How to install the door stopper?

Step 1:

The first step in installing a door stopper is to determine the installation method and determine whether it should be installed on the wall or on the floor tiles.

Step 2:

The second step is to start searching for the optimal position of the door suction, open the door to its maximum position, and then place the door suction in the corresponding position that will work. Fix the door suction by hand, close the door, and then open the door to see if it can work. If it cannot, slowly move the door suction to find a better position. Repeat this operation to determine the final installation position of the door suction.

Step 3:

After determining the position of the door stopper, we will use a pen to draw the position of the door stopper and also note the position where the door stopper is installed on the door. This way, we can loosen the door stopper. Then, we will use an electric drill to drill holes at the position of the door stopper we have noted. After drilling, we can proceed with the following operations.

Step 4:

Next, we need to fix the door suction to the ground with screws, and then fix a part of the door with screws. However, the fixing here is only slight and cannot be fixed firmly. We should also open the door and check if the door suction is working. If not, we need to make some adjustments. After the position is completely determined, we can start tightening the screws.