DP1002
Degol
| Availability: | |
|---|---|
| Quantity: | |
The DEGOL DP1002 Glass Door Pull Flat Handle is a modern architectural door hardware product designed for convenient manual opening and closing of compatible glass and wooden doors.
Featuring a clean flat bar handle design, this door pull provides a contemporary architectural appearance that complements frameless glass doors, commercial entrances, office partitions and modern interior spaces.
The stainless steel construction makes the DP1002 a practical option for architectural hardware buyers seeking metallic door pull handles for residential, commercial and hospitality projects.
Depending on the selected fixing system, flat pull handles can be configured for single-sided or back-to-back installation, allowing users to operate the door from the appropriate side.
The minimalist profile makes this type of handle suitable for modern buildings where door hardware should coordinate with glass, timber, metal and other interior finishes.
DEGOL Hardware supplies architectural door hardware to wholesale distributors, building material suppliers, construction contractors, glass door installers and international project buyers.
For bulk purchasing, DEGOL can be contacted regarding handle dimensions, mounting arrangements, available surface finishes, sample information and OEM / ODM requirements.
A flat glass door pull handle is a manually operated door accessory with a flat or rectangular gripping profile. It is attached to a door through a suitable fixing system and allows the user to pull the door open or closed.
Unlike a lever handle lock, a pull handle does not normally contain a latch or key-operated locking mechanism.
For glass door installations, the handle may be fitted through prepared mounting holes using suitable bolts, sleeves, gaskets and protective accessories designed for the glass specification.
A back-to-back pull handle arrangement normally consists of handles installed on opposite sides of the same door, connected through an appropriate fixing assembly.
Main Functions:
Provides a comfortable gripping surface for manual door operation.
Supports pull-type operation on compatible swing doors.
Offers a modern architectural appearance.
Can be used with compatible glass door locking and closing hardware.
Provides an alternative to tubular door pull designs.
Supports residential, commercial and architectural interior projects.
Specification |
Details |
|---|---|
Product Model |
DP1002 |
Product Name |
Glass Door Pull Flat Handle |
Brand |
DEGOL Hardware |
Product Category |
Architectural Glass Door Pull |
Handle Shape |
Flat Bar Design, per requested configuration |
Main Material |
Stainless Steel |
Material Grade |
Subject to confirmation |
Handle Construction |
According to selected model |
Surface Finish |
Satin / Polished, subject to availability |
Installation Method |
Mechanical Fixing |
Mounting Configuration |
Single-Sided / Back-to-Back upon confirmation |
Lock Function |
Without Lock |
Handle Overall Length |
According to selected specification |
Handle Width |
Technical drawing required |
Handle Thickness |
Technical drawing required |
Door Thickness |
Depends on fixing hardware |
Suitable Door Material |
Glass / Wood / Compatible Metal Doors |
Installation Accessories |
According to supplied configuration |
OEM / ODM |
Available upon consultation |
Sample Availability |
Upon request |
MOQ |
Contact DEGOL |
Country of Origin |
China |
DEGOL's Flat Pull product listing identifies stainless steel construction, satin and polished finish options, OEM service and a wholesale MOQ reference of 500 pairs for that listing. These terms should be reconfirmed for the exact DP1002 flat version.
The DP1002 Flat Glass Door Pull Handle is intended for installation using appropriate door mounting hardware.
For glass door applications, dimensional accuracy is especially important because mounting holes must be coordinated with the glass panel manufacturing process.
Technical Parameter |
Specification |
|---|---|
Fixing Bolt Diameter |
According to mounting system |
Glass Hole Diameter |
Technical drawing required |
Suitable Glass Thickness |
According to selected fixing set |
Door Thickness Compatibility |
Subject to mounting hardware |
Fixing Type |
Single-Sided / Back-to-Back |
Manufacturing Tolerance |
Factory confirmation required |
Technical Drawing Reference
Flat Pull Handle – Dimensional Reference
Illustrative dimensional diagram only, not to scale or an official DP1002 technical drawing. L = overall length; C/C = hole center distance; W = bar width.Important Technical Notes:
Confirm the hole center distance before preparing glass panels.
Do not drill or modify tempered glass after tempering.
Use suitable protective gaskets and fixing components.
Verify the mounting method and compatible glass thickness.
Confirm handle projection and door clearance before installation.
For architectural projects, request the official dimensional drawing from DEGOL before glass fabrication or bulk purchasing.
The DP1002 is associated with DEGOL's stainless steel door pull range.
Stainless steel offers a clean metallic appearance and is commonly used in architectural door hardware because of its mechanical properties and suitability for various interior environments.
The actual corrosion resistance, surface durability and environmental suitability depend on the stainless steel grade, manufacturing process and selected surface finish.
Material / Finish |
Description |
|---|---|
Handle Body |
Stainless Steel |
Stainless Steel Grade |
Confirm 201 / 304 / other options |
Fixing Hardware |
According to product configuration |
Satin Stainless Steel (SSS) |
Subtle brushed metallic appearance |
Polished Stainless Steel (PSS) |
Reflective metallic appearance |
Matte Black |
OEM finish inquiry |
PVD Finish |
Customized finish inquiry |
Other Finishes |
Subject to production feasibility |
Surface Finish Advantages:
Satin stainless steel creates a contemporary brushed appearance that complements glass doors and minimalist interiors.
Polished stainless steel offers a brighter decorative effect and can coordinate with chrome or polished architectural fittings.
For larger architectural projects, buyers can request finish samples to confirm visual consistency with other door hardware.
The DP1002 Glass Door Pull Flat Handle is intended for compatible glass and architectural door installations.
Typical Applications:
Frameless glass entrance doors.
Commercial office entrance doors.
Interior glass partition doors.
Retail store entrances.
Shopping mall interior doors.
Hotel and hospitality entrances.
Showroom glass doors.
Restaurant entrance doors.
Residential glass swing doors.
Wooden doors in modern interiors.
Architectural renovation projects.
Commercial building door hardware procurement.
The product can be combined with suitable glass patch fittings, door closers, hinges and locking devices, subject to the door system's technical requirements.
Door Type |
Application Suitability |
|---|---|
Frameless Glass Doors |
Suitable with compatible glass and fixings |
Tempered Glass Doors |
Suitable where holes are prepared before tempering |
Commercial Glass Entrance Doors |
Subject to door weight and system requirements |
Glass Office Partition Doors |
Suitable with compatible swing door design |
Wooden Doors |
Suitable with appropriate fixings |
Metal Doors |
Requires compatible mounting hardware |
Aluminum Frame Glass Doors |
Depends on frame design |
Hotel Glass Doors |
Subject to project specifications |
Shopfront Doors |
Suitable for compatible entrance systems |
Sliding Glass Doors |
Only where handle projection and track clearance permit |
Fire-Rated Doors |
Requires approval as part of the rated door assembly |
Step 1 – Confirm Door and Handle Specifications
Measure the door thickness, review the handle fixing arrangement and verify the required mounting hole center distance.
For glass doors, confirm the holes and their positions before the glass is manufactured or tempered.
Step 2 – Prepare the Installation Area
Clean the mounting area and check that the glass or door panel is free from damage.
Ensure that the correct mounting accessories are available.
Step 3 – Position the Protective Components
Install suitable gaskets, sleeves or protective washers according to the fixing system.
Metal mounting hardware should not make unprotected direct contact with the glass.
Step 4 – Position the Pull Handle
Align the handle with the prepared holes.
For a back-to-back configuration, position the corresponding handles on both sides of the door.
Step 5 – Secure the Fixing Hardware
Install the specified bolts and fasteners according to the manufacturer's instructions.
Tighten evenly using the approved tightening procedure and avoid excessive pressure on the glass.
Step 6 – Check Handle Alignment
Verify that the handle is firmly attached, visually aligned and free from unwanted movement.
Step 7 – Test Door Operation
Open and close the door several times to verify comfortable operation and adequate clearance from the frame, adjacent glass panels and other hardware.
Installation Recommendation: Glass door handles should be installed according to the approved glass door hardware specifications. Professional glass hardware installation is recommended, especially for commercial entrances and large glass panels.
1. Modern Flat Bar Design
The flat handle profile creates a clean, minimalist appearance suited to contemporary glass door architecture.
2. Stainless Steel Construction
The stainless steel material provides a metallic appearance and practical structural properties for compatible door hardware applications.
3. Suitable for Glass Door Projects
The handle design can be integrated into compatible glass door systems using appropriate mounting hardware.
4. Single-Sided or Back-to-Back Installation Options
Depending on the final product configuration, buyers can discuss suitable fixing arrangements for different applications.
5. Satin and Polished Finish Options
Different metallic appearances can be selected to coordinate with glass door hinges, patch fittings and other architectural accessories.
6. Comfortable Manual Door Operation
The pull handle provides a defined gripping surface for opening and closing compatible doors.
7. Architectural Application Flexibility
The handle style can be used in offices, hotels, retail environments, showrooms and residential interiors.
8. OEM / ODM Wholesale Support
DEGOL supports customization inquiries for handle dimensions, finishes, branding and packaging.
DEGOL Hardware supports OEM / ODM inquiries for architectural pull handles and glass door hardware products.
The DP1002 can be discussed as part of a wholesale or project-specific door pull supply program.
Customization Service |
Available Options |
|---|---|
Custom Handle Length |
According to technical feasibility |
Custom Hole Center Distance |
Subject to production confirmation |
Flat Bar Width |
Custom specification inquiry |
Stainless Steel Grade |
Available material options upon request |
Surface Finish |
Satin / Polished / Customized |
Mounting Configuration |
Single-Sided / Back-to-Back inquiry |
Customer Logo |
Private label or logo marking |
Packaging |
Customized branded packaging |
Product Labeling |
SKU and barcode labels |
Project Drawings |
Review of customer specifications |
Sample Development |
Available upon discussion |
Wholesale Supply |
Distributor and project orders |
OEM / ODM feasibility, minimum order quantities and development costs depend on the requested configuration and manufacturing requirements.
Order Information |
Details |
|---|---|
Product Model |
DP1002 |
Product Name |
Glass Door Pull Flat Handle |
Brand |
DEGOL |
Product Material |
Stainless Steel |
Standard Packaging |
Protective Poly Bag + White Box + Export Carton |
Pallet Packaging |
According to shipping arrangement |
Customized Packaging |
Available upon request |
MOQ Reference |
500 pairs for listed DEGOL flat pull product |
Sample Orders |
Contact DEGOL |
Wholesale Orders |
Supported |
Reference Lead Time |
Approximately 25–35 days |
Payment Terms |
According to quotation |
Shipping Terms |
To be confirmed |
Shipping Method |
Sea Freight / Air Freight |
OEM Branding |
Available upon consultation |
Country of Origin |
China |
The MOQ, standard packaging and delivery reference above come from DEGOL's public flat pull handle listing and are not independently confirmed as terms for the DP1002 flat variant.
Jiangmen Degol Hardware Co., Ltd. is a China-based architectural hardware supplier providing door handles, door locks, hinges and glass door accessories for wholesale and international project purchasing.
DEGOL's supplier profile identifies the business as established in December 2012, with manufacturing and trading operations in Jiangmen, Guangdong.
The company offers a range of glass door handles, stainless steel door pull handles and related architectural hardware products.
Factory & Supply Capabilities:
Stainless steel architectural door handle sourcing.
Flat and tubular glass door pull handle product ranges.
Door hardware manufacturing and supply coordination.
OEM / ODM development inquiries.
Customized size and finish requests.
Back-to-back pull handle sourcing.
Wholesale and bulk project order support.
Protective packaging and customized labeling.
Product sampling and technical drawing inquiries.
Quality requirements subject to agreed specifications.
Export order and international shipping coordination.
DEGOL can be contacted for detailed information about product-specific production arrangements, current manufacturing capacity, inspection requirements and delivery schedules.
Q1: What is the DP1002 Glass Door Pull Flat Handle?
A: The DP1002 is identified as a DEGOL door pull handle model. This product page describes the requested flat-style configuration for compatible architectural glass and wooden doors.
Q2: What material is used for the DP1002?
A: DEGOL's public DP1002 listings identify stainless steel as the main material. The exact grade for the flat version should be confirmed before ordering.
Q3: Can DP1002 be installed on glass doors?
A: Yes, the flat pull handle can be considered for glass door applications when the handle and mounting hardware are compatible with the glass specification.
Q4: Is DP1002 suitable for tempered glass?
A: It may be suitable for tempered glass with correctly prepared mounting holes. All drilling and edge preparation must be completed before tempering.
Q5: Can the handle be installed back-to-back?
A: DEGOL offers back-to-back flat pull handles. Confirm the DP1002's available fixing arrangements and included components with the sales team.
Q6: What surface finishes are available?
A: Satin and polished stainless steel finishes are listed for DEGOL's flat pull range. Buyers can inquire about availability for DP1002 and additional custom options.
Q7: What sizes are available for DP1002?
A: The exact dimensions of the DP1002 flat configuration require confirmation. Contact DEGOL for available lengths and mounting center distances.
Q8: Is the DP1002 a locking door handle?
A: The door pull handle itself is not a locking device. It can be installed alongside an independently compatible door locking system.
Q9: Can DP1002 be installed on wooden doors?
A: Yes, wooden door applications are possible with suitable mounting hardware and an approved fixing arrangement.
Q10: Is DP1002 suitable for commercial entrance doors?
A: It can be considered for compatible commercial entrance systems, subject to door specifications, mounting strength and local building requirements.
Q11: Does DEGOL provide customized handle lengths?
A: Customers can discuss customized lengths and mounting dimensions with DEGOL, subject to production feasibility and MOQ.
Q12: Can I customize the surface finish?
A: DEGOL accepts OEM / ODM inquiries, including selected finishes and decorative treatments.
Q13: Can DEGOL provide product samples?
A: Buyers can request sample information, sample charges and shipping arrangements from DEGOL's sales team.
Q14: What is the MOQ for DP1002?
A: A related DEGOL flat pull listing gives 500 pairs as an MOQ reference. Confirm the minimum order quantity for the exact DP1002 configuration.
Q15: How long does bulk production take?
A: DEGOL's related flat pull listing indicates a usual lead time of approximately 25–35 days. Actual production time depends on order quantity and product specifications.
Q16: Can I order DP1002 with my own brand?
A: OEM branding, private labeling and custom packaging can be discussed with DEGOL for qualifying wholesale orders.
Q17: How do I request a DP1002 wholesale quotation?
A: Contact DEGOL Hardware through WhatsApp or email with your required size, finish, quantity, mounting configuration and delivery destination.
Looking for a stainless steel flat glass door pull handle for your architectural door hardware range?
Contact DEGOL Hardware for product specifications, technical drawings, available sizes, surface finishes, sample information and wholesale pricing.
Product Model: DP1002
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: degolhardware.com
Email: info@degolhardware.com
Request Your DP1002 Glass Door Pull Flat Handle Wholesale Quote Today.