LH1003 – Stainless Steel L-Shaped Tubular Door Lever Handle on Round Rose with Euro Profile Keyhole Escutcheons
| Product Attribute | Specification |
|---|---|
| Model Number | LH1003 |
| Lever Length | 130 mm |
| Lever Diameter | Ø19 mm |
| Lever Projection | 62 mm |
| Rose Dimensions | Ø50 × 4 mm |
| Spindle Size | 8 × 8 mm |
| Suitable Door Thickness | 35–55 mm |
| Fixing Screw Reference | M4, 6 pcs shown |
| Keyhole Escutcheon | Separate Euro Profile Design |
Note: Dimensions are based on the supplied LH1003 engineering drawing. Final material grade, finish, locking compatibility, included accessories and mounting configuration should be confirmed before ordering.
PRODUCT INTRODUCTION
The DEGOL LH1003 Stainless Steel L-Shaped Tubular Door Lever Handle on Round Rose combines a minimalist straight lever design with a clean circular mounting rose, creating a contemporary architectural hardware solution for residential, hospitality and commercial door applications.
Featuring a distinctive L-shaped tubular lever structure, the LH1003 incorporates a straight cylindrical gripping section connected to the mounting assembly through an angled neck. This simple geometric design complements modern architectural interiors and coordinated stainless steel door hardware collections.
The lever measures 130 mm in length with a Ø19 mm tubular diameter, providing a clearly defined gripping surface for everyday door operation.
The handle is mounted on a compact Ø50 mm round rose with a 4 mm thickness, creating a streamlined appearance without the visual bulk of a traditional rectangular backplate.
The LH1003 product illustration also features separate circular Euro profile keyhole escutcheons, allowing the handle and cylinder opening to be positioned independently according to a compatible lock installation.
With a 62 mm lever projection and an 8 × 8 mm square spindle, the LH1003 provides a practical configuration for compatible lever-operated mortise locking systems.
Its stainless steel construction offers a suitable material option for architectural door hardware. Buyers can discuss the required stainless steel grade and surface finish according to their intended environment and project specifications.
As an architectural hardware manufacturer and export supplier, DEGOL welcomes inquiries from international wholesalers, importers, distributors and construction project buyers seeking stainless steel door lever handles for bulk purchasing and OEM/ODM cooperation.
Key Product Features:
Modern L-shaped stainless steel tubular lever design.
Straight cylindrical handle with a minimalist architectural appearance.
130 mm lever length and Ø19 mm tubular diameter.
Compact Ø50 mm circular rose with 4 mm thickness.
62 mm lever projection.
8 × 8 mm square spindle configuration.
Separate Euro profile keyhole escutcheon design.
Suitable for compatible 35–55 mm thick doors.
Designed for compatible residential, hotel and commercial door installations.
OEM/ODM customization and wholesale purchasing inquiries welcomed.
APPLICATIONS
The LH1003 Stainless Steel Tubular Door Lever Handle is suitable for consideration in architectural hardware projects requiring a modern lever handle, compact round rose and compatible mortise locking arrangement.
Residential Buildings and Apartments
Suitable for modern residential interiors, apartment doors, housing developments and renovation projects requiring contemporary stainless steel door handles.
Hotels and Hospitality Projects
An option for hotel guest rooms, serviced apartments and hospitality interior doors where compatible mechanical mortise locking systems are specified.
Office Buildings and Commercial Interiors
The straight tubular design complements office doors, meeting rooms, administrative spaces and modern commercial interior environments.
Residential Construction and Renovation Projects
A practical design option for property development and renovation projects requiring coordinated lever handles across multiple compatible door installations.
Architectural and Interior Design Projects
The simple L-shaped lever and circular rose provide a clean visual appearance suitable for minimalist and contemporary architectural interiors.
Wholesale and Hardware Distribution
A relevant product for architectural hardware wholesalers, door hardware importers, building material distributors and hardware retailers seeking stainless steel lever handles on round roses.
The LH1003 is particularly relevant to wholesale sourcing inquiries from South American markets, including Brazil, Chile, Peru, Colombia and Argentina.
For high-traffic, security-rated, fire-rated or exposed exterior applications, buyers should verify the required product performance and applicable compliance requirements separately.
SUITABLE DOOR TYPES
The DEGOL LH1003 L-Shaped Stainless Steel Door Lever Handle can be considered for various door installations, subject to door construction, lock compatibility and mounting requirements.
Wooden Interior Doors
Suitable for compatible residential, apartment, hotel and office interior wooden doors.
Solid Timber Doors
Applicable where the door thickness, mortise lock dimensions and fixing arrangement meet the product specifications.
Metal Doors
Can be considered for metal doors with suitable mounting preparation, reinforcement where necessary and compatible locking hardware.
Apartment Doors
A contemporary architectural hardware option for residential apartments and property development projects.
Hotel Room Doors
Suitable for selected hospitality interior installations where the door thickness, locking mechanism and project specifications are compatible.
Office and Commercial Interior Doors
Applicable to compatible office, meeting room and administrative doors requiring lever-operated mortise lock hardware.
Door Compatibility Note:
The LH1003 engineering drawing specifies a reference door thickness range of 35–55 mm.
Before bulk ordering, buyers should confirm the door thickness, 8 mm square spindle, mortise lock dimensions, cylinder arrangement and fixing positions.
The separate keyhole escutcheons must be aligned with the selected lock and cylinder. The supplied drawing does not specify a fixed PZ centre distance.
For South American construction projects, compatibility with locally selected mortise locks, Euro profile cylinders and applicable installation standards should be checked in advance.
TECHNICAL DRAWINGS & LOCK COMPATIBILITY
The DEGOL LH1003 Door Lever Handle Set features a tubular L-shaped lever, circular mounting rose and separate Euro profile keyhole escutcheon design.
Key Engineering Dimensions
Lever Length: 130 mm.
Lever Diameter: Ø19 mm.
Lever Projection: 62 mm.
Rose Diameter: Ø50 mm.
Rose Thickness: 4 mm.
Square Spindle: 8 × 8 mm.
Fixing Screw Reference: M4.
Reference Door Thickness: 35–55 mm.
Dimensional Tolerances
According to the supplied engineering drawing:
Lever Length Tolerance: ±1.0 mm.
Lever Diameter Tolerance: ±0.2 mm.
Lever Projection Tolerance: ±1.0 mm.
Rose Diameter Tolerance: ±0.5 mm.
Rose Thickness Tolerance: ±0.2 mm.
Spindle Size Tolerance: ±0.1 mm.
L-Shaped Tubular Lever Design
The LH1003 features a straight cylindrical lever connected to the mounting assembly through an angled neck.
The Ø19 mm tubular handle provides a consistent gripping profile, while the 130 mm lever length and 62 mm projection define the handle's overall geometry.
The design is suitable for architectural projects requiring a clean, modern stainless steel lever handle appearance.
Round Rose Design
The LH1003 incorporates a circular mounting rose measuring Ø50 mm in diameter and 4 mm in thickness.
The round rose provides a compact mounting appearance suitable for modern interior door hardware collections.
The illustrated handle assembly includes internal mounting components. The final fixing arrangement and spring mechanism specifications should be confirmed before ordering.
Euro Profile Keyhole Escutcheons
The supplied product illustration features separate circular escutcheons with Euro profile keyhole openings.
These components are designed to accommodate a compatible Euro profile cylinder arrangement when installed with a suitable mortise lock.
Because the lever rose and keyhole escutcheon are separate components, their relative positions must be determined according to the selected lock body and door preparation.
Important: The supplied LH1003 engineering drawing does not specify a fixed PZ measurement. Buyers should not assume compatibility with a particular 72 mm, 85 mm or 92 mm lock centre distance without checking the selected lock and installation configuration.
Mortise Lock Compatibility
The LH1003 is intended for use with a compatible lever-operated mortise lock featuring an appropriate 8 mm square spindle follower.
Buyers should verify:
Mortise lock spindle dimensions.
Lock body and latch operating requirements.
Euro profile cylinder compatibility.
Handle and escutcheon fixing positions.
Door thickness and mounting clearances.
Required spindle engagement.
The mortise lock and cylinder are separate hardware components unless specifically included in the confirmed quotation.
Spindle and Fixing Requirements
The engineering drawing specifies:
Spindle Size: 8 × 8 mm.
Fixing Screw Type: M4.
Reference Screw Quantity: 6 pieces, as indicated in the installation specifications.
Actual spindle length, screw selection and fixing method depend on the door thickness and approved mounting configuration.
Surface Finish Options
The reference engineering drawing illustrates the following stainless steel finishes:
SSS: Satin Stainless Steel – Brushed Silver.
PSS: Polished Stainless Steel – Mirror Silver.
PVD-GD: PVD Gold.
PVD-BK: PVD Black.
Available finishes and minimum order requirements for LH1003 should be confirmed with DEGOL before placing an order.
Material Selection
The supplied engineering reference includes a comparison of stainless steel grades 304 and 201.
Stainless Steel 304: Generally provides better corrosion resistance and is often preferred for applications requiring greater environmental resistance.
Stainless Steel 201: Can provide a cost-effective material option for suitable indoor applications.
Customers should confirm the available material grade, required environmental resistance and relevant product documentation before ordering.
Technical Note:
All measurements are based on the supplied LH1003 engineering drawing. Final production specifications, dimensional tolerances, mounting details, handle handing and included accessories should be confirmed against approved product documentation.
INSTALLATION GUIDE
The LH1003 Stainless Steel L-Shaped Lever Handle on Round Rose is intended for installation with a compatible mortise lock and mounting system.
The following instructions provide general installation guidance.
Step 1: Confirm Door and Lock Compatibility
Check that the door thickness is within the specified 35–55 mm range and that the selected mortise lock supports an 8 mm square spindle.
Confirm the lock body dimensions and cylinder arrangement before installation.
Step 2: Prepare the Door
Mark the spindle opening, mortise lock position and any required Euro profile cylinder opening according to the approved installation drawing.
Step 3: Install the Mortise Lock
Fit the compatible mortise lock body into the prepared door opening and secure it according to the lock manufacturer's instructions.
Step 4: Install the Square Spindle
Insert the correctly sized 8 × 8 mm square spindle through the mortise lock follower.
Confirm sufficient engagement with the lever handle assemblies.
Step 5: Position the Round Roses
Align the circular mounting roses with the spindle opening and the approved fixing positions.
Ensure the mounting components sit correctly against the door surfaces.
Step 6: Secure the Lever Handle Assembly
Fit the lever handles onto the spindle and secure the mounting components using the appropriate fixing hardware.
The reference engineering drawing specifies M4 fixing screws.
Step 7: Install the Keyhole Escutcheons
Position the separate Euro profile keyhole escutcheons around the compatible cylinder opening.
Align the escutcheons with the selected mortise lock and cylinder configuration.
Secure the components according to the approved mounting instructions.
Step 8: Test Handle and Lock Operation
Check the lever movement, latch retraction, handle return and cylinder operation.
Ensure the installed assembly operates smoothly without excessive play or interference.
Installation Note:
Installation requirements may vary depending on the door material, selected mortise lock and fixing arrangement.
The exact package contents, including lever handles, round roses, keyhole escutcheons, spindle, fixing screws, mortise lock and cylinder, should be confirmed before ordering.
Professional installation is recommended for commercial and construction project applications.
FACTORY CAPABILITY
DEGOL Hardware – Professional Architectural Door Hardware Manufacturer
Jiangmen Degol Hardware Co., Ltd. is a China-based hardware manufacturer and export supplier providing architectural hardware solutions for international importers, wholesalers, distributors and construction project buyers.
DEGOL supplies door hardware, glass hardware, furniture hardware, window hardware and related products for residential and commercial applications.
Manufacturing and Product Supply
DEGOL's manufacturing and supply operations cover product development, production, assembly, quality control, packaging and export coordination.
The company supports wholesale hardware sourcing and project-based purchasing requirements for international customers.
OEM & ODM Customization
DEGOL welcomes OEM and ODM inquiries from architectural hardware wholesalers, distributors and private-label customers.
Depending on product specifications and manufacturing feasibility, customization inquiries may include:
Custom logos and private-label branding.
Alternative stainless steel surface finishes.
Customized lever dimensions and configurations.
Customized round rose and escutcheon designs.
Customized packaging and carton labeling.
Product development based on customer drawings or samples.
All customization requirements are subject to technical review and commercial confirmation.
Quality Control
DEGOL incorporates quality control into its manufacturing and supply processes, with attention to material requirements, dimensional consistency, product appearance, assembly and packaging.
Customers may request available technical specifications, material information and relevant quality documentation before confirming wholesale orders.
International Wholesale Supply
DEGOL welcomes long-term cooperation with architectural hardware importers, building material wholesalers, distributors and construction contractors.
The company supports international B2B sourcing inquiries, including customers supplying stainless steel door hardware to South American residential, hospitality and commercial construction markets.
PACKAGING & EXPORT INFORMATION
DEGOL provides wholesale purchasing and export support for international customers interested in the LH1003 stainless steel tubular door lever handle set.
Product Packaging
Packaging arrangements can be discussed according to the selected product configuration, order quantity and customer requirements.
Available packaging inquiries may include:
Protective individual product packaging.
Retail boxes and master cartons.
Custom logo and private-label packaging.
Product labels and carton markings.
Export carton and palletizing requirements.
Wholesale Orders
Customers can contact DEGOL to confirm the applicable minimum order quantity, sample availability, wholesale pricing and estimated production lead time.
Export and Shipping
DEGOL welcomes international shipment inquiries and can discuss export arrangements according to the destination country, order quantity and shipping requirements.
Customers may request quotations based on applicable trading terms, including FOB or CIF, subject to commercial confirmation.
Information Required for an Accurate Quotation:
Product Model: LH1003.
Required Order Quantity: Specify the requested quantity.
Material Requirements: Confirm the required stainless steel grade.
Preferred Surface Finish: SSS, PSS, PVD Gold, PVD Black or other requested finish.
Product Configuration: Confirm the required keyhole escutcheons, mounting accessories and lock compatibility.
Customization Requirements: Specify any requested logo, dimension or configuration changes.
Packaging Requirements: Standard or private-label packaging.
Destination: Country and port.
Preferred Shipping Terms: FOB, CIF or other agreed Incoterms.
Final carton quantities, packing dimensions, shipping arrangements, payment terms and production lead times will be confirmed during the quotation process.
FAQ
Q1: What type of door handle is the LH1003?
The LH1003 is an L-shaped stainless steel tubular lever handle mounted on a Ø50 mm round rose. The illustrated product configuration also features separate Euro profile keyhole escutcheons for compatible door locking systems.
Q2: What are the dimensions of the LH1003 door lever handle?
The LH1003 features a 130 mm lever length, Ø19 mm tubular diameter, 62 mm lever projection and Ø50 × 4 mm round rose. It uses an 8 × 8 mm square spindle configuration.
Q3: What is the difference between an L-shaped lever handle and a return-to-door lever handle?
An L-shaped lever handle typically features a straight gripping section connected through an angled neck, while a return-to-door lever has a free end that curves back toward the door. The LH1003 features a straight tubular lever with an L-shaped connection.
Q4: Is the LH1003 compatible with Euro profile mortise locks?
The illustrated LH1003 configuration includes separate Euro profile keyhole escutcheons and an 8 mm square spindle. Buyers should confirm the selected mortise lock body, cylinder dimensions and installation positions before ordering. No fixed PZ centre distance is specified in the supplied drawing.
Q5: What door thickness is suitable for the LH1003?
The engineering drawing specifies a reference door thickness range of 35–55 mm. Actual compatibility depends on the selected spindle length, fixing arrangement and mortise lock specifications.
Q6: Is the LH1003 available in stainless steel 304 or 201?
The engineering reference includes a comparison of stainless steel grades 304 and 201. Customers should contact DEGOL to confirm which material grades are available for LH1003 and select the appropriate specification for their intended application.
Q7: What surface finishes are available for the LH1003?
The reference drawing illustrates satin brushed stainless steel, polished stainless steel, PVD gold and PVD black. Buyers can contact DEGOL to confirm available finishes, customization requirements and applicable minimum order quantities.
Q8: Does the LH1003 include keyhole escutcheons, a mortise lock and installation accessories?
The product illustration shows lever handle assemblies, separate keyhole escutcheons and installation components. However, the exact package contents depend on the approved product configuration. Customers should confirm whether the quotation includes the spindle, fixing screws, escutcheons, mortise lock, cylinder or other accessories.
Q9: Can DEGOL provide OEM/ODM customization, samples and wholesale pricing?
DEGOL welcomes OEM and ODM inquiries for custom logos, surface finishes, packaging and product configurations. Customers can also request information about sample availability, applicable MOQ and wholesale pricing.
Q10: Can DEGOL supply LH1003 stainless steel door handles to South American markets?
DEGOL welcomes wholesale and project inquiries from importers, distributors and contractors serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets. Buyers can provide their order quantity, destination country and preferred shipping terms to discuss export arrangements.
CONTACT DEGOL – REQUEST A WHOLESALE QUOTE
Looking for a stainless steel L-shaped tubular door lever handle on round rose with Euro profile keyhole escutcheons for your architectural door hardware range, wholesale distribution business or construction project?
Contact DEGOL Hardware for product specifications, technical drawings, available finishes, sample information, OEM/ODM customization and wholesale pricing.
Product Model: LH1003
Product Name: Stainless Steel L-Shaped Tubular Door Lever Handle on Round Rose with Euro Profile Keyhole Escutcheons
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Whether you are an architectural hardware wholesaler, importer, building material distributor or construction project buyer, DEGOL welcomes your product sourcing inquiries.
For faster quotation processing, please provide your required quantity, preferred material grade, surface finish, lock compatibility requirements, packaging requirements and destination country.
Request Your LH1003 Stainless Steel L-Shaped Tubular Door Lever Handle Wholesale Quote Today.