LH1009
Degol
| Availability: | |
|---|---|
| Quantity: | |
① LH1009 – Stainless Steel Arc-Shaped Curved Tubular Door Lever Handle on Round Rose for Residential and Hotel Doors
| Product Attribute | Specification |
|---|---|
| Model Number | LH1009 |
| Lever Length | 135 mm |
| Lever Height | 65 mm |
| Lever Diameter | Ø19 mm |
| Lever Section | Ø19 mm Round Tubular Profile |
| Rose Diameter | Ø53 mm |
| Suitable Door Thickness | 35–55 mm |
| Spindle Size | 8 × 8 mm |
| Fixing Screw | M4 |
| Fixing Screw Quantity | 4 pcs (Drawing Reference) |
Note: Specifications are based on the supplied LH1009 engineering drawing. Final material grade, mounting configuration, lock compatibility and included accessories should be confirmed before ordering.
PRODUCT INTRODUCTION
The DEGOL LH1009 Stainless Steel Arc-Shaped Curved Tubular Door Lever Handle on Round Rose is a modern architectural door handle featuring a distinctive sweeping curved tubular profile and circular mounting rose.
Designed for compatible residential, hospitality and commercial interior doors, the LH1009 combines a smooth stainless steel appearance with an elegant arc-shaped lever design.
Unlike traditional straight tubular door handles, the LH1009 incorporates a gently curved cylindrical gripping section extending from an angular transition near the mounting stem toward a rounded outer end.
This flowing arc-shaped profile creates a contemporary architectural appearance while maintaining a familiar tubular gripping form.
The LH1009 features a 135 mm lever length and 65 mm lever height, providing a practical configuration for compatible lever-operated door applications.
Its Ø19 mm round tubular lever section creates a clean cylindrical appearance that complements modern residential and commercial interiors.
The handle is mounted on a Ø53 mm circular rose, providing a coordinated appearance between the curved lever and mounting assembly.
Manufactured from stainless steel, the LH1009 is designed for architectural hardware applications where material durability, appearance and appropriate mechanical performance are important.
The reference product image features a satin brushed stainless steel appearance, emphasizing the smooth metallic surface and continuous curved lever profile.
The engineering drawing also illustrates polished stainless steel, PVD gold and PVD black finish options.
These decorative finishes allow buyers to consider different appearances for residential developments, hotels, apartments, offices and commercial interior projects.
The LH1009 is designed for use with compatible lever-operated latch or mortise lock systems.
The engineering drawing specifies an 8 × 8 mm square spindle and a reference door thickness range of 35–55 mm.
Separate circular keyhole escutcheons are illustrated in the product image, allowing buyers to consider a coordinated handle and lock trim arrangement, subject to the selected lock configuration.
For international architectural hardware wholesalers, importers and construction project buyers, the LH1009 offers a distinctive curved tubular handle design for wholesale purchasing and OEM/ODM cooperation.
Key Product Features:
Distinctive arc-shaped curved tubular lever design.
Smooth sweeping cylindrical handle profile.
Modern angular transition near the mounting stem.
Rounded tubular gripping end.
Contemporary architectural appearance.
Stainless steel construction.
135 mm lever length.
65 mm lever height.
Ø19 mm round tubular lever section.
Ø53 mm circular mounting rose.
Compatible with 8 × 8 mm square spindle systems.
Reference door thickness range of 35–55 mm.
Satin, polished, PVD gold and PVD black finish references.
Coordinated circular keyhole escutcheons illustrated.
Suitable for selected residential, hotel and commercial interior doors.
OEM/ODM customization and wholesale purchasing inquiries welcomed.
APPLICATIONS
The LH1009 Stainless Steel Arc-Shaped Curved Tubular Door Lever Handle is suitable for architectural projects requiring a modern curved lever design with a clean stainless steel appearance.
Residential Buildings and Apartments
Suitable for modern residential interiors, apartment doors, housing developments and renovation projects requiring contemporary stainless steel door hardware.
Hotels and Hospitality Projects
A design option for hotel guest rooms, serviced apartments, boutique hotels and hospitality interior doors where compatible mechanical locking systems are specified.
Office Buildings and Commercial Interiors
The curved tubular profile complements office doors, meeting rooms, administrative areas and modern commercial interior spaces.
Architectural and Interior Design Projects
The arc-shaped lever design provides an alternative to conventional straight tubular handles for architects, interior designers and property developers seeking distinctive architectural door hardware.
Residential Construction and Renovation
Suitable for consideration in residential construction and refurbishment projects requiring coordinated stainless steel lever handle designs.
Hospitality and Commercial Renovation
Can be considered for selected hotel, office and commercial renovation projects where modern curved door hardware is required.
Wholesale and Hardware Distribution
A relevant product for architectural hardware wholesalers, building material distributors, door hardware importers and professional hardware retailers seeking curved stainless steel lever handle designs.
The LH1009 is particularly relevant to international wholesale and project sourcing inquiries from South American markets, including Brazil, Chile, Peru, Colombia and Argentina.
Application Note:
The LH1009 is intended for compatible architectural door applications.
For high-traffic, fire-rated, security-rated or exposed exterior installations, buyers should verify the required material grade, product performance, lock compatibility and applicable local standards before specification.
SUITABLE DOOR TYPES
The DEGOL LH1009 Arc-Shaped Curved Stainless Steel Tubular Door Lever Handle can be considered for various compatible door constructions, subject to lock specifications, mounting requirements and installation conditions.
Wooden Interior Doors
Suitable for compatible residential, hotel, apartment and office wooden interior doors.
Solid Timber Doors
Applicable where the door thickness, latch or mortise lock dimensions and fixing arrangement meet the product requirements.
Metal Doors
Can be considered for metal doors with appropriate mounting preparation, reinforcement where required and compatible locking hardware.
Apartment Doors
A contemporary architectural hardware option for apartment buildings and residential property development projects.
Hotel Room Doors
Suitable for selected hospitality interior installations where the required mechanical locking configuration and installation specifications are compatible.
Office and Commercial Interior Doors
Applicable to compatible office, meeting room and administrative doors requiring lever-operated latch or mortise lock hardware.
Door Compatibility Note:
The LH1009 engineering drawing specifies a reference door thickness range of 35–55 mm.
Before bulk ordering, buyers should confirm:
Required door thickness.
Square spindle dimensions.
Mortise lock or latch compatibility.
Fixing hole positions.
Mounting plate specifications.
Required handle orientation.
Keyhole escutcheon compatibility.
Applicable local installation standards.
For South American construction projects, compatibility with locally selected mortise locks, door preparations and installation requirements should be checked in advance.
TECHNICAL DRAWINGS & LOCK COMPATIBILITY
The DEGOL LH1009 Door Lever Handle Set features a curved tubular lever, circular mounting rose and illustrated separate round keyhole escutcheons.
Key Engineering Dimensions
Lever Length: 135 mm.
Lever Height: 65 mm.
Lever Diameter: Ø19 mm.
Lever Section: Ø19 mm round tubular profile.
Rose Diameter: Ø53 mm.
Suitable Door Thickness: 35–55 mm.
Square Spindle Size: 8 × 8 mm.
Fixing Screw Reference: M4.
Fixing Screw Quantity: 4 pcs as indicated in the engineering drawing.
Dimensional Tolerances
According to the supplied engineering drawing:
Lever Length Tolerance: ±1.0 mm.
Lever Height Tolerance: ±1.0 mm.
Lever Diameter Tolerance: ±0.2 mm.
Rose Diameter Tolerance: ±0.5 mm.
Spindle Size Tolerance: ±0.1 mm.
Arc-Shaped Curved Tubular Lever Design
The LH1009 features a cylindrical lever with a smooth sweeping curved profile.
The handle extends from an angled transition near the mounting stem into a gently arched gripping section.
Unlike conventional straight tubular lever handles, the LH1009 uses a continuous curved gripping profile to create a distinctive architectural appearance.
Its Ø19 mm round tubular section provides a streamlined cylindrical form suitable for modern interior door hardware collections.
Round Rose Mounting Design
The LH1009 incorporates a circular mounting rose measuring Ø53 mm in diameter.
The round rose complements the curved tubular lever and provides a coordinated mounting appearance.
The supplied product reference illustrates circular mounting components and separate mounting rings.
The final mounting method, internal spring mechanism and fixing arrangement should be confirmed before ordering.
Square Spindle Compatibility
The engineering drawing specifies an 8 × 8 mm square spindle.
The spindle connects the lever handles through a compatible latch or mortise lock operating mechanism.
Buyers should verify the lock follower dimensions, spindle length and mounting requirements before installation.
Mortise Lock and Latch Compatibility
The LH1009 can be considered for compatible lever-operated latch or mortise lock systems.
Before installation, buyers should verify:
Mortise lock or tubular latch compatibility.
Lock follower dimensions.
Square spindle requirements.
Door thickness and mounting clearances.
Rose fixing positions.
Required spindle length and engagement.
Lever return and latch operation.
The supplied engineering drawing does not establish a fixed PZ centre distance or a specific mortise lock body.
Circular Keyhole Escutcheons
The supplied product image illustrates separate circular keyhole escutcheons.
These accessories provide a coordinated visual arrangement when the handle is installed with a compatible locking system.
The illustrated keyhole openings should not be assumed to fit every cylinder or lock type.
Buyers should confirm the required keyhole profile, dimensions, fixing arrangement and package inclusion before ordering.
Stainless Steel Material Selection
The LH1009 is specified as a stainless steel door lever handle.
Buyers should confirm the actual stainless steel grade available for production.
Common architectural hardware material options include:
Stainless Steel 304
Generally provides higher corrosion resistance.
Often preferred for projects requiring greater environmental resistance.
Suitable for consideration in residential and commercial hardware applications.
Stainless Steel 201
Can provide a cost-effective stainless steel material option.
Generally more suitable for controlled indoor environments.
Can be considered for price-sensitive projects where its corrosion resistance is adequate.
The availability of either grade for LH1009 must be confirmed with DEGOL.
Surface Finish Options
The supplied engineering drawing illustrates the following finishes:
SSS – Satin Stainless Steel
Brushed silver appearance with a matte metallic surface.
PSS – Polished Stainless Steel
Bright silver appearance with a reflective mirror-like surface.
PVD-GD – PVD Gold
Decorative gold appearance produced through PVD coating.
PVD-BK – PVD Black
Decorative black appearance produced through PVD coating.
These finishes provide design options for residential, hospitality and commercial architectural hardware collections.
Actual finish availability, coating specifications, color consistency and applicable minimum order quantities should be confirmed with DEGOL before ordering.
Technical Note:
All measurements are based on the supplied LH1009 engineering drawing. Final production specifications, dimensional tolerances, material grade, mounting configuration, surface finishes and included accessories should be confirmed against approved product documentation.
INSTALLATION GUIDE
The LH1009 Stainless Steel Arc-Shaped Curved Tubular Door Lever Handle on Round Rose is intended for installation with a compatible latch or mortise lock and mounting system.
The following steps provide general installation guidance.
Step 1: Confirm Door and Lock Compatibility
Check that the door thickness is within the specified 35–55 mm range.
Verify the 8 × 8 mm square spindle requirements and confirm compatibility with the selected latch or mortise lock.
Step 2: Prepare the Door
Mark the spindle opening, latch or mortise lock position and required fixing locations according to the approved installation drawing.
Confirm the required mounting positions before drilling or cutting.
Step 3: Install the Latch or Mortise Lock
Fit the compatible latch or mortise lock into the prepared door opening.
Secure it according to the lock manufacturer's installation instructions.
Step 4: Install the Square Spindle
Insert the correctly specified 8 × 8 mm square spindle through the lock follower.
Ensure that the spindle is properly aligned and provides sufficient engagement with the lever handle assemblies.
Step 5: Position the Round Rose Mounting Components
Align the circular mounting components with the spindle opening and approved fixing positions.
Ensure that the mounting assembly sits correctly against the door surface.
Step 6: Secure the Lever Handle Assembly
Fit the lever handles onto the spindle and secure the mounting components using the appropriate fixing hardware.
The engineering drawing references M4 fixing screws.
Confirm that the curved lever handles are correctly oriented for the intended door operation.
Step 7: Install Keyhole Escutcheons if Required
If the selected configuration includes separate circular keyhole escutcheons, install them according to the selected lock and keyhole specifications.
Step 8: Test Handle Operation
Check lever movement, latch retraction and handle return.
Ensure that the installed assembly operates smoothly without excessive play or interference.
Installation Note:
Installation requirements may vary depending on the door material, selected lock and fixing arrangement.
The exact package contents, including lever handles, round roses, spindle, fixing screws, escutcheons, latch or mortise lock, should be confirmed before ordering.
Professional installation is recommended for commercial and construction project applications.
FACTORY CAPABILITY
DEGOL Hardware – Professional Architectural Door Hardware Manufacturer
Jiangmen Degol Hardware Co., Ltd. is a China-based architectural hardware manufacturer and export supplier serving international importers, wholesalers, distributors and construction project buyers.
DEGOL provides door hardware and related architectural hardware solutions for residential and commercial applications.
Manufacturing and Product Supply
DEGOL supports architectural hardware product sourcing, manufacturing coordination, quality inspection, packaging and export arrangements.
The company welcomes wholesale and project-based purchasing requirements from international customers.
OEM & ODM Customization
DEGOL welcomes OEM and ODM inquiries from architectural hardware wholesalers, distributors and private-label customers.
Depending on product specifications and manufacturing feasibility, customization inquiries may include:
Custom logos and private-label branding.
Alternative stainless steel surface finishes.
Customized tubular lever dimensions.
Customized arc-shaped lever profiles.
Customized round rose configurations.
Customized keyhole escutcheon designs.
Customized packaging and carton labeling.
Product development based on customer drawings or samples.
All customization requirements are subject to technical review and commercial confirmation.
Quality Control
DEGOL incorporates quality control into its manufacturing and supply processes, with attention to material requirements, dimensional consistency, product appearance, assembly and packaging.
For stainless steel door lever handles, buyers may request available information about material specifications, surface finish quality, handle operation and relevant product testing.
Customers can also request technical specifications and applicable quality documentation before confirming wholesale orders.
International Wholesale Supply
DEGOL welcomes long-term cooperation with architectural hardware importers, building material wholesalers, distributors and construction contractors.
The company supports international B2B sourcing inquiries, including customers supplying stainless steel door hardware to South American residential, hospitality and commercial construction markets.
PACKAGING & EXPORT INFORMATION
DEGOL provides wholesale purchasing and export support for international customers interested in the LH1009 arc-shaped curved stainless steel tubular door lever handle.
Product Packaging
Packaging arrangements can be discussed according to the selected product configuration, order quantity and customer requirements.
Available packaging inquiries may include:
Protective individual product packaging.
Surface protection for brushed, polished and PVD-coated components.
Retail boxes and master cartons.
Custom logo and private-label packaging.
Product labels and carton markings.
Export carton and palletizing requirements.
Wholesale Orders
Customers can contact DEGOL to confirm the applicable minimum order quantity, sample availability, wholesale pricing and estimated production lead time.
Export and Shipping
DEGOL welcomes international shipment inquiries and can discuss export arrangements according to the destination country, order quantity and shipping requirements.
Customers may request quotations based on applicable trading terms, including FOB or CIF, subject to commercial confirmation.
Information Required for an Accurate Quotation:
Product Model: LH1009.
Required Order Quantity: Specify the requested quantity.
Material Requirements: Confirm the required stainless steel grade.
Preferred Surface Finish: Satin, Polished, PVD Gold, PVD Black or another requested finish.
Product Configuration: Confirm the required mounting accessories and lock compatibility.
Door Thickness: Confirm the project door thickness.
Customization Requirements: Specify any requested logo, dimension or configuration changes.
Packaging Requirements: Standard or private-label packaging.
Destination: Country and port.
Preferred Shipping Terms: FOB, CIF or other agreed Incoterms.
Final carton quantities, packing dimensions, shipping arrangements, payment terms and production lead times will be confirmed during the quotation process.
FAQ
Q1: What type of door handle is the LH1009?
The LH1009 is a stainless steel arc-shaped curved tubular door lever handle featuring a smooth cylindrical gripping section, sweeping curved profile and circular mounting rose. It is intended for compatible residential, hotel and commercial interior door applications.
Q2: What makes the LH1009 different from a conventional straight tubular door lever handle?
The LH1009 features a distinctive sweeping curved tubular profile rather than a conventional straight lever. Its Ø19 mm cylindrical gripping section extends from an angular mounting transition into a smooth curved shape, creating a modern architectural appearance.
Q3: What are the dimensions of the LH1009 door lever handle?
The LH1009 features a 135 mm lever length, 65 mm lever height, Ø19 mm lever diameter and Ø53 mm circular mounting rose.
Q4: What door thickness is suitable for the LH1009?
The LH1009 engineering drawing specifies a reference door thickness range of 35–55 mm. Actual compatibility depends on the approved mounting hardware, spindle length and lock configuration.
Q5: What material is used for the LH1009 door lever handle?
The LH1009 is specified as a stainless steel door lever handle. Buyers should contact DEGOL to confirm the available stainless steel grade and material specifications before ordering.
Q6: What surface finishes are available for the LH1009?
The engineering drawing illustrates satin stainless steel, polished stainless steel, PVD gold and PVD black finishes. Customers can contact DEGOL to confirm finish availability, coating specifications and customization requirements.
Q7: Is the LH1009 compatible with mortise locks and keyhole escutcheons?
The LH1009 can be considered for compatible lever-operated latch or mortise lock systems. The reference image also illustrates separate circular keyhole escutcheons. Buyers should confirm the lock follower dimensions, spindle requirements, keyhole profile and mounting positions before ordering.
Q8: Does the LH1009 include a spindle, fixing screws and keyhole escutcheons?
The engineering drawing illustrates lever handles, circular mounting components, keyhole escutcheons, fixing hardware and an installation tool. However, the exact package contents depend on the approved product configuration. Customers should confirm all included components before ordering.
Q9: Can DEGOL provide OEM/ODM customization, samples and wholesale pricing?
DEGOL welcomes OEM and ODM inquiries for custom logos, surface finishes, packaging and product configurations. Customers can also request information about sample availability, applicable MOQ and wholesale pricing.
Q10: Can DEGOL supply LH1009 stainless steel door handles to South American markets?
DEGOL welcomes wholesale and project inquiries from importers, distributors and contractors serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets. Buyers can provide their required quantity, preferred finish, destination country and shipping terms to discuss export arrangements.
CONTACT DEGOL – REQUEST A WHOLESALE QUOTE
Looking for a stainless steel arc-shaped curved tubular door lever handle on round rose for your architectural door hardware range, wholesale distribution business or construction project?
Contact DEGOL Hardware for product specifications, technical drawings, available finishes, sample information, OEM/ODM customization and wholesale pricing.
Product Model: LH1009
Product Name: Stainless Steel Arc-Shaped Curved Tubular Door Lever Handle on Round Rose for Residential and Hotel Doors
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
WhatsApp Link: https://wa.me/8613725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Whether you are an architectural hardware wholesaler, importer, building material distributor or construction project buyer, DEGOL welcomes your product sourcing inquiries.
For faster quotation processing, please provide your required quantity, preferred material grade, surface finish, lock compatibility requirements, packaging requirements and destination country.
Request Your LH1009 Arc-Shaped Curved Stainless Steel Tubular Door Lever Handle Wholesale Quote Today.