Publish Time: 2021-07-15 Origin: Site
1. Measure the installation hole distance of the handle with a tape measure.
2. Use the handle to draw down the cabinet door panel, and measure the installation position on the cabinet door (closet or cabinet).
3. Choose a suitable size drill bit, plug in the power to start the electric drill, and use the drill bit to drill the screw mounting holes.
4. Hold the handle on the outside, and thread the screws from the inside of the cabinet to the outside on the inside.
5. Align the screws with the handle mounting holes and tighten them with a screwdriver.
6. The installation is complete.