The horizontal and vertical installation of a set of furniture handles should be unified (including the shape of the single-hole handle), but the drawer panels, up-turn doors, and down-turn door panel handles should be installed horizontally. 2. The upper cabinet door panel handle is installed unde
Put a bit of paper tape on the door panel, and draw two marks according to the hole distance on the handle. Now the normal specification of the handle is the 32mm system, that is, the distance between the two holes is an integer multiple of 32, such as: 64, 96, 128, 160, etc. Etc. The length of the
Degol : How to install cabinet handle ?1. Measure the installation hole distance of the handle with a tape measure.2. Use the handle to draw down the cabinet door panel, and measure the installation position on the cabinet door (closet or cabinet).3. Choose a suitable size drill bit, plug in the pow