DPL1001 Fire Proof Door Push Bar Weather Resistant For Exterior Emergency Door Parts

Product Introduction

The DEGOL DPL1001 Fire Proof Door Push Bar Weather Resistant For Exterior Emergency Door Parts is an architectural emergency exit hardware product intended for compatible commercial exit door applications.

Featuring a horizontal push bar operation concept, the DPL1001 is designed for projects requiring convenient mechanical door release from the exit side. It can be considered for commercial buildings, industrial facilities, public-access areas and exterior emergency door installations where the specified hardware configuration meets the project requirements.

The DPL1001 is marketed for fire door and weather-resistant applications. Buyers should confirm the relevant fire door compatibility documents, corrosion resistance performance, exposure limitations and applicable exit hardware standards before final product selection.

For building hardware wholesalers, contractors, door manufacturers and international distributors, DEGOL provides an inquiry channel for product specifications, technical drawings, customization options and wholesale purchasing information.

Whether sourcing panic exit hardware for new construction or door hardware replacement projects, customers can contact DEGOL Hardware to discuss the DPL1001 model and the requirements of their target market.

Product Definition

What Is a Fire Door Push Bar?

A fire door push bar, also known as a panic exit bar or panic exit device, is a mechanical door hardware assembly designed to release a compatible door's latching mechanism through pressure applied to a horizontal bar.

The principal function of a panic exit device is to permit rapid and straightforward door release from the escape side without requiring a separate key operation.

Panic exit bars are commonly used on doors serving public areas, commercial buildings, schools, hospitals and other environments where emergency evacuation requirements may apply.

How Does a Panic Exit Push Bar Work?

When the horizontal push bar is pressed, the internal release mechanism retracts or disengages the compatible latch assembly, allowing the door to open in the direction of escape.

Once released, the device returns to its normal operating position through its internal mechanical mechanism.

The exact latch arrangement, return mechanism and locking-point configuration vary according to the product design.

Fire Door and Weather Resistance Considerations

A fire door panic device must be evaluated as part of an approved fire-rated door assembly. Fire door compatibility is not established by a product name alone.

For exterior applications, weather resistance also depends on the materials, surface treatment, corrosion protection, installation position and tested environmental performance of the complete hardware assembly.

Under EN 1125, panic exit devices operated by a horizontal bar have specified performance and testing requirements. Additional fire performance testing determines suitability for fire- or smoke-resisting door assemblies.

Product Specification

Technical Drawing & Dimensions

Accurate installation dimensions are essential for selecting emergency exit panic hardware, particularly for fire doors and commercial doors subject to building regulations.

The DPL1001 technical drawing should be checked before door preparation, drilling or manufacturing.

Important Dimensions

Technical Documentation Available Upon Request

Customers can contact DEGOL for the following information:

• DPL1001 product dimensional drawing

• Push bar and housing measurements

• Mounting hole locations

• Door preparation requirements

• Compatible latch and strike arrangement

• Installation instructions

• Product material and surface finish information

• Fire door compatibility documentation, where applicable

• Environmental resistance information

The installation template must correspond to the exact supplied DPL1001 configuration.

Material & Surface Finish

Material quality and surface treatment are important considerations for panic exit hardware exposed to frequent operation and changing environmental conditions.

For outdoor emergency door projects, product selection should account for humidity, rainfall exposure, environmental contaminants and potential corrosion.

The exact construction materials and corrosion resistance performance of the DPL1001 must be confirmed from the product documentation.

Surface Finish Options

Buyers may request information regarding silver, black, stainless-steel appearance or other project finishes, subject to DEGOL's confirmed production options.

Weather Resistance Requirements

When selecting exit hardware for exterior doors, buyers should request information about corrosion testing, water exposure limitations, finish durability and recommended installation environments.

A weather-resistant product description should not be interpreted as waterproof or suitable for unrestricted outdoor exposure without the manufacturer's supporting test data.

Applications

The DEGOL DPL1001 is intended for consideration in building projects where horizontal panic exit hardware may be required.

1. Commercial Building Emergency Exits

Emergency exit push bars can provide a practical release mechanism for compatible exit doors in office towers, commercial properties and administrative buildings.

2. Industrial Facilities and Warehouses

Panic exit devices are commonly specified for suitable escape doors in workshops, manufacturing facilities, warehouses and logistics buildings.

3. Shopping Centers and Retail Buildings

Horizontal push bars can be part of emergency exit arrangements in public-access commercial spaces.

4. Schools and Educational Buildings

Panic hardware may be used on exit doors serving corridors, assembly areas and other locations where emergency evacuation is considered.

5. Hospitals and Healthcare Facilities

Compatible panic exit hardware may be selected for designated escape routes, subject to accessibility and building safety requirements.

6. Hotels and Hospitality Buildings

Emergency door push bars may form part of fire and evacuation strategies in hotel corridors, service areas and other designated exit locations.

7. Exterior Emergency Exit Doors

A weather-resistant configuration may be considered for doors exposed to outdoor conditions when the environmental performance is adequately documented.

8. Fire Door Hardware Projects

Fire door panic devices can be specified only where the exit device has appropriate evidence of suitability for the relevant rated door assembly.

Suitable Door Types

Door Compatibility Notice

Panic hardware should be selected as part of the complete door assembly. The device must not interfere with emergency release, door closers, hinges, latching components or any required fire-rated operation.

Installation Guide

Step 1 – Verify Door and Project Requirements

Confirm the door material, dimensions, opening direction, location and applicable fire or emergency exit regulations.

Step 2 – Review the Product Technical Drawing

Check the official DPL1001 installation drawing and supplied hardware configuration before preparing the door.

Step 3 – Determine the Mounting Position

Locate the correct position for the horizontal push bar according to the manufacturer's mounting template and local accessibility requirements.

Step 4 – Prepare the Door Mounting Points

Mark and drill the required mounting holes using an approved template and appropriate equipment.

Step 5 – Install the Push Bar Assembly

Secure the device to the inside face of the compatible exit door using the specified mounting components.

Step 6 – Install the Latch and Strike Components

Fit the locking and receiving components according to the manufacturer's installation instructions.

Step 7 – Check the Mechanical Release Function

Press the horizontal bar and confirm that the latch releases correctly and that the door opens in the required direction.

Step 8 – Verify Door Closing and Relatching

Where a door closer is required, ensure that the door closes and relatches correctly after release.

Step 9 – Perform Final Inspection

Check the push bar movement, door alignment, latch engagement, fastener security and any required inspection procedures.

Safety Notice: Panic exit hardware is life-safety equipment. Installation, inspection and maintenance should follow the approved device instructions, applicable codes and the requirements of the complete door assembly.

Product Advantages

1. Emergency Exit Hardware Configuration

The horizontal bar operating concept supports convenient mechanical release of compatible exit doors.

2. Simple Push Operation

A panic bar is intended to allow door release through a straightforward horizontal pushing action, supporting emergency escape requirements when correctly specified and installed.

3. Commercial Building Applications

The DPL1001 product category is relevant to commercial buildings, schools, hotels, warehouses and other architectural projects.

4. Exterior Door Application Potential

The weather-resistant product positioning makes it relevant for exterior emergency door inquiries, subject to verified environmental performance.

5. Fire Door Hardware Sourcing

The model may be considered for fire door hardware procurement when the selected device configuration has the required supporting approval.

6. Integration with Door Hardware Systems

Panic hardware is typically selected together with compatible door closers, hinges, strikes and exterior trim components.

7. Wholesale Procurement Opportunities

DEGOL provides an inquiry channel for bulk orders, technical information and project-specific purchasing requirements.

8. OEM / ODM Customization Discussion

Distributors and brand owners can discuss packaging, finishes and other feasible customization requirements with DEGOL.

9. Technical Documentation Support

Buyers can request technical drawings, installation data and compliance information to support product evaluation.

OEM / ODM Service

DEGOL Hardware welcomes OEM and ODM inquiries for architectural emergency exit hardware, including the DPL1001 model.

International distributors, building material wholesalers, project contractors and door hardware brands can discuss customization requirements based on manufacturing feasibility and order quantities.

Customization Notice

Any modification affecting the safety-critical operation of a panic exit device must be reviewed for its effect on product conformity, certification and compatibility.

Packaging & Order Information

For faster quotation processing, buyers are encouraged to provide the product model, quantity, installation country, door specifications, required certificates, finish preference and expected delivery schedule.

Factory Capability

Jiangmen Degol Hardware Co., Ltd. – Architectural Door Hardware Supplier in China

DEGOL Hardware offers architectural hardware sourcing services for overseas distributors, project buyers and building material importers.

The company's product range covers door locks, door handles, hinges, door closers and related architectural hardware categories.

Architectural Door Hardware Product Range

DEGOL provides a centralized contact point for buyers searching for different mechanical door hardware products.

Emergency Exit Hardware Supply

International buyers can inquire about DPL1001 panic exit hardware, available configurations, installation information and applicable product documentation.

Wholesale and Project Procurement

DEGOL accepts business inquiries for bulk orders, construction project supply and distribution requirements.

OEM / ODM Service

Customers may discuss private labeling, packaging, product finishes and project-specific customization requirements.

Product and Technical Documentation

Buyers may request information about product dimensions, installation instructions, material specifications and applicable certifications.

International Business Contact

Company: Jiangmen Degol Hardware Co., Ltd.

Website: degolhardware.com 

WhatsApp: +86 13725946499

Email: info@degolhardware.com

FAQ – DPL1001 Fire Proof Door Push Bar

Q1: What is the DEGOL DPL1001 Fire Proof Door Push Bar?

The DPL1001 is an emergency exit push bar model offered for consideration in compatible commercial and architectural door hardware applications.

Q2: What is the purpose of a panic exit push bar?

A panic exit push bar provides a mechanical door release function through pressure applied to a horizontal bar, allowing a compatible exit door to be opened from the escape side.

Q3: Is the DPL1001 suitable for fire-rated doors?

Fire door suitability must be confirmed through applicable fire performance testing and approval for the specific door and hardware combination. The product name alone does not establish a fire rating.

Q4: Is the DPL1001 weather resistant?

The model is described as weather resistant. However, specific corrosion resistance, water exposure and environmental performance ratings require confirmation from official product documentation.

Q5: Can the DPL1001 be installed on exterior emergency exit doors?

Exterior installation may be considered when the device materials, environmental performance, mounting arrangement and exit hardware requirements are suitable for the project.

Q6: What door materials are compatible with the DPL1001?

Potential applications include suitable steel, metal and wooden doors, subject to the official installation requirements and approved hardware configuration.

Q7: Does the DPL1001 comply with EN 1125?

EN 1125 is a relevant European standard for panic exit devices operated by a horizontal bar. Compliance for DPL1001 has not been independently verified and should be confirmed using valid product documents.

Q8: Is the DPL1001 CE certified?

The model's CE marking status is not currently verified. Buyers should request the relevant conformity and performance documentation for their intended market.

Q9: Can the panic bar be used on double doors?

Double-door compatibility depends on the device configuration, active and inactive leaf arrangement, latching system and approved installation requirements.

Q10: Can this panic bar be used with a door closer?

Compatible panic exit devices are commonly combined with door closers, but the selected components must be suitable for the specific door and intended operation.

Q11: What materials are used in DPL1001?

The exact push bar, housing and internal component materials should be confirmed with DEGOL using the current DPL1001 product specification.

Q12: What are the dimensions of the DPL1001 push bar?

The overall dimensions, mounting hole spacing, bar length and compatible door sizes require confirmation from the official DPL1001 technical drawing.

Q13: Does DEGOL offer OEM / ODM service for panic bars?

DEGOL accepts OEM and ODM inquiries for branding, packaging and customization requirements, subject to technical feasibility and commercial confirmation.

Q14: Can I purchase DPL1001 emergency exit push bars in bulk?

Wholesale customers can contact DEGOL to discuss order quantity, available product configuration, MOQ, sample availability and pricing.

Q15: How can I request a DPL1001 wholesale quotation?

Contact DEGOL Hardware via WhatsApp, email or its official website. Include model DPL1001, quantity, target market, technical requirements and expected delivery details.

Contact DEGOL – Request a Wholesale Quote