LH1026
Degol
| Availability: | |
|---|---|
| Quantity: | |
LH1026 – Stainless Steel Tubular Return-to-Door Lever Handle on 170mm Square Backplate with 72mm Euro Profile Keyhole
PRODUCT SPECIFICATIONS
The DEGOL LH1046 features a tubular stainless steel return-style lever mounted on a large square backplate with rounded corners, four fixing holes and an integrated Euro profile keyhole. The 72 mm PZ centres support installation with compatible mortise locking systems.
| Product Attribute | Specification |
|---|---|
| Model Number | LH1026 |
| Backplate Dimensions | 170 × 170 × 10 mm |
| Lever Length | 130 mm |
| Lever Diameter | Ø19 mm |
| Lever Projection | 62 mm |
| PZ Centres | 72 mm |
| Fixing Hole Diameter | Ø6.5 mm |
| Suitable Door Thickness | 35–55 mm |
| Spindle Size | 8 × 8 mm |
Note: All dimensions are based on the supplied LH1046 engineering drawing. Final material grade, finish, mounting configuration and included accessories should be confirmed before ordering.
PRODUCT INTRODUCTION
The DEGOL LH1026 Stainless Steel Tubular Return-to-Door Lever Handle combines a contemporary tubular lever design with a distinctive 170 × 170 mm square backplate, creating a coordinated architectural hardware solution for residential, hospitality and commercial door applications.
Unlike conventional lever handles mounted on small round roses or narrow rectangular backplates, the LH1046 features a large square plate with softly rounded corners and four visible corner fixing holes. This design provides a substantial mounting surface and a clean, balanced appearance suitable for modern architectural interiors.
The stainless steel lever features a straight cylindrical gripping section with a smoothly curved return-style end. Its Ø19 mm tubular profile and 130 mm lever length complement the square backplate, while the integrated Euro profile keyhole allows installation with compatible mortise locking systems.
With 72 mm PZ centres, a 62 mm lever projection and a 10 mm thick backplate, the LH1046 offers clearly defined dimensions for architectural hardware selection and project planning.
The square backplate design is particularly relevant for installations requiring a larger decorative plate or a coordinated square-format door hardware appearance.
As an architectural hardware manufacturer and export supplier, DEGOL welcomes wholesale sourcing inquiries from international importers, distributors, building material wholesalers and construction project buyers.
Key Product Features:
Modern stainless steel tubular lever with a curved return-style end.
Large 170 × 170 mm square backplate with rounded corners.
Four corner fixing holes with Ø6.5 mm diameter.
Integrated Euro profile keyhole design.
72 mm PZ centres for compatible mortise lock installations.
Ø19 mm tubular lever with 130 mm length.
62 mm lever projection and 10 mm backplate thickness.
Suitable for compatible residential, hotel and commercial interior doors.
OEM/ODM customization and wholesale purchasing inquiries welcomed.
APPLICATIONS
The LH1026 Stainless Steel Door Lever Handle on Square Backplate is suitable for consideration in architectural door hardware projects requiring a large square mounting plate, contemporary appearance and compatible locking arrangement.
Residential Buildings and Apartments
Suitable for modern residential interiors, apartment doors, housing developments and renovation projects requiring stainless steel door handles with square backplates.
Hotels and Hospitality Projects
An option for hotel guest rooms, serviced apartments, hospitality corridors and interior door installations where compatible mortise locking systems are specified.
Office Buildings and Commercial Interiors
The square backplate and tubular lever design complement office doors, meeting rooms, administrative spaces and modern commercial interior environments.
Residential Construction and Renovation Projects
A practical design option for property development and renovation projects requiring coordinated lever handles across multiple door installations.
The larger backplate may help cover existing surface marks or previous hardware openings where the new fixing arrangement is compatible.
Wholesale and Hardware Distribution
A relevant product for architectural hardware wholesalers, door hardware importers, building material distributors and hardware retailers seeking stainless steel lever handles with square backplates.
The LH1046 is suitable for wholesale sourcing discussions with buyers serving South American markets, including Brazil, Chile, Peru, Colombia and Argentina.
For high-traffic, security-rated, fire-rated or exposed exterior applications, the required product performance and applicable compliance requirements must be verified separately.
SUITABLE DOOR TYPES
The DEGOL LH1026 Tubular Door Lever Handle on Square Backplate can be considered for various door installations, subject to door construction, lock compatibility and mounting requirements.
Wooden Interior Doors
Suitable for compatible residential, apartment, hotel and office interior wooden doors.
Solid Timber Doors
Applicable where the door thickness, mortise lock dimensions and fixing arrangement meet the product specifications.
Metal Doors
Can be considered for metal doors with suitable mounting preparation, reinforcement where necessary and compatible locking hardware.
Apartment Doors
A contemporary architectural hardware option for apartment buildings and residential property development projects.
Hotel Room Doors
Suitable for selected hospitality interior installations where the door thickness, locking mechanism and project specifications are compatible.
Office and Commercial Interior Doors
Applicable to compatible office, meeting room and administrative doors requiring lever-operated mortise lock hardware.
Door Compatibility Note:
The LH1046 engineering drawing specifies a reference door thickness range of 35–55 mm.
Before bulk ordering, buyers should confirm the door thickness, 8 mm square spindle, 72 mm PZ centres, fixing hole positions and selected mortise lock specifications.
For South American construction projects, compatibility with locally selected mortise locks, Euro profile cylinders and applicable installation standards should be checked in advance.
TECHNICAL DRAWINGS & LOCK COMPATIBILITY
The DEGOL LH1026 Door Lever Handle Set features a square backplate with four corner fixing holes, an integrated Euro profile keyhole and dimensions intended for compatible lever-operated mortise locking systems.
Key Engineering Dimensions
Backplate Height: 170 mm.
Backplate Width: 170 mm.
Backplate Thickness: 10 mm.
Lever Length: 130 mm.
Lever Diameter: Ø19 mm.
Lever Projection: 62 mm.
PZ Centres: 72 mm.
Fixing Hole Diameter: Ø6.5 mm.
Suitable Door Thickness: 35–55 mm.
Square Spindle: 8 × 8 mm.
Square Backplate and Fixing Design
The LH1026 features a 170 × 170 mm square backplate with rounded corners and four fixing holes positioned near the plate corners.
The reference drawing specifies a fixing hole diameter of Ø6.5 mm.
Before installation, buyers should verify the actual fixing hole centre positions, door preparation and required mounting hardware.
Euro Profile Keyhole Dimensions
The supplied engineering drawing indicates the following reference dimensions:
Upper Keyhole Width: 17.2 mm.
Overall Keyhole Height: 33.2 mm.
Lower Keyhole Width: 10.2 mm.
These measurements should be checked against the selected Euro profile cylinder and mortise lock configuration before installation.
Mortise Lock Compatibility
The LH1026 is intended for use with a compatible lever-operated mortise lock featuring 72 mm PZ centres and an appropriate 8 mm square spindle follower.
The 72 mm PZ measurement refers to the centre-to-centre distance between the lever spindle and Euro profile cylinder position.
Buyers should verify the selected mortise lock body, cylinder dimensions, fixing positions and door preparation requirements before ordering.
Spindle and Fixing Requirements
The engineering drawing specifies:
Spindle Size: 8 × 8 mm.
Reference Spindle Length: Door thickness + 20–30 mm.
Fixing Screw Options: M5 × 30 / 35 / 40 / 45 mm.
Actual spindle length and screw selection depend on the door thickness and approved mounting configuration.
Surface Finish Options
The reference engineering drawing illustrates the following stainless steel finishes:
SSS: Satin Stainless Steel – Brushed Silver.
PSS: Polished Stainless Steel – Mirror Silver.
PVD-GD: PVD Gold.
PVD-BK: PVD Black.
Available finishes and minimum order requirements for LH1026 should be confirmed with DEGOL before placing an order.
Material Selection
The supplied engineering reference compares stainless steel grades 304 and 201.
Stainless Steel 304: Generally provides better corrosion resistance and is often preferred for applications requiring greater environmental resistance.
Stainless Steel 201: Can provide a cost-effective material option for suitable indoor applications.
Customers should confirm the available material grade, required environmental resistance and relevant product documentation before ordering.
Technical Note:
All measurements are based on the supplied LH1026 engineering drawing. Final production specifications, dimensional tolerances, mounting details and included accessories should be confirmed against approved product documentation.
INSTALLATION GUIDE
The LH1026 Stainless Steel Door Lever Handle on Square Backplate is intended for installation with a compatible mortise lock and mounting system.
The following instructions provide general installation guidance.
Step 1: Confirm Door and Lock Compatibility
Check that the door thickness is within the specified 35–55 mm range and that the selected mortise lock supports 72 mm PZ centres and an 8 mm square spindle.
Step 2: Prepare the Door
Mark the spindle opening, Euro profile cylinder position and four backplate fixing positions according to the approved installation drawing and selected lock requirements.
Step 3: Install the Mortise Lock
Fit the compatible mortise lock body into the prepared door opening and secure it according to the lock manufacturer's instructions.
Step 4: Install the Square Spindle
Insert the correctly sized 8 × 8 mm square spindle through the lock follower. Confirm sufficient engagement with the lever handle assemblies.
Step 5: Position the Square Backplates
Align the square backplates with the lever spindle, Euro profile cylinder opening and fixing holes.
Ensure the plates sit correctly against the door surfaces.
Step 6: Secure the Lever Handle Assembly
Fit the lever handle assemblies and secure the square backplates using the appropriate mounting hardware.
Select the fixing screw lengths according to the door thickness and approved installation configuration.
Step 7: Test Handle and Lock Operation
Check the lever movement, latch retraction, handle return and cylinder operation.
Ensure the installed assembly operates smoothly without excessive play or interference.
Installation Note:
Installation requirements may vary depending on the door material, selected mortise lock and fixing arrangement.
The exact package contents, including lever handles, backplates, spindle, fixing screws, mortise lock and cylinder, should be confirmed before ordering.
Professional installation is recommended for commercial and construction project applications.
FACTORY CAPABILITY
DEGOL Hardware – Professional Architectural Door Hardware Manufacturer
Jiangmen Degol Hardware Co., Ltd. is a China-based hardware manufacturer and export supplier providing architectural hardware solutions for international importers, wholesalers, distributors and construction project buyers.
DEGOL supplies door hardware, glass hardware, furniture hardware, window hardware and related products for residential and commercial applications.
Manufacturing and Product Supply
DEGOL's manufacturing and supply operations cover product development, production, assembly, quality control, packaging and export coordination.
The company supports wholesale hardware sourcing and project-based purchasing requirements for international customers.
OEM & ODM Customization
DEGOL welcomes OEM and ODM inquiries from architectural hardware wholesalers, distributors and private-label customers.
Depending on product specifications and manufacturing feasibility, customization inquiries may include:
Custom logos and private-label branding.
Alternative stainless steel surface finishes.
Product dimension and configuration adjustments.
Customized packaging and carton labeling.
Product development based on customer drawings or samples.
All customization requirements are subject to technical review and commercial confirmation.
Quality Control
DEGOL incorporates quality control into its manufacturing and supply processes, with attention to material requirements, dimensional consistency, product appearance, assembly and packaging.
Customers may request available technical specifications, material information and relevant quality documentation before confirming wholesale orders.
International Wholesale Supply
DEGOL welcomes long-term cooperation with architectural hardware importers, building material wholesalers, distributors and construction contractors.
The company supports international B2B sourcing inquiries, including customers supplying stainless steel door hardware to South American residential, hospitality and commercial construction markets.
PACKAGING & EXPORT INFORMATION
DEGOL provides wholesale purchasing and export support for international customers interested in the LH1046 stainless steel door lever handle set.
Product Packaging
Packaging arrangements can be discussed according to the selected product configuration, order quantity and customer requirements.
Available packaging inquiries may include:
Protective individual product packaging.
Retail boxes and master cartons.
Custom logo and private-label packaging.
Product labels and carton markings.
Export carton and palletizing requirements.
Wholesale Orders
Customers can contact DEGOL to confirm the applicable minimum order quantity, sample availability, wholesale pricing and estimated production lead time.
Export and Shipping
DEGOL welcomes international shipment inquiries and can discuss export arrangements according to the destination country, order quantity and shipping requirements.
Customers may request quotations based on applicable trading terms, including FOB or CIF, subject to commercial confirmation.
Information Required for an Accurate Quotation:
Product Model: LH1026.
Required Order Quantity: Specify the requested quantity.
Material Requirements: Confirm the required stainless steel grade.
Preferred Surface Finish: SSS, PSS, PVD Gold, PVD Black or other requested finish.
Product Configuration: Confirm the required accessories and lock compatibility.
Packaging Requirements: Standard or private-label packaging.
Destination: Country and port.
Preferred Shipping Terms: FOB, CIF or other agreed Incoterms.
Final carton quantities, packing dimensions, shipping arrangements, payment terms and production lead times will be confirmed during the quotation process.
FAQ
Q1: What type of door handle is the LH1026?
The LH1046 is a stainless steel tubular return-style lever handle mounted on a 170 × 170 mm square backplate with rounded corners, four fixing holes and an integrated Euro profile keyhole. It is intended for compatible residential, hotel and commercial door hardware applications.
Q2: What are the dimensions of the LH1026 door lever handle?
The LH1046 features a 170 × 170 × 10 mm square backplate, 130 mm lever length, Ø19 mm tubular lever diameter and 62 mm lever projection. The distance between the lever spindle and Euro profile keyhole centres is 72 mm.
Q3: Is the LH1026 compatible with 72 mm PZ mortise locks?
The LH1046 reference design uses 72 mm PZ centres and an 8 mm square spindle. Buyers should confirm compatibility with the selected mortise lock body, cylinder and fixing arrangement before ordering.
Q4: What door thickness is suitable for the LH1046?
The engineering drawing specifies a reference door thickness range of 35–55 mm. The required spindle length and fixing screw dimensions depend on the actual door thickness and mounting configuration.
Q5: What is the fixing hole diameter of the LH1026 square backplate?
The LH1046 features four corner fixing holes with a reference diameter of Ø6.5 mm. Buyers should confirm the fixing hole positions and required mounting hardware before installation.
Q6: Is the LH1026 available in stainless steel 304 or 201?
The engineering reference includes a comparison of stainless steel grades 304 and 201. Customers should contact DEGOL to confirm which material grades are available for LH1046 and select the appropriate specification for their intended application.
Q7: What surface finishes are available for the LH1026?
The reference drawing illustrates satin brushed stainless steel, polished stainless steel, PVD gold and PVD black. Buyers can contact DEGOL to confirm available finishes, customization requirements and applicable minimum order quantities.
Q8: Does the LH1046 include a mortise lock, cylinder and installation accessories?
The exact package contents depend on the approved product configuration. Customers should confirm whether the quotation includes the lever handle pair, square backplates, spindle, fixing screws, mortise lock, cylinder or other accessories.
Q9: Can DEGOL provide OEM/ODM customization, samples and wholesale pricing?
Yes. DEGOL welcomes OEM and ODM inquiries for custom logos, surface finishes, packaging and product configurations. Customers can also request information about sample availability, applicable MOQ and wholesale pricing.
Q10: Can DEGOL supply LH1046 door handles to South American markets?
DEGOL welcomes wholesale and project inquiries from importers, distributors and contractors serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets. Buyers can provide their order quantity, destination country and preferred shipping terms to discuss export arrangements.
CONTACT DEGOL – REQUEST A WHOLESALE QUOTE
Looking for a stainless steel tubular return-to-door lever handle on a 170mm square backplate with a 72mm Euro profile keyhole for your architectural door hardware range, wholesale distribution business or construction project?
Contact DEGOL Hardware for product specifications, technical drawings, available finishes, sample information, OEM/ODM customization and wholesale pricing.
Product Model: LH1046
Product Name: Stainless Steel Tubular Return-to-Door Lever Handle on 170mm Square Backplate with 72mm Euro Profile Keyhole
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Whether you are an architectural hardware wholesaler, importer, building material distributor or construction project buyer, DEGOL welcomes your product sourcing inquiries.
For faster quotation processing, please provide your required quantity, preferred material grade, surface finish, packaging requirements and destination country.
Request Your LH1046 Stainless Steel Tubular Lever Handle on Square Backplate Wholesale Quote Today.