GC1007 Stainless Steel Shower Glass Patch Fitting Wall Mounted Glass Panel Holder

Product Introduction

The DEGOL GC1007 Stainless Steel Shower Glass Patch Fitting Wall Mounted Glass Panel Holder is an architectural bathroom hardware fitting designed for securing compatible fixed glass panels in shower enclosures and frameless glass partition installations.

As part of DEGOL's shower glass clamp product range, the GC1007 is intended to provide a practical connection between a fixed glass panel and a suitable supporting wall structure.

Its wall-mounted configuration makes it a relevant hardware option for modern bathrooms, walk-in shower screens, hotel shower enclosures, residential bathroom renovations and commercial washroom projects.

The stainless steel product category offers a clean architectural appearance that can coordinate with other shower room fittings, including glass door hinges, shower door handles and bathroom accessories.

For international importers, shower enclosure manufacturers, glass hardware wholesalers and construction project buyers, DEGOL provides product sourcing support, customization inquiries, samples and wholesale purchasing information.

Customers can contact DEGOL to verify the GC1007 stainless steel grade, actual glass thickness range, installation dimensions, available surface finishes and compatible mounting accessories.

Product Definition

What Is a Wall Mounted Shower Glass Patch Fitting?

A wall mounted shower glass patch fitting, also known as a wall-to-glass clamp or fixed glass panel holder, is a hardware component used to connect the edge or prepared fixing area of a glass panel to a supporting wall.

This type of fitting is commonly used in frameless shower enclosure systems where a fixed glass panel requires mechanical positioning and support without a continuous full-length frame.

How Does a Shower Glass Clamp Work?

A typical wall-to-glass clamp consists of a metal body, a glass-contacting section and a wall fixing arrangement.

The glass panel is positioned inside or against the designated clamping section. Suitable protective components may be fitted between the glass and metal surfaces to reduce direct contact.

The clamp body is then secured to the supporting wall through the specified mounting arrangement.

The complete installation must be designed to account for glass size, glass weight, wall construction, panel loading and any additional support requirements.

Is a Glass Clamp the Same as a Glass Door Hinge?

No. A fixed glass clamp is primarily used to hold or position a stationary glass panel. A shower door hinge is designed to support and allow movement of a hinged glass door.

Although both products belong to the shower glass hardware category, they are not interchangeable.

The GC1007 should be selected according to its confirmed function and technical configuration.

Product Specification

Technical Drawing & Dimensions

Accurate technical dimensions are essential for selecting suitable shower glass clamps and ensuring proper coordination between the glass panel, wall and fixing hardware.

The GC1007 installation arrangement should be verified using the current manufacturer-approved product drawing.

Key Dimensional Parameters

Technical Documentation for Wholesale Buyers

DEGOL can be contacted to request:

• GC1007 front-view and side-view dimensional drawings

• Wall fixing position details

• Glass thickness compatibility

• Glass preparation requirements

• Glass drilling or notching instructions, if required

• Mounting fastener specifications

• Protective gasket information

• Installation recommendations

• Applicable load and performance information

Important Installation Requirement

Never drill, cut or modify tempered glass after tempering. If the fitting requires holes or notches, these must be specified during glass fabrication before the tempering process.

The installation drawing should be confirmed before manufacturing glass panels or preparing wall mounting points.

Material & Surface Finish

The material and surface finish of shower glass hardware influence appearance, maintenance requirements and resistance to moisture exposure.

DEGOL identifies GC1007 as a stainless steel glass clamp product. However, the exact grade of stainless steel is not specified in the verified category listing.

Potential Finish Requirements

Buyers may inquire about finishes such as satin stainless steel, polished stainless steel, brushed metal appearance or matte black, subject to the GC1007 production options.

Bathroom Environment Considerations

Shower hardware is exposed to moisture, cleaning chemicals and repeated wet-dry cycles.

For long-term suitability, material selection should account for the bathroom environment, ventilation, water composition and maintenance practices.

Buyers requiring use in coastal regions, high-humidity environments or areas with aggressive cleaning products should request confirmation of the applicable material grade and corrosion resistance performance.

Applications

The DEGOL GC1007 Wall Mounted Shower Glass Panel Holder can be considered for various bathroom and glass partition projects.

1. Frameless Shower Enclosures

The fitting may be used to connect compatible fixed shower glass panels to a supporting wall, helping maintain a frameless architectural appearance.

2. Walk-In Shower Screens

Wall mounted glass clamps are commonly selected for walk-in shower designs where fixed glass panels create a shower area without a full enclosure frame.

3. Hotel Bathroom Projects

The stainless steel appearance can coordinate with modern hospitality bathroom fittings and glass shower screen designs.

4. Residential Bathroom Renovations

GC1007 can be considered for residential shower partition projects requiring a wall-to-glass connection.

5. Apartment Development Projects

Glass panel fittings may be specified as part of coordinated bathroom hardware procurement in residential construction.

6. Commercial Washroom Installations

Compatible fixed glass panel hardware can support modern washroom and shower partition layouts in commercial properties.

7. Shower Enclosure Manufacturing

Shower screen manufacturers can evaluate GC1007 as a component for compatible fixed-glass enclosure systems.

8. Glass Partition Hardware Supply

The fitting may be considered for selected fixed glass partition applications where the load, glass specification and mounting arrangement are approved.

Suitable Door Types

Because GC1007 is primarily a fixed glass panel holder, this section focuses on compatible glass types and enclosure structures rather than conventional wooden or metal doors.

Glass Selection Notice

The required glass thickness, panel size and number of clamps must be determined from the actual product capacity and shower enclosure design.

Do not assume that a GC1007 fixed glass holder can carry the dynamic load of an opening shower door.

Installation Guide

Step 1 – Confirm the Glass Specification

Verify the glass type, thickness, height, width and weight, along with the GC1007 clamp's actual compatibility.

Step 2 – Check Wall Structure

Make sure the supporting wall is structurally suitable for the required fixings. Confirm whether the wall contains concrete, masonry, reinforced framing or another approved substrate.

Step 3 – Review the Technical Drawing

Use the manufacturer's GC1007 drawing to establish mounting positions and any required glass preparation.

Step 4 – Prepare Glass Panels

If glass drilling or notching is required, the preparation must be completed before tempering by a qualified glass fabricator.

Step 5 – Mark Wall Fixing Locations

Position the glass panel and mark the installation points according to the approved layout.

Step 6 – Install the Wall Fixing Components

Fit suitable anchors and fasteners into the structural wall, following the specified tightening and fixing procedures.

Step 7 – Position the Glass Panel

Carefully place the glass panel with the required protective pads, gaskets or spacers.

Step 8 – Secure the Glass Clamp

Install the clamp body and fasten the glass-retaining components according to the manufacturer's recommendations.

Step 9 – Check Alignment

Verify that the glass panel is properly positioned, supported and clear of unintended hard contact with other building surfaces.

Step 10 – Complete Sealing and Inspection

Apply suitable bathroom-grade sealant where required by the enclosure design. Inspect alignment, fixing security, glass clearance and the overall shower screen installation.

Installation Safety Notice: Glass clamps should not be used beyond their verified load capacity. Additional stabilizing bars, channels or structural supports may be necessary depending on the size and configuration of the glass panel.

Product Advantages

1. Stainless Steel Construction

The GC1007 belongs to DEGOL's stainless steel shower glass clamp range, offering a metal hardware solution for bathroom glass installations.

2. Wall-to-Glass Mounting Design

The product is intended to connect compatible fixed glass panels to a supporting wall structure.

3. Suitable for Frameless Shower Designs

Compact glass fittings can help create the clean appearance associated with modern frameless shower enclosures.

4. Coordinated Bathroom Hardware Appearance

Stainless steel glass fittings may be combined visually with suitable shower hinges, handles and other matching bathroom hardware.

5. Fixed Glass Panel Support

When correctly specified and installed, a suitable glass clamp helps position and retain a stationary panel as part of a complete enclosure system.

6. Residential and Commercial Applications

The product category is relevant to residential bathrooms, hospitality projects and commercial shower enclosure installations.

7. Architectural Project Sourcing

GC1007 may be evaluated by glass contractors, bathroom hardware suppliers and shower enclosure manufacturers for project procurement.

8. Wholesale Supply Opportunities

DEGOL provides an inquiry channel for bulk order pricing, product specifications and sample requests.

9. OEM / ODM Customization

Customers can submit branding, packaging, finish and product configuration inquiries, subject to manufacturing feasibility.

OEM / ODM Service

DEGOL Hardware welcomes OEM and ODM inquiries from shower enclosure manufacturers, glass hardware distributors, bathroom accessories brands and construction procurement companies.

Customization requirements for GC1007 may be reviewed according to product design, material availability and order quantity.

OEM / ODM Ordering Requirements

Customers should provide the target glass thickness, required material grade, surface finish, expected quantity, destination market and any project-specific installation or packaging requirements.

Packaging & Order Information

Wholesale Order Recommendations

Please provide the GC1007 model number, expected purchase quantity, glass thickness, required material grade, preferred finish, destination country and packaging requirements.

For shower enclosure manufacturing projects, buyers should also confirm glass preparation details and the supported panel size.

Factory Capability

Jiangmen Degol Hardware Co., Ltd. – Bathroom Glass Hardware Manufacturer & Supplier in China

DEGOL Hardware is a China-based architectural and bathroom hardware supplier offering a broad product portfolio for international distributors, construction contractors and building material buyers.

According to its official website, the company has operated since 2012 and offers door accessories, furniture accessories, bathroom accessories and staircase hardware.

DEGOL lists multiple glass clamp configurations for shower and architectural glass applications, including wall-mounted clamps, angle glass clamps and glass panel holders.

Bathroom Hardware Sourcing

Buyers can inquire about compatible shower glass fittings, handles, hinges and related hardware through DEGOL's product range.

International Wholesale Service

The company supports purchasing inquiries from distributors, glass contractors, bathroom hardware suppliers and other B2B customers.

OEM / ODM Customization

Customers can discuss available finishes, branding, packaging and other product requirements based on manufacturing capabilities.

Technical Product Coordination

DEGOL can be contacted for current GC1007 drawings, confirmed installation details, material information and wholesale pricing.

Factory Contact Information

Company: Jiangmen Degol Hardware Co., Ltd.

Website: degolhardware.com 

WhatsApp: +86 13725946499

Email: info@degolhardware.com

FAQ – GC1007 Stainless Steel Shower Glass Patch Fitting

Q1: What is the DEGOL GC1007 Stainless Steel Shower Glass Patch Fitting?

The GC1007 is a stainless steel shower glass hardware fitting listed in DEGOL's glass clamp category, intended for wall-mounted glass panel applications.

Q2: What is the main function of the GC1007?

Its main intended function is to connect and help position a compatible fixed glass panel relative to a supporting wall structure.

Q3: Is GC1007 suitable for frameless shower enclosures?

It may be suitable for frameless shower screens when the selected glass thickness, panel size and installation arrangement match the confirmed product specifications.

Q4: What material is used for the GC1007 glass clamp?

DEGOL identifies the product as a stainless steel glass clamp. The exact stainless steel grade should be confirmed before ordering.

Q5: Is the GC1007 made from SUS304 stainless steel?

SUS304 has not been verified for this model. Buyers requiring SUS304 should request material confirmation from DEGOL.

Q6: What glass thickness does the GC1007 support?

The precise supported glass thickness range is not currently verified. Please request the GC1007 technical specification and compatibility information.

Q7: Does the GC1007 require drilling holes in the glass?

Glass preparation depends on the exact clamp design. Some glass clamps require drilling or notching, while others use different fixing arrangements. The GC1007 drawing must be checked before glass fabrication.

Q8: Can GC1007 be used on tempered glass panels?

Tempered glass is commonly used in shower enclosures, but the correct glass type, thickness and preparation must meet the product's confirmed requirements.

Q9: Is GC1007 suitable for shower doors?

The GC1007 is described as a wall-mounted glass clamp or panel holder. It should not be used as a moving shower door hinge unless the specific configuration is designed and approved for that purpose.

Q10: What surface finishes are available?

Available finishes require confirmation from DEGOL. Buyers can inquire about satin, polished or other finish requirements.

Q11: Is the GC1007 corrosion resistant?

Stainless steel is commonly used in moisture-exposed environments, but the actual corrosion resistance depends on the alloy grade, finish and exposure conditions. Model-specific performance should be confirmed.

Q12: Does GC1007 include mounting screws and rubber gaskets?

The accessory package has not been verified. Buyers should request the confirmed kit contents before ordering.

Q13: Can the GC1007 support large shower glass panels?

Supported glass panel dimensions and loads must be determined from manufacturer data and the overall enclosure design. Additional structural support may be required.

Q14: Does DEGOL provide OEM / ODM shower glass hardware?

DEGOL accepts customization inquiries covering product specifications, finish options, branding and packaging, subject to technical and commercial confirmation.

Q15: Can I order GC1007 glass clamps in bulk?

Wholesale customers can contact DEGOL to discuss MOQ, samples, product configurations and bulk pricing.

Q16: How do I request a quotation for GC1007?

Contact DEGOL Hardware by WhatsApp, email or the official website. Include the model GC1007, required quantity, glass thickness, material requirements, preferred finish and destination country.

Contact DEGOL – Request a Wholesale Quote