 |
SP1016
Degol
| Quantity: | |
|---|---|
The DEGOL SP1016 Stainless Steel Push Pull Door Handle Set with Back Plates is a modern architectural door hardware solution designed for convenient manual door operation and a coordinated commercial door appearance.
The SP1016 features a two-part push and pull configuration. One component consists of a flat, elongated push plate, while the other incorporates a vertical curved pull handle mounted on a matching long back plate.
The rounded-end plate design creates a clean and balanced appearance, making this hardware style suitable for commercial interiors, office buildings, hospitality projects and other architectural applications.
The flat push plate provides a defined contact area for opening a door by pushing, while the curved pull handle offers a dedicated grip for manual pulling operation.
For international building hardware distributors, door manufacturers, contractors and wholesale buyers, DEGOL provides access to architectural hardware product sourcing and OEM / ODM inquiries.
Customers can contact DEGOL Hardware for confirmed SP1016 material specifications, dimensions, available finishes, installation details, samples and wholesale quotations.
What Is a Push Pull Door Handle Set?
A push pull door handle set is a door hardware arrangement that combines a push plate and a pull handle to support convenient manual operation from opposite sides of a door.
A traditional push plate provides a flat area against which a user can apply pressure to open a door, while a pull handle provides a gripping point for opening the door in the opposite direction.
The DEGOL SP1016 is visually configured as a matching push plate and pull handle combination featuring elongated rounded-end backing plates.
How Does the SP1016 Push Pull Handle Work?
On the push side, a user applies pressure to the flat backing plate.
On the pull side, a user grips the raised curved handle and pulls the door open.
This arrangement can provide an intuitive operating experience when installed on a compatible door with the correct opening direction and appropriate door hardware components.
The SP1016 is a manually operated door fitting rather than a complete lockset. Any required door latch, lock, closer or additional security hardware should be specified separately.
Why Choose a Long Back Plate Design?
Long backing plates create a distinctive architectural appearance and provide a defined operating area on the door surface.
They may also help provide a more uniform visual appearance around the mounting area, subject to the size and condition of the door.
Specification | Product Details |
|---|---|
Model | SP1016 |
Brand | DEGOL |
Product Name | Push Pull Handle |
Product Type | Push Plate and Pull Handle Combination |
Hardware Category | Door Pull Hardware / Push Plates |
Design | Long Rounded-End Back Plates |
Handle Style | Vertical Curved Pull Handle |
Push Side | Flat Push Plate |
Pull Side | Raised Pull Handle on Back Plate |
Operation | Manual Push / Pull |
Main Material | To Be Confirmed |
Material Grade | To Be Confirmed |
Visible Color | Silver |
Surface Appearance | Satin / Brushed-Look Metal |
Mounting Fasteners | According to Confirmed Product Configuration |
Fixing Hole Layout | Visible Screw Positions; Dimensions to Confirm |
Handing | Depends on Door Configuration |
Locking Function | No Integrated Lock Shown |
Suitable Door Materials | Wood and Metal, Subject to Installation |
Surface Finishes | Upon Inquiry |
OEM / ODM | Available for Inquiry |
Sample Availability | Contact DEGOL |
MOQ | Confirm with Sales Team |
Country of Origin | China |
Manufacturer / Supplier | Jiangmen Degol Hardware Co., Ltd. |
Accurate product dimensions are essential for selecting the correct SP1016 Push Pull Handle Set and preparing door mounting positions.
The product image indicates elongated backing plates with rounded ends and visible screw positions. One plate is flat and the matching plate includes a projecting curved pull handle.
Before drilling or installation, buyers should confirm the exact technical drawing for the supplied model.
Key Dimensional Parameters
Measurement | Description |
|---|---|
Overall Plate Length (L) | Total length of each backing plate |
Plate Width (W) | Maximum width of the backing plate |
Plate Thickness (T) | Thickness of the flat metal plate |
Handle Grip Length (GL) | Length of the usable pull handle |
Handle Projection (P) | Distance from door surface to the outer grip |
Handle Mounting Distance (HD) | Spacing between handle fixing positions |
Plate Mounting Hole Distance (MH) | Center-to-center distance between fixing holes |
Mounting Hole Diameter (D) | Diameter of screw fixing holes |
Plate End Radius (R) | Radius of the rounded plate ends |
Suitable Door Thickness (DT) | Compatible door thickness range |
Recommended Technical Documentation
Buyers should request front elevation, side elevation, plate dimensions, pull handle projection, screw-hole positions and installation details for accurate project planning.
A technical drawing is particularly important when using the SP1016 for door manufacturing, replacement hardware or larger commercial construction projects.
The dimensions of another DEGOL push plate product should not be used as the machining template for SP1016.
Material choice and surface finishing contribute to the appearance, cleaning requirements and long-term suitability of architectural door hardware.
The SP1016 product image shows a silver-colored metallic finish consistent with a satin or brushed appearance.
The specific base material and metal grade must be confirmed with DEGOL before the product is described as SUS304 stainless steel, SUS201 stainless steel or another specific alloy.
Component | Material / Finish Information |
|---|---|
Push Plate | Metal; Exact Material to Be Confirmed |
Pull Handle | Metal; Exact Material to Be Confirmed |
Pull Handle Back Plate | Matching Metal Plate |
Standard Appearance | Silver Satin / Brushed-Look |
Screw Fixings | According to Supplied Kit |
Protective Coating | To Be Confirmed |
Stainless Steel Grade | To Be Confirmed |
Finish Customization | Subject to Availability |
Potential Surface Finish Options
Depending on DEGOL's available manufacturing configurations, buyers may inquire about satin stainless steel appearance, polished stainless steel appearance, black finish or project-specific coating options.
The exact availability of SSS, PSS or PVD options for SP1016 requires confirmation.
Surface Care
For routine cleaning, use a soft cloth and a mild cleaning solution suitable for the confirmed material and finish.
Avoid abrasive pads and aggressive cleaning chemicals that may scratch or damage decorative metal surfaces.
The DEGOL SP1016 Push Pull Handle Set is suitable for evaluation in residential and commercial architectural door hardware projects.
1. Office Buildings
The modern long-plate design can coordinate with office entrances, meeting rooms and shared workspace interiors.
2. Hotels and Hospitality Projects
The matching push-and-pull arrangement offers a uniform visual style for compatible hotel service-area doors and interior access points.
3. Commercial Interior Doors
SP1016 can be considered for commercial doors requiring a dedicated push surface and pull grip without an integrated handle lockset.
4. Schools and Educational Buildings
Push plates and pull handles may be used on suitable doors in educational facilities, subject to accessibility and building requirements.
5. Healthcare and Public Buildings
Where permitted by the applicable requirements, push and pull door fittings can provide a recognizable operating surface for manually operated doors.
6. Retail Stores
The silver metallic appearance and elongated backing plate design can complement modern retail interiors.
7. Residential Interior Doors
The SP1016 style may be used on suitable residential doors where a push plate and pull handle configuration is preferred.
8. Door Hardware Replacement Projects
The matching plates may be considered for compatible replacement installations after confirming hole locations, door construction and mounting requirements.
Door Type | Compatibility Guidance |
|---|---|
Wooden Doors | Suitable with appropriate fixings and door thickness |
Solid Timber Doors | Compatible where mounting conditions are adequate |
Metal Doors | Requires suitable fasteners and reinforcement |
Commercial Interior Doors | Subject to door operation and project requirements |
Office Doors | Suitable for compatible manual door applications |
Hotel Service Doors | Subject to project and access requirements |
Utility Room Doors | May be used where push / pull operation is appropriate |
Aluminum-Framed Doors | Depends on mounting area and structural support |
Glass Doors | Requires specially compatible fixing hardware; not confirmed |
Fire-Rated Doors | Only where hardware and alterations are permitted by the approved assembly |
Emergency Exit Doors | Must not interfere with required compliant exit hardware |
Before selecting the SP1016, confirm that the door's opening direction, latching hardware and mounting construction match the intended push and pull configuration.
Step 1 – Check the Door Configuration
Confirm the door material, thickness, opening direction and available mounting area.
Step 2 – Identify the Push and Pull Sides
Determine which side of the door requires the flat push plate and which side requires the pull handle.
Step 3 – Confirm the Mounting Layout
Review the official SP1016 technical drawing and installation template, including screw-hole center distances.
Step 4 – Position the Push Plate
Place the flat plate at the specified operating height and mark the fixing positions.
Step 5 – Secure the Push Plate
Fix the plate using suitable screws or the mounting components specified for the door material.
Step 6 – Position the Pull Handle Plate
Align the matching pull handle and backing plate on the required side of the door.
Step 7 – Secure the Pull Handle Assembly
Install the mounting fasteners according to the confirmed product design.
Step 8 – Check Operation
Open and close the door several times to confirm that the push plate and pull handle are securely attached and do not interfere with locks, hinges or door closers.
Step 9 – Final Inspection
Check fastening security, hardware alignment, grip clearance and surface condition.
Installation Note: Exact fixing methods and permitted mounting locations must be confirmed with the supplied instructions. Accessibility requirements and door assembly approvals may affect installation height and hardware selection.
1. Matching Push and Pull Combination
The set features a flat push plate and a coordinated pull handle plate, creating a consistent architectural hardware appearance.
2. Modern Rounded-End Design
The long oval-ended backing plates provide a clean, contemporary profile for suitable residential and commercial interiors.
3. Practical Manual Operation
The push plate provides a defined contact surface, while the raised handle offers a dedicated gripping point.
4. Minimalist Metallic Appearance
The silver metal finish shown in the product image coordinates with various modern door finishes and architectural hardware styles.
5. Surface-Mounted Hardware Design
The visible plate configuration supports straightforward hardware positioning when used with compatible door materials and fasteners.
6. Suitable for Multiple Building Projects
The product category can be considered for offices, hotels, public facilities and other interior door applications.
7. Coordinated Door Hardware Styling
The SP1016 may be visually paired with compatible locks, hinges and door closers in a unified hardware scheme.
8. Wholesale Procurement Support
DEGOL accepts purchasing inquiries for specifications, samples, quantities and commercial quotations.
9. OEM / ODM Inquiry Options
Customers can discuss private-label packaging, finishes and other customization needs, subject to production feasibility.
DEGOL Hardware welcomes OEM and ODM inquiries from architectural hardware importers, distributors, wholesalers and private-label brands.
For the SP1016 Push Pull Handle Set, customization requirements can be reviewed according to product design, order quantities and manufacturing capabilities.
OEM / ODM Service | Description |
|---|---|
Custom Branding | Buyer logo and product branding requirements |
Private Label Packaging | Customized boxes for distributor brands |
Surface Finishes | Finish options subject to factory confirmation |
Material Selection | Available material specifications upon inquiry |
Product Dimensions | Custom sizing requests subject to feasibility |
Customized Packaging | Carton labels, barcodes and shipping marks |
Project Coordination | Matching products for architectural hardware ranges |
Bulk Production | Order planning and quantity discussion |
Product Samples | Sample requests for quality and fitting evaluation |
Technical Drawings | Product dimension and installation documentation inquiries |
For customized projects, buyers should provide required materials, dimensions, finish specifications, quantity estimates and packaging requirements.
Item | Details |
|---|---|
Product Model | SP1016 |
Product Name | Push Pull Handle |
Brand | DEGOL |
Product Combination | Push Plate + Pull Handle with Back Plate |
Order Type | Wholesale / Project Procurement |
Unit of Sale | To Be Confirmed |
MOQ | Contact DEGOL Sales Team |
Sample Availability | Upon Inquiry |
Standard Packaging | To Be Confirmed |
Packaging Contents | According to Confirmed Product Kit |
Inner Packaging | Based on Order Requirements |
Export Carton | According to Shipping Arrangement |
Customized Packaging | OEM Packaging Upon Inquiry |
Lead Time | Based on Confirmed Order |
Shipping Port | Confirm with Sales Team |
Payment Terms | According to Commercial Quotation |
Country of Origin | China |
Supplier | Jiangmen Degol Hardware Co., Ltd. |
Wholesale Ordering Information
To request a quotation, buyers should provide the model number, required quantity, target country, preferred finish, material requirements and expected delivery date.
For project orders, technical drawings and installation compatibility information should be confirmed before bulk production.
Jiangmen Degol Hardware Co., Ltd. – Architectural Door Hardware Manufacturer & Supplier in China
DEGOL Hardware is a China-based architectural hardware company offering product sourcing and customization services for international building hardware buyers.
According to its official website, DEGOL has operated since 2012 and describes a business covering door accessories, furniture accessories, bathroom accessories and staircase accessories.
DEGOL's door hardware portfolio includes push pull handles, door handles, locks, hinges and other architectural fitting categories.
Commercial Door Hardware Supply
The company offers push and pull hardware products designed for different building and door hardware applications.
OEM / ODM Services
International customers can submit inquiries covering private-label products, packaging and available customization options.
International Wholesale Support
DEGOL works with wholesale and project buyers seeking multiple architectural hardware categories through a single supplier contact.
Product Specifications and Samples
Customers can contact the company for product specifications, technical drawings, samples and current commercial terms.
Direct Factory Contact
Company: Jiangmen Degol Hardware Co., Ltd.
Website: degolhardware.com
WhatsApp: +86 13725946499
Email: info@degolhardware.com
Q1: What is the DEGOL SP1016 Push Pull Handle?
The SP1016 is a push and pull door hardware model shown as a matching flat push plate and raised pull handle with elongated rounded-end backing plates.
Q2: What is the difference between a push plate and a pull handle?
A push plate provides a flat contact area for opening a door by pushing. A pull handle offers a raised gripping surface for opening a door by pulling.
Q3: Is the SP1016 made of stainless steel?
The product is shown with a silver metallic appearance, and DEGOL supplies stainless steel push pull hardware. However, the exact material and stainless steel grade for this SP1016 configuration require confirmation.
Q4: Is the SP1016 suitable for commercial doors?
The push pull configuration may be suitable for compatible commercial doors, depending on door construction, usage conditions and applicable building requirements.
Q5: Can the SP1016 be installed on wooden doors?
It may be installed on suitable wooden doors using appropriate mounting fasteners and a verified installation layout.
Q6: Can this push pull handle be used on metal doors?
Metal door installation may be possible with appropriate fixing hardware and sufficient reinforcement.
Q7: What finish is shown in the SP1016 product image?
The uploaded product image shows a silver-colored metal surface with a satin or brushed-look appearance.
Q8: What are the dimensions of the SP1016?
The exact back plate length, width, thickness, pull handle projection and mounting-hole distances should be confirmed using the current SP1016 technical drawing.
Q9: Does the SP1016 include a door lock?
No integrated lock is visible in the supplied product image. Required latching or locking hardware should be specified separately.
Q10: Is SP1016 suitable for glass doors?
Glass door installation requires an appropriate fixing system and confirmed compatibility. Standard metal or wood door fasteners should not be assumed suitable for glass.
Q11: Can DEGOL customize the push pull handle finish?
Customers may request finish customization information from DEGOL. Available options depend on materials, production capabilities and minimum order requirements.
Q12: Does DEGOL provide OEM or private label service?
DEGOL accepts OEM and private-label inquiries covering packaging, branding and other product requirements, subject to feasibility.
Q13: Can I order the SP1016 in bulk?
Yes. Wholesale buyers can contact DEGOL to discuss purchase quantities, available configurations, MOQ and quotation details.
Q14: Does the SP1016 come with mounting screws?
The supplied accessory package must be checked against the confirmed SP1016 product kit before ordering.
Q15: How can I request a wholesale quotation for SP1016?
Contact DEGOL through WhatsApp, email or the official website. Provide the model SP1016, order quantity, required finish, destination country and any customization requests.
Looking for an SP1016 Stainless Steel Push Pull Door Handle Set with Back Plates for your architectural door hardware range? Contact DEGOL Hardware for product specifications, technical drawings, available materials and finishes, sample information and wholesale pricing.
Product Model: SP1016
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your SP1016 Stainless Steel Push Pull Door Handle Set with Back Plates Wholesale Quote Today.
