 |
DPL1002
Degol
| Quantity: | |
|---|---|
The DPL1002 Fire-Rated Touch Bar Exit Device is a commercial door hardware product designed to facilitate emergency egress through compatible exit doors.
Commonly known as a panic bar or touch bar exit device, this type of hardware allows occupants to operate the door by applying pressure to a horizontal bar, providing a practical exit solution for buildings where safe and efficient evacuation is important.
For commercial buildings and public facilities, exit hardware must be selected according to the intended application, door configuration, occupancy requirements and applicable building and fire safety regulations.
The DPL1002 is positioned for buyers sourcing touch bar exit hardware for commercial door systems, emergency exits and potential fire-rated door applications.
When correctly specified and installed as part of a compatible door assembly, suitable exit hardware can support convenient emergency door operation while maintaining the required locking and closing functions.
For international architectural hardware distributors, door manufacturers, construction contractors and project procurement teams, Jiangmen Degol Hardware Co., Ltd. welcomes enquiries regarding technical specifications, product configurations, certification documentation, available finishes, samples and wholesale pricing.
Certification notice: The product name identifies DPL1002 as a fire-rated touch bar exit device, but the exact certification status has not been independently established from the available information. Buyers should verify the applicable certificate, test report and approved door assembly before specifying the product for regulated fire-door applications.
A touch bar exit device is a door-mounted mechanism designed to release the door's locking points when the horizontal operating bar is pressed.
It is commonly used on designated exit doors in commercial buildings, public facilities and other locations requiring convenient egress.
A fire-rated exit device is an exit device specifically approved for use in defined fire-door applications. Its suitability depends on the device's certification, the door and frame assembly, the installation method and any applicable hardware restrictions.
Horizontal push-bar operation
Designed to facilitate emergency door release
Suitable for compatible commercial exit doors
Available in different hardware configurations, depending on the product
May be supplied with compatible outside access hardware
Intended for integration with an approved door and locking arrangement
Potential application in fire-rated door assemblies, subject to verification
A user presses the touch bar from the egress side.
The operating mechanism actuates the specified latch or locking points.
The door can be opened according to the approved hardware configuration.
The mechanism returns to its resting position after operation, where supported by the design.
The actual latch arrangement, number of locking points, outside access function and operating characteristics must be confirmed against the official DPL1002 specification.
| Specification Item | Details |
|---|---|
| Model Number | DPL1002 |
| Product Name | Fire-Rated Touch Bar Exit Device |
| Product Type | Panic / Touch Bar Exit Hardware |
| Operating Method | Push-Bar Operation |
| Primary Function | Emergency Egress |
| Fire-Rated Use | Subject to Applicable Certification |
| Installation Method | According to Approved Instructions |
| Applications | Commercial Exit Doors and Approved Emergency Exit Assemblies |
| OEM / ODM | Subject to Feasibility |
| MOQ | To Be Confirmed |
| Dimension Unit | mm |
Specification notice: Final product dimensions, materials, performance ratings and certification details must be obtained from the official DPL1002 product drawing and supporting technical documents.
An approved technical drawing is required to confirm the dimensions and installation requirements of the DPL1002 Fire-Rated Touch Bar Exit Device.
The previously supplied image illustrates an automatic flush bolt, which is a different door hardware product. Its dimensions and mounting details should not be used to design or install a touch bar exit device.
Before installation or bulk production, buyers should obtain:
An overall product dimension drawing
A mounting-hole layout
A door preparation template
A latch and locking mechanism drawing
The specified fastener dimensions
An installation and adjustment manual
The approved door and frame compatibility information
Relevant fire-rating and certification documentation, where applicable
All production dimensions should be stated in millimeters.
Do not use dimensions from unrelated products.
Mounting-hole positions must match the approved template.
Door thickness and width compatibility must be verified.
Fire-rated installations must follow the applicable listing and installation requirements.
Any customized dimensions must be reviewed for technical and certification implications.
The actual materials and surface finishes used for DPL1002 have not been confirmed.
Commercial touch bar exit devices can incorporate metal housings, operating bars, latch components, springs and other mechanical parts. The exact material selection depends on the product design and intended application.
| Component / Feature | Description |
|---|---|
| Alternative Finishes | Subject to Product Availability |
| Corrosion Resistance | To Be Confirmed |
| Cleaning Requirements | According to Manufacturer Instructions |
For commercial door hardware, material selection should consider operating frequency, mechanical strength, corrosion exposure and compatibility with the door assembly.
Buyers may enquire about stainless steel appearance, satin finishes, metallic finishes or other available options. Actual finishes must be confirmed for the DPL1002 model.
For projects involving fire-rated doors or high-traffic public buildings, request the official material specification and product documentation.
Decorative finish selection must not compromise the product's approved configuration or certification requirements.
The DPL1002 Fire-Rated Touch Bar Exit Device can be evaluated for compatible commercial exit-door applications, subject to the product's verified specifications and approvals.
Potential applications include designated exit doors in offices and commercial premises where approved touch bar exit hardware is required.
Exit devices may be specified for suitable public facilities according to occupancy, accessibility and egress requirements.
The device can be considered for compatible office exit doors and circulation areas.
Suitable applications may include designated exits in shops and commercial retail buildings.
Potential use in schools and other educational facilities depends on the applicable egress requirements and approved door assembly.
The product may be evaluated for designated exit doors in hotels and other hospitality properties.
Suitable applications depend on door construction, environmental conditions and the relevant safety requirements.
The DPL1002 may be specified for a fire-rated door application only when its certification and compatibility with the complete door assembly have been confirmed.
Important: A fire-rated door requires a compatible and approved complete assembly. The exit device alone does not establish the fire rating of the door, frame or installation.
| Door Type | Suitability Considerations |
|---|---|
| Commercial Exit Doors | Confirm egress requirements and approved hardware configuration |
| Fire-Rated Doors | Verify certification for the exact device and door assembly |
| Metal Doors | Confirm mounting geometry and fastener compatibility |
| Timber Doors | Verify door construction and applicable fire-door approval |
| Office Exit Doors | Check occupancy and local code requirements |
| Retail Exit Doors | Confirm egress and access-control requirements |
| Educational Facility Doors | Verify applicable safety and building regulations |
| Hospitality Exit Doors | Confirm the approved door configuration |
| Industrial Facility Doors | Check door construction and operating conditions |
Before selecting DPL1002, confirm:
Door material and construction
Door thickness
Door width and height
Door handing
Required locking-point configuration
Outside access requirements
Required fire rating of the door assembly
Applicable egress and accessibility regulations
Certification requirements for the target market
Installation instructions and approved fixing method
The actual compatible door dimensions and hardware configuration must be confirmed with DEGOL before ordering.
The following is a general installation overview. The actual DPL1002 must be installed according to its approved technical drawing, installation instructions and applicable local regulations.
Step 1: Verify the Product Configuration
Confirm the model number, locking arrangement, handing, door compatibility and intended application.
Step 2: Check the Door Assembly
Inspect the door, frame and existing hardware. For a fire-rated installation, verify that the door assembly permits the selected exit device.
Step 3: Review the Installation Template
Use the official DPL1002 template to establish the device position, mounting holes and latch preparation.
Do not use a template from an automatic flush bolt or another unrelated product.
Step 4: Mark the Mounting Positions
Mark all fixing points and required openings according to the approved drawing.
Step 5: Prepare the Door
Prepare the door and mounting points using the specified tools and dimensions. Avoid unauthorized modifications to fire-rated door components.
Step 6: Mount the Exit Device
Position and secure the device using the specified fasteners and installation sequence.
Step 7: Install Compatible Locking Components
Fit the latch, strikes, rods or other specified components according to the actual product configuration.
Step 8: Install Outside Trim if Required
If outside access hardware is included, install it according to the approved instructions.
Step 9: Test the Egress Function
Operate the touch bar and verify that the door releases as intended. Check that the mechanism resets correctly and that the door operates without binding.
Step 10: Complete the Final Inspection
Verify the fasteners, latch engagement, door closing, locking operation and compatibility with the approved assembly.
Fire-rated exit hardware must be installed in accordance with the applicable certification, approved door assembly and local regulations.
Do not modify the product, door or frame in ways that invalidate the applicable approval. Where required, installation and inspection should be carried out by qualified personnel.
The horizontal touch bar provides a direct operating interface for releasing a compatible exit door.
The exit-device design is intended to support door release from the egress side when correctly configured and installed.
The product is positioned for commercial buildings, public facilities and other compatible exit-door installations.
Depending on the model configuration, exit hardware can be integrated with compatible latches and optional outside access components.
Different exit-device configurations may accommodate different door materials, widths and locking arrangements. The DPL1002 compatibility range must be confirmed.
The product may be considered for fire-rated door assemblies when supported by the required certification and installation documentation.
The product category is relevant to architectural hardware distributors, door manufacturers, contractors and commercial project buyers.
Buyers can request approved drawings, installation instructions and relevant certification information before specifying the product.
DEGOL welcomes enquiries about available product configurations, finishes, packaging and customization feasibility.
The product is suitable for evaluation by distributors and project buyers seeking commercial exit hardware.
Jiangmen Degol Hardware Co., Ltd. welcomes OEM and ODM enquiries for the DPL1002 Fire-Rated Touch Bar Exit Device and related architectural door hardware.
Product Configuration
Buyers can submit their required exit-device configuration for technical review.
Dimensions
Required device length, mounting dimensions and door compatibility can be reviewed against manufacturing feasibility.
Material and Finish
Available materials and surface finishes can be confirmed for the selected model.
Outside Access Hardware
Where supported, buyers may enquire about compatible exterior trim or access components.
Branding and Private Label
Product identification and private-label requirements can be discussed.
Customized Packaging
Retail boxes, product labels, export cartons and project-specific packaging can be evaluated.
Technical Drawing Review
Customers may submit door drawings, mounting requirements and project specifications for compatibility assessment.
Certification Documentation
Buyers can request available certification documents for the exact model and configuration. Any proposed modification that may affect certification must be reviewed before production.
Sample Evaluation
Sample availability can be confirmed for buyers wishing to inspect fit, operation and finish before placing a bulk order.
All customization options, certification implications, tooling requirements, MOQ and lead times are subject to technical feasibility and commercial confirmation.
| Order Item | Details |
|---|---|
| Product Model | DPL1002 |
| Product Name | Fire-Rated Touch Bar Exit Device |
| Product Category | Commercial Exit Hardware |
| Brand | DEGOL |
| Sales Type | Wholesale / Project Procurement |
| Sample Availability | Contact DEGOL |
| MOQ | To Be Confirmed |
| Wholesale Price | Based on Confirmed Configuration and Quantity |
| Standard Packaging | To Be Confirmed |
| Customized Packaging | Subject to Order Requirements |
| Private Label | Enquiries Welcome |
| Material Specification | To Be Confirmed |
| Surface Finish | To Be Confirmed |
| Compatible Door Range | To Be Confirmed |
| Certification Documents | Availability to Be Confirmed |
| Production Lead Time | To Be Confirmed |
| Shipping Method | Subject to Destination and Agreement |
| Payment Terms | Confirmed During Quotation |
| Inspection Requirements | Subject to Order Specifications |
Contact DEGOL with model number DPL1002.
Specify the intended application and destination market.
Confirm door type, thickness and dimensions.
Identify the required locking configuration and outside access requirements.
Request the official technical drawing and installation instructions.
Verify the applicable certification and door assembly compatibility.
Confirm material, finish, MOQ and sample availability.
Request a wholesale quotation and delivery schedule.
Approve the final specifications and documentation before production.
Jiangmen Degol Hardware Co., Ltd. serves the architectural door hardware market and welcomes enquiries from international hardware distributors, door manufacturers, contractors and project procurement teams.
For the DPL1002 Fire-Rated Touch Bar Exit Device, DEGOL can be contacted regarding product specifications, technical drawings, available configurations, sample requests and wholesale purchasing requirements.
Product Specification Enquiries
Buyers may request the verified dimensions, material information and compatible door configurations.
Technical Drawing Support
Available drawings and mounting details can be requested for product evaluation and installation planning.
Certification Documentation
Customers should request the applicable certificate, test report, listing information and installation requirements for the exact model.
Material and Finish Information
Available material options and surface finishes can be confirmed with the company.
Sample Requests
Sample availability, cost and delivery arrangements can be discussed before bulk purchasing.
OEM / ODM Projects
Customization requests involving configuration, finish, branding and packaging may be reviewed.
Wholesale Quotations
Commercial quotations can be requested according to the final specifications and order quantity.
Export Order Coordination
Packaging, shipping requirements and commercial documentation can be discussed with DEGOL.
Specific factory capacity, production equipment, quality certifications and certification status for DPL1002 should be confirmed directly with the company.
Company: Jiangmen Degol Hardware Co., Ltd.
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
WhatsApp: +86 13725946499
Q1: What is the DPL1002 Fire-Rated Touch Bar Exit Device?
DPL1002 is the product model provided for a touch bar exit device intended for commercial emergency-exit hardware applications.
Q2: What is a touch bar exit device?
A touch bar exit device uses a horizontal operating bar to release the specified locking mechanism when pressed from the egress side.
Q3: Is DPL1002 certified for fire-rated doors?
The product title identifies it as certified, but the exact certification has not been verified from the available information. Request the certificate and confirm that it covers the exact model and installation configuration.
Q4: Which international standards does DPL1002 meet?
The applicable standards have not been confirmed. Depending on the target market and product type, relevant references may include UL 305, ANSI/BHMA A156.3, or EN 1125. These standards are not interchangeable, and no compliance claim should be made without supporting documentation.
Q5: Can DPL1002 be installed on a fire-rated door?
Only if the device is approved for the intended fire-door application and is compatible with the complete door assembly and installation requirements.
Q6: What are the dimensions of DPL1002?
The verified dimensions have not been provided. Request the official product drawing and mounting template from DEGOL.
Q7: What materials are used in DPL1002?
The exact materials have not been confirmed. Contact DEGOL for the material specification of the touch bar, housing and locking components.
Q8: Is outside access hardware available?
Outside trim or access hardware may be available depending on the product configuration. Confirm compatibility and availability before ordering.
Q9: Is DPL1002 suitable for metal doors?
Suitability depends on the device configuration, door construction, dimensions and applicable certification. Confirm the approved door types with DEGOL.
Q10: Can DPL1002 be used on timber fire doors?
This must be verified against the product approval and the specific timber fire-door assembly. Do not assume compatibility based on the product category alone.
Q11: Can the product be customized?
Buyers may enquire about available configurations, finishes, packaging and other customization options. Changes affecting certified performance require specific technical review.
Q12: Can DEGOL provide certification documents?
Contact DEGOL to request available certificates, test reports, listing information and installation documentation for DPL1002.
Q13: Can I request a sample before ordering?
Contact DEGOL to confirm sample availability, cost and shipping arrangements.
Q14: What is the MOQ?
The minimum order quantity must be confirmed directly with DEGOL according to the product configuration and order requirements.
Q15: Does DEGOL accept OEM / ODM orders?
DEGOL welcomes OEM / ODM enquiries, subject to manufacturing feasibility and any applicable certification restrictions.
Q16: How can I obtain wholesale pricing?
Send DEGOL the model number DPL1002, required quantity, destination country, intended application and any certification requirements through WhatsApp or email.
Looking for a fire-rated touch bar exit device for your architectural door hardware range? Contact DEGOL Hardware for product specifications, technical drawings, available finishes, certification documentation, sample information and wholesale pricing.
Product Model: DPL1002
Product Name: DPL1002 Certified Fire-Rated Touch Bar Exit Device
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your DPL1002 Fire-Rated Touch Bar Exit Device Wholesale Quote Today.
Contact DEGOL on WhatsApp – Request DPL1002 Wholesale Pricing
