LH1011 – Stainless Steel Straight Rectangular Door Lever Handle on Square Rose for Modern Interior and Hotel Doors
| Product Attribute | Specification |
|---|---|
| Model Number | LH1011 |
| Lever Length | 135 mm |
| Lever Height | 60 mm |
| Lever Section | 20 × 10 mm Rectangular |
| Rose Size | 53 × 53 mm |
| Rose Thickness | 10 mm |
| Escutcheon Size | 53 × 53 mm |
| Escutcheon Thickness | 10 mm |
| Suitable Door Thickness | 35–55 mm |
| Spindle Size | 8 × 8 mm |
| Fixing Screws | M4 × 4 pcs (Drawing Reference) |
Note: Specifications are based on the supplied LH1011 engineering drawing. Final material grade, mounting configuration, lock compatibility and included accessories should be confirmed before ordering.
PRODUCT INTRODUCTION
The DEGOL LH1011 Stainless Steel Straight Rectangular Door Lever Handle on Square Rose is a modern architectural door handle featuring a clean linear profile, flat rectangular gripping section and matching square mounting rose.
Designed for compatible residential, hotel and commercial interior doors, the LH1011 combines minimalist geometric styling with a practical lever-operated door hardware configuration.
Unlike traditional round tubular door handles, the LH1011 features a straight rectangular lever with a 20 × 10 mm flat bar section, creating a distinctive contemporary architectural appearance.
The handle incorporates a clean right-angle transition between the mounting stem and the horizontal gripping section.
Its straight rectangular profile provides a minimalist appearance that complements modern architectural interiors, contemporary furniture hardware and geometric door design concepts.
The LH1011 features a 135 mm lever length and 60 mm lever height, providing a balanced configuration for compatible lever-operated door applications.
The handle is mounted on a 53 × 53 mm square rose with a thickness of 10 mm, creating a coordinated geometric appearance between the lever and mounting assembly.
Matching 53 × 53 mm square keyhole escutcheons are illustrated in the engineering drawing, providing a coordinated appearance for compatible cylinder lock installations.
Manufactured from stainless steel, the LH1011 is designed for architectural hardware applications where durability, appearance and suitable mechanical performance are important.
The reference product image features a satin brushed stainless steel appearance, emphasizing the straight edges, rectangular gripping profile and clean geometric design.
The engineering drawing also illustrates polished stainless steel, PVD gold and PVD black finishes.
These decorative finish references provide design options for modern apartments, hotel guest rooms, office buildings and contemporary commercial interiors.
The LH1011 is intended for installation with compatible lever-operated latch or mortise lock systems.
The engineering drawing specifies an 8 × 8 mm square spindle and a reference door thickness range of 35–55 mm.
The illustrated hardware includes fixing screws, a square spindle and an Allen key. Final package contents should be confirmed before ordering.
For international architectural hardware wholesalers, importers and construction project buyers, the LH1011 offers a modern rectangular lever handle design for wholesale purchasing and OEM/ODM cooperation.
Key Product Features:
Modern straight rectangular lever design.
Minimalist geometric architectural appearance.
Flat bar gripping profile with clean edges.
20 × 10 mm rectangular lever section.
135 mm lever length.
60 mm lever height.
53 × 53 mm square mounting rose.
10 mm rose thickness.
Matching square keyhole escutcheons illustrated.
Stainless steel construction.
Compatible with 8 × 8 mm square spindle systems.
Reference door thickness range of 35–55 mm.
Satin, polished, PVD gold and PVD black finish references.
Suitable for selected residential, hotel and commercial interior doors.
OEM/ODM customization and wholesale purchasing inquiries welcomed.
APPLICATIONS
The LH1011 Stainless Steel Straight Rectangular Door Lever Handle is suitable for architectural projects requiring modern geometric door hardware with a clean stainless steel appearance.
Residential Buildings and Apartments
Suitable for modern residential interiors, apartment doors, housing developments and renovation projects requiring contemporary stainless steel lever handles.
Hotels and Hospitality Projects
A design option for hotel guest rooms, serviced apartments, boutique hotels and hospitality interior doors where compatible mechanical locking systems are specified.
Office Buildings and Commercial Interiors
The straight rectangular profile complements office doors, meeting rooms, administrative spaces and modern commercial interior environments.
Architectural and Interior Design Projects
The minimalist flat bar design provides an alternative to conventional round tubular door handles for architects, interior designers and property developers seeking geometric architectural hardware.
Residential Construction and Renovation
Suitable for consideration in new residential construction and refurbishment projects requiring coordinated square rose door handle designs.
Hospitality and Commercial Renovation
Can be considered for selected hotel, office and commercial renovation projects requiring modern rectangular stainless steel door hardware.
Wholesale and Hardware Distribution
A relevant product for architectural hardware wholesalers, door hardware importers, building material distributors and professional hardware retailers seeking contemporary rectangular lever handle designs.
The LH1011 is particularly relevant to international wholesale and project sourcing inquiries from South American markets, including Brazil, Chile, Peru, Colombia and Argentina.
Application Note:
The LH1011 is intended for compatible architectural door applications.
For high-traffic, fire-rated, security-rated or exposed exterior installations, buyers should verify the required material grade, product performance, lock compatibility and applicable local standards before specification.
SUITABLE DOOR TYPES
The DEGOL LH1011 Rectangular Stainless Steel Door Lever Handle on Square Rose can be considered for various compatible door constructions, subject to lock specifications, mounting requirements and installation conditions.
Wooden Interior Doors
Suitable for compatible residential, hotel, apartment and office wooden interior doors.
Solid Timber Doors
Applicable where the door thickness, latch or mortise lock dimensions and fixing arrangement meet the product requirements.
Metal Doors
Can be considered for metal doors with appropriate mounting preparation, reinforcement where required and compatible locking hardware.
Apartment Doors
A contemporary architectural hardware option for apartment buildings and residential property development projects.
Hotel Room Doors
Suitable for selected hospitality interior installations where the required mechanical locking configuration and installation specifications are compatible.
Office and Commercial Interior Doors
Applicable to compatible office, meeting room and administrative doors requiring lever-operated latch or mortise lock hardware.
Door Compatibility Note:
The LH1011 engineering drawing specifies a reference door thickness range of 35–55 mm.
Before bulk ordering, buyers should confirm:
Required door thickness.
Square spindle dimensions.
Mortise lock or latch compatibility.
Fixing hole positions.
Square rose mounting requirements.
Required handle orientation.
Keyhole escutcheon compatibility.
Applicable local installation standards.
For South American construction projects, compatibility with locally selected mortise locks, door preparations and installation requirements should be checked in advance.
TECHNICAL DRAWINGS & LOCK COMPATIBILITY
The DEGOL LH1011 Door Lever Handle Set features a straight rectangular lever, square mounting rose and matching square keyhole escutcheons.
Key Engineering Dimensions
Lever Length: 135 mm.
Lever Height: 60 mm.
Lever Section: 20 × 10 mm rectangular profile.
Rose Size: 53 × 53 mm.
Rose Thickness: 10 mm.
Escutcheon Size: 53 × 53 mm.
Escutcheon Thickness: 10 mm.
Suitable Door Thickness: 35–55 mm.
Square Spindle Size: 8 × 8 mm.
Fixing Screw Reference: M4.
Fixing Screw Quantity: 4 pcs as indicated in the engineering drawing.
Allen Key Reference: 3 mm hex key.
Dimensional Tolerances
According to the supplied engineering drawing:
Lever Length Tolerance: ±1.0 mm.
Lever Height Tolerance: ±1.0 mm.
Lever Section Tolerance: ±0.2 mm.
Rose Size Tolerance: ±0.5 mm.
Rose Thickness Tolerance: ±0.2 mm.
Escutcheon Size Tolerance: ±0.5 mm.
Escutcheon Thickness Tolerance: ±0.2 mm.
Spindle Size Tolerance: ±0.1 mm.
Straight Rectangular Lever Design
The LH1011 features a flat rectangular lever with a clean horizontal gripping section.
Unlike conventional cylindrical door handles, the LH1011 incorporates a 20 × 10 mm rectangular lever profile with a straight linear shape.
The handle transitions from the mounting stem into a horizontal rectangular gripping section, creating a modern right-angle architectural appearance.
This geometric design is suitable for contemporary interior door hardware collections where straight lines and minimalist styling are preferred.
Square Rose Mounting Design
The LH1011 incorporates a 53 × 53 mm square mounting rose with a thickness of 10 mm.
The square rose complements the rectangular lever and creates a coordinated geometric appearance.
The supplied product reference illustrates a mounting assembly with a metal fixing plate and handle attachment components.
The final mounting method, internal spring mechanism and fixing arrangement should be confirmed before ordering.
Square Spindle Compatibility
The engineering drawing specifies an 8 × 8 mm square spindle.
The spindle connects the lever handles through a compatible latch or mortise lock operating mechanism.
Buyers should verify the lock follower dimensions, spindle length and mounting requirements before installation.
Mortise Lock and Latch Compatibility
The LH1011 can be considered for compatible lever-operated latch or mortise lock systems.
Before installation, buyers should verify:
Mortise lock or tubular latch compatibility.
Lock follower dimensions.
Square spindle requirements.
Door thickness and mounting clearances.
Square rose fixing positions.
Required spindle length and engagement.
Lever return and latch operation.
The supplied engineering drawing does not establish a fixed PZ centre distance or a specific mortise lock body.
Square Euro Profile Keyhole Escutcheons
The supplied product image illustrates separate square keyhole escutcheons with Euro profile-style openings.
Each escutcheon measures 53 × 53 mm, with a thickness of 10 mm.
These accessories provide a coordinated visual arrangement when the handle is installed with a compatible cylinder lock.
The final cylinder profile, fixing arrangement, centre distance and package inclusion should be confirmed before ordering.
The illustrated keyhole profile does not independently establish compatibility with every Euro profile mortise lock.
Stainless Steel Material Selection
The LH1011 is specified as a stainless steel door lever handle.
Buyers should confirm the actual stainless steel grade available for production.
Common architectural hardware material options include:
Stainless Steel 304
Generally provides higher corrosion resistance.
Often preferred for projects requiring greater environmental resistance.
Suitable for consideration in residential and commercial hardware applications.
Stainless Steel 201
Can provide a cost-effective stainless steel material option.
Generally more suitable for controlled indoor environments.
Can be considered for price-sensitive projects where its corrosion resistance is adequate.
The availability of either grade for LH1011 must be confirmed with DEGOL.
Surface Finish Options
The supplied engineering drawing illustrates the following finishes:
SSS – Satin Stainless Steel
Brushed silver appearance with a matte metallic surface.
PSS – Polished Stainless Steel
Bright silver appearance with a reflective mirror-like surface.
PVD-GD – PVD Gold
Decorative gold appearance produced through PVD coating.
PVD-BK – PVD Black
Decorative black appearance produced through PVD coating.
These finishes provide design options for residential, hospitality and commercial architectural hardware collections.
Actual finish availability, coating specifications, color consistency and applicable minimum order quantities should be confirmed with DEGOL before ordering.
Technical Note:
All measurements are based on the supplied LH1011 engineering drawing. Final production specifications, dimensional tolerances, material grade, mounting configuration, surface finishes and included accessories should be confirmed against approved product documentation.
INSTALLATION GUIDE
The LH1011 Stainless Steel Straight Rectangular Door Lever Handle on Square Rose is intended for installation with a compatible latch or mortise lock and mounting system.
The following steps provide general installation guidance.
Step 1: Confirm Door and Lock Compatibility
Check that the door thickness is within the specified 35–55 mm range.
Verify the 8 × 8 mm square spindle requirements and confirm compatibility with the selected latch or mortise lock.
Step 2: Prepare the Door
Mark the spindle opening, latch or mortise lock position and required fixing locations according to the approved installation drawing.
Confirm the required mounting positions before drilling or cutting.
Step 3: Install the Latch or Mortise Lock
Fit the compatible latch or mortise lock into the prepared door opening.
Secure it according to the lock manufacturer's installation instructions.
Step 4: Install the Square Spindle
Insert the correctly specified 8 × 8 mm square spindle through the lock follower.
Ensure that the spindle is properly aligned and provides sufficient engagement with the lever handle assemblies.
Step 5: Position the Square Rose Mounting Components
Align the square mounting components with the spindle opening and approved fixing positions.
Ensure that the mounting assembly sits correctly against the door surface.
Step 6: Secure the Lever Handle Assembly
Fit the lever handles onto the spindle and secure the mounting components using the appropriate fixing hardware.
The engineering drawing references M4 fixing screws and a 3 mm Allen key.
Confirm that the rectangular lever handles are correctly aligned and oriented for the intended door operation.
Step 7: Install Keyhole Escutcheons if Required
If the selected configuration includes separate square Euro profile keyhole escutcheons, install them according to the selected mortise lock and cylinder specifications.
Step 8: Test Handle Operation
Check lever movement, latch retraction and handle return.
Ensure that the installed assembly operates smoothly without excessive play or interference.
Installation Note:
Installation requirements may vary depending on the door material, selected lock and fixing arrangement.
The exact package contents, including lever handles, square roses, spindle, fixing screws, escutcheons, latch or mortise lock, should be confirmed before ordering.
Professional installation is recommended for commercial and construction project applications.
FACTORY CAPABILITY
DEGOL Hardware – Professional Architectural Door Hardware Manufacturer
Jiangmen Degol Hardware Co., Ltd. is a China-based architectural hardware manufacturer and export supplier serving international importers, wholesalers, distributors and construction project buyers.
DEGOL provides door hardware and related architectural hardware solutions for residential and commercial applications.
Manufacturing and Product Supply
DEGOL supports architectural hardware product sourcing, manufacturing coordination, quality inspection, packaging and export arrangements.
The company welcomes wholesale and project-based purchasing requirements from international customers.
OEM & ODM Customization
DEGOL welcomes OEM and ODM inquiries from architectural hardware wholesalers, distributors and private-label customers.
Depending on product specifications and manufacturing feasibility, customization inquiries may include:
Custom logos and private-label branding.
Alternative stainless steel surface finishes.
Customized rectangular lever dimensions.
Customized flat bar lever profiles.
Customized square rose configurations.
Customized keyhole escutcheon designs.
Customized packaging and carton labeling.
Product development based on customer drawings or samples.
All customization requirements are subject to technical review and commercial confirmation.
Quality Control
DEGOL incorporates quality control into its manufacturing and supply processes, with attention to material requirements, dimensional consistency, product appearance, assembly and packaging.
For stainless steel door lever handles, buyers may request available information about material specifications, surface finish quality, handle operation and relevant product testing.
Customers can also request technical specifications and applicable quality documentation before confirming wholesale orders.
International Wholesale Supply
DEGOL welcomes long-term cooperation with architectural hardware importers, building material wholesalers, distributors and construction contractors.
The company supports international B2B sourcing inquiries, including customers supplying stainless steel door hardware to South American residential, hospitality and commercial construction markets.
PACKAGING & EXPORT INFORMATION
DEGOL provides wholesale purchasing and export support for international customers interested in the LH1011 rectangular stainless steel door lever handle on square rose.
Product Packaging
Packaging arrangements can be discussed according to the selected product configuration, order quantity and customer requirements.
Available packaging inquiries may include:
Protective individual product packaging.
Surface protection for brushed, polished and PVD-coated components.
Retail boxes and master cartons.
Custom logo and private-label packaging.
Product labels and carton markings.
Export carton and palletizing requirements.
Typical Hardware Reference
The supplied engineering drawing illustrates the following hardware:
M4 fixing screws: 4 pcs.
Square spindle: 8 × 8 mm.
Allen key: 3 mm hex.
These components are shown as typical hardware references. The actual included accessories and quantities should be confirmed in the final packing specification.
Wholesale Orders
Customers can contact DEGOL to confirm the applicable minimum order quantity, sample availability, wholesale pricing and estimated production lead time.
Export and Shipping
DEGOL welcomes international shipment inquiries and can discuss export arrangements according to the destination country, order quantity and shipping requirements.
Customers may request quotations based on applicable trading terms, including FOB or CIF, subject to commercial confirmation.
Information Required for an Accurate Quotation:
Product Model: LH1011.
Required Order Quantity: Specify the requested quantity.
Material Requirements: Confirm the required stainless steel grade.
Preferred Surface Finish: Satin, Polished, PVD Gold, PVD Black or another requested finish.
Product Configuration: Confirm the required mounting accessories and lock compatibility.
Door Thickness: Confirm the project door thickness.
Customization Requirements: Specify any requested logo, dimension or configuration changes.
Packaging Requirements: Standard or private-label packaging.
Destination: Country and port.
Preferred Shipping Terms: FOB, CIF or other agreed Incoterms.
Final carton quantities, packing dimensions, shipping arrangements, payment terms and production lead times will be confirmed during the quotation process.
FAQ
Q1: What type of door handle is the LH1011?
The LH1011 is a stainless steel straight rectangular door lever handle featuring a flat bar gripping section and square mounting rose. It is designed for compatible residential, hotel and commercial interior door applications.
Q2: What makes the LH1011 different from conventional round tubular door handles?
The LH1011 features a straight rectangular lever with a 20 × 10 mm flat bar profile rather than a conventional cylindrical gripping section. Its geometric design and square mounting rose create a modern minimalist architectural appearance.
Q3: What are the dimensions of the LH1011 door lever handle?
The LH1011 features a 135 mm lever length, 60 mm lever height, 20 × 10 mm rectangular lever section and 53 × 53 mm square mounting rose with a thickness of 10 mm.
Q4: What door thickness is suitable for the LH1011?
The LH1011 engineering drawing specifies a reference door thickness range of 35–55 mm. Actual compatibility depends on the approved mounting hardware, spindle length and lock configuration.
Q5: What material is used for the LH1011 door lever handle?
The LH1011 is specified as a stainless steel door lever handle. Buyers should contact DEGOL to confirm the available stainless steel grade and material specifications before ordering.
Q6: What surface finishes are available for the LH1011?
The engineering drawing illustrates satin stainless steel, polished stainless steel, PVD gold and PVD black finishes. Customers can contact DEGOL to confirm finish availability, coating specifications and customization requirements.
Q7: Is the LH1011 compatible with mortise locks and Euro profile cylinders?
The LH1011 can be considered for compatible lever-operated latch or mortise lock systems. The reference image also illustrates square Euro profile-style keyhole escutcheons. Buyers should confirm the lock follower dimensions, spindle requirements, cylinder configuration and mounting positions before ordering.
Q8: Does the LH1011 include fixing screws, a spindle and an Allen key?
The engineering drawing illustrates four M4 fixing screws, an 8 × 8 mm square spindle and a 3 mm Allen key as typical hardware. The exact package contents depend on the approved product configuration and should be confirmed before ordering.
Q9: Can DEGOL provide OEM/ODM customization, samples and wholesale pricing?
DEGOL welcomes OEM and ODM inquiries for custom logos, surface finishes, packaging and product configurations. Customers can also request information about sample availability, applicable MOQ and wholesale pricing.
Q10: Can DEGOL supply LH1011 stainless steel door handles to South American markets?
DEGOL welcomes wholesale and project inquiries from importers, distributors and contractors serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets. Buyers can provide their required quantity, preferred finish, destination country and shipping terms to discuss export arrangements.
CONTACT DEGOL – REQUEST A WHOLESALE QUOTE
Looking for a stainless steel straight rectangular door lever handle on square rose for your architectural door hardware range, wholesale distribution business or construction project?
Contact DEGOL Hardware for product specifications, technical drawings, available finishes, sample information, OEM/ODM customization and wholesale pricing.
Product Model: LH1011
Product Name: Stainless Steel Straight Rectangular Door Lever Handle on Square Rose for Modern Interior and Hotel Doors
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
WhatsApp Link: https://wa.me/8613725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Whether you are an architectural hardware wholesaler, importer, building material distributor or construction project buyer, DEGOL welcomes your product sourcing inquiries.
For faster quotation processing, please provide your required quantity, preferred material grade, surface finish, lock compatibility requirements, packaging requirements and destination country.
Request Your LH1011 Rectangular Stainless Steel Door Lever Handle on Square Rose Wholesale Quote Today.