Publish Time: 2021-09-23 Origin: Site
1. There are two kinds of rotary door handles. If you can see the fixing screws and if you can't see the fixing screws from the outside, first remove the fixing screws at the lock tongue.
2. Remove the lock tongue, and then remove the screws on the baffle in the room. You can see the internal fastening structure. You can disassemble it in sequence. There are special cir clips in some places. You can only remove them by preparing cir clip pliers.
3. If you can't see the lock with fastening screws from the outside, first remove the screws at the lock tongue and remove the lock tongue. There is a small hole on the lock rod between the handle inside the room and the door. You can buy the accessories of the lock or find a sharp object by yourself.
4. Insert into the small hole and pull out the head of the door handle while pressing. After the rotating head is pulled out, rotate the fixed metal plate on the lock rod close to the door and remove it. Then you will see two fixed screws. Remove the screws and fixed iron sheet, and you can remove the whole lock outside the room.