfectly flush against the surface. Even a slight misalignment will cause the door to bind later.
3. Drilling Pilot Holes
Start with the Ends: Don't drill all the holes at once. Start by drilling pilot holes for the two outermost screws.
Use a Vix Bit: If you have one, use a self-centering drill bit (Vix bit). It ensures the hole is perfectly centered in the hinge's countersunk hole, preventing the screw from pulling the hinge out of alignment.
4. Mounting
Drive Initial Screws: Drive the screws into the two end holes.
Check for Alignment: Close the door or lid to ensure it sits square and opens smoothly.
Finish Drilling: Once you’re happy with the fit, drill the remaining pilot holes and drive the rest of the screws.
1. Common Practical Uses
Lids for Storage: Best for toy boxes, cedar chests, or toolboxes where the lid is heavy. It prevents the wood from warping over time.
Folding Furniture: Ideal for drop-leaf tables, fold-down desks, or "murphy" style bars because it creates a smooth, nearly seamless joint.
Cabinet Doors: Used for tall "pantry" style doors or heavy shop cabinets to prevent the door from sagging.
External Access: Common on boat hatches, shed doors, and piano lids (its namesake).
2. Operating the Hinge
Full Range of Motion: Most piano hinges allow for a full 270° to 300° swing, meaning the door can often fold all the way back against the side of the cabinet if unobstructed.
Cutting to Fit: If the hinge is too long, you can use a hacksaw or a dremel with a metal cutting wheel to trim it. Always file the cut end to remove sharp burrs.
No-Gap Seal: Because it is continuous, it blocks sightlines into the cabinet and prevents dust from entering through the hinge gap.
The product features a high-quality brushed stainless steel finish. This clean, modern look is designed to match other professional-grade 304 stainless steel handles and locks.
Yes, it is manufactured from 304 stainless steel, which offers excellent resistance to corrosion and oxidation. This makes it suitable for use in humid environments like bathrooms or kitchens.
It is designed for silent operation. The internal ball-bearing mechanism ensures that the door rotates smoothly without the squeaking or grinding sounds common with traditional hinges.
1.Superior Surface Quality: Degol hinges are manufactured with "full material" and are specifically designed to have no sand holes on the surface. This leads to a more polished appearance and greater structural integrity.
2.Resistant to Harsh Environments: They are built to resist rust, abrasion, and corrosion, allowing them to perform reliably in humid environments such as bathrooms.
3.Silent and Smooth Operation: The engineering ensures a smooth opening and closing mechanism that operates without noise.
4.Material Variety: They offer hinges in several robust materials, including 304 and 201 stainless steel, iron, and brass, allowing you to choose the level of strength and corrosion resistance needed for your project.
5.Aesthetic Options: Degol provides a wide range of finishes to match different decors, such as:
Satin Stainless Steel (SSS)
Polished Stainless Steel (PSS)
Antique Brass (AB) and Antique Copper (AC)
Custom Support & Sale:+86-750-3915520
Phone:+86 13725946499
E-mail:info@degolhardware.com
Address: Building 2, No. 898 Jiangmen Avenue Middle, Pengjiang District, Jiangmen CityGuangdong, China 529000
