+86 13725946499      info@degolhardware.com
You are here: Home » Blogs » Industry News » What are the standard specifications for the installation of door hinges?

PRODUCT CATEGORY

What are the standard specifications for the installation of door hinges?

Views: 0     Author: Site Editor     Publish Time: 2023-06-09      Origin: Site

sdghgejh-800-800


Different doors have different heights and thicknesses, so the installation position of the door hinge also needs to change accordingly. Therefore, there is no standard installation position for door hinges, which is carried out according to most installation standards in the market.Next, let's talk about how to install the hinge.


1.location

Positioning is the first and most important step in installing the door hinge. The positioning of the hinge is not just a simple matter, it should be considered based on the size of the door, the size of the hinge, and the weight bearing capacity you want.


2.Slotting

After the door hinge is positioned, the next thing to do is to slot it. Be particularly careful and cautious when slotting, and carefully observe the changes in the depth of the groove. Do not open it too shallow, as it will prevent the door from closing; But it should not be opened too deep, as this will cause a crack between the door and the frame.


3.fixed

After completing the above two steps, the next step is to fix the door hinge. The fixing of the hinge is actually quite simple, which is to first fix the left side of the hinge to the door, and then fix the right side of the hinge to the door frame. This is all right, and then use a small screwdriver to fine tune it.


Contact us

QUICK LINK

PRODUCTS

NEWS CENTER

CONTACT US

 Room 501, Building 2, No. 898 Jiangmen Avenue Middle, Pengjiang District, Jiangmen CityGuangdong, China  529000 
  +86-750-3915520
  +86 13725946499
  info@degolhardware.com
  jennyfung567
  13725946499
 
Leave a Message
Contact us
Copyright  2021 Degol Hardware Co., Ltd  .|Sitemap