 |
LH1113
Degol
| Quantity: | |
|---|---|
The DEGOL LH1113 Modern Sculpted Twisted Leaf Door Lever Handle Set is a contemporary architectural door hardware design featuring an elegant leaf-shaped gripping section, a gently twisted connecting profile, and a coordinated circular mounting rose.
The distinctive LH1113 lever combines organic curves with sculpted metallic surfaces. Its profile begins with a rounded connecting section near the mounting rose, narrows through a softly twisted waist, and expands into a fuller leaf-shaped outer grip.
Unlike conventional straight tubular door handles or simple flat lever designs, the LH1113 features a flowing three-dimensional shape that creates a decorative architectural appearance.
The sculpted lever profile is especially visible in the front and top reference views, where the inner connecting section transitions into a broad, smoothly contoured leaf-shaped end.
The preliminary engineering drawing illustrates a satin brushed silver metallic appearance, making the design suitable for consideration in modern residential interiors, apartments, hotels, offices, and contemporary commercial spaces.
According to the supplied reference drawing, the lever length is approximately 125–130 mm, the handle projection is approximately 60 mm, and the maximum lever width is approximately 22 mm.
The illustrated round mounting rose measures approximately 52 mm in diameter and 10 mm in thickness.
The drawing also shows matching round Euro-profile-style keyhole escutcheons with an approximate diameter of 52 mm and reference thickness of 10 mm.
A square spindle measuring approximately 8 × 8 mm is illustrated, together with internal fixing plates and opposing lever assemblies.
The preliminary reference information identifies stainless steel as a typical material category, with SUS304 and SUS201 mentioned as examples. However, the actual LH1113 material grade, construction, surface treatment, and final dimensions have not been independently verified.
The drawing uses the publicly identified DEGOL LH1103 as a comparable model. Therefore, its dimensions must be treated as reference values rather than confirmed LH1113 production specifications.
Jiangmen Degol Hardware Co., Ltd. welcomes wholesale, OEM, and ODM inquiries from international architectural hardware importers, door handle distributors, door manufacturers, building material suppliers, contractors, and project purchasing teams.
Distinctive sculpted twisted leaf-shaped lever design
Smooth three-dimensional curved gripping profile
Narrow twisted connecting section
Fuller, rounded leaf-shaped outer grip
Modern satin brushed silver appearance
Coordinated round mounting rose
Approx. 125–130 mm reference lever length
Approx. 60 mm reference handle projection
Approx. 22 mm reference maximum lever width
Approx. Ø52 mm reference rose diameter
Approx. 10 mm reference rose thickness
Matching round Euro-profile-style escutcheons illustrated
Approx. 8 × 8 mm reference square spindle
Approx. 38 mm reference mounting-hole pitch
Suitable for contemporary architectural hardware collections
Wholesale and OEM / ODM inquiries welcomed
Important Product Notice: The supplied drawing is a preliminary engineering reference based on comparable product information. The exact LH1113 model specifications must be confirmed using approved DEGOL technical documentation or a physical sample before manufacturing, purchasing, or installation.
The DEGOL LH1113 is a modern lever-on-round-rose door handle design characterized by its sculpted leaf-shaped gripping section, twisted connecting profile, rounded outer end, and circular mounting base.
A lever door handle is an architectural hardware component used to operate a compatible door latch or locking mechanism through a spindle connection.
The LH1113 differs visually from conventional straight tubular lever handles because its gripping section features a changing three-dimensional profile rather than a constant cylindrical diameter.
Its most distinctive design characteristic is the transition from a narrower inner section into a fuller leaf-shaped outer grip.
The illustrated lever also features a gentle twist through its connecting section, giving the handle a flowing, sculptural appearance.
1. Sculpted Leaf-Shaped Lever Profile
The defining feature of LH1113 is its broad, smoothly contoured leaf-shaped gripping section.
The outer portion of the handle has an elongated oval-like appearance with a rounded, tapered end.
2. Twisted Connecting Section
The handle transitions through a gently twisted waist between the mounting neck and the fuller outer grip.
This feature creates a more dimensional silhouette than a conventional straight lever.
3. Fuller Outer Gripping Area
The lever expands toward its outer section, creating a distinctive leaf-like profile.
The reference maximum lever width is approximately 22 mm.
4. Smooth Rounded Outer Tip
The outer end gradually narrows into a softly rounded tip.
Actual tip dimensions and edge radii must be confirmed through approved drawings.
5. Flowing Three-Dimensional Curves
The illustrated design features smooth transitions between the inner neck, twisted waist, and leaf-shaped gripping section.
The combination of these contours gives the handle its decorative architectural character.
6. Rounded Connecting Neck
The lever joins the mounting rose through a rounded connecting neck.
This creates a balanced transition between the sculpted lever and the circular mounting hardware.
7. Round Mounting Rose
The handle is illustrated on a round rose with an approximate diameter of 52 mm.
The circular mounting base complements the flowing leaf-shaped lever.
8. Compact Rose Profile
The reference rose thickness is approximately 10 mm.
The actual decorative cover and internal mounting structure must be confirmed.
9. Square Spindle Connection
The drawing illustrates an approximately 8 × 8 mm square spindle.
The final spindle size, length, and lock compatibility must be verified.
10. Matching Keyhole Escutcheon Design
The reference drawing shows round Euro-profile-style keyhole escutcheons.
Their exact opening profile, dimensions, and inclusion in the standard commercial package must be confirmed.
The preliminary exploded assembly view illustrates:
Two opposing sculpted twisted leaf lever handles
Two round decorative mounting roses
Internal fixing plates
A square spindle
Two round keyhole escutcheons
The final supplied components, fixing screws, spindle length, and packing quantities must be confirmed against the approved product configuration.
A mortise lock case or lock cylinder should not be assumed to be included.
| Parameter | Specification |
|---|---|
| Brand | DEGOL |
| Product Model | LH1113 – Verification Pending |
| Product Name | Modern Sculpted Twisted Leaf Door Lever Handle Set |
| Product Category | Architectural Door Hardware |
| Product Type | Lever Handle on Round Rose |
| Lever Design | Sculpted / Twisted / Leaf-Shaped |
| Lever Profile | Narrow Twisted Waist with Fuller Leaf-Shaped Grip |
| Lever Tip | Smooth Rounded Tapered End |
| Design Style | Modern / Contemporary / Decorative |
| Reference Material Examples | Stainless Steel, SUS304 / SUS201 |
| Confirmed Material Grade | Not Verified |
| Reference Surface Finish | Satin / Brushed Silver Appearance |
| Alternative Finish Inquiries | Polished / PVD Black / PVD Gold |
| Reference Lever Length | Approx. 125–130 mm |
| Reference Handle Projection | Approx. 60 mm |
| Reference Maximum Lever Width | Approx. 22 mm |
| Rose Shape | Round |
| Reference Rose Diameter | Approx. Ø52 mm |
| Reference Rose Thickness | Approx. 10 mm |
| Escutcheon Shape | Round |
| Reference Escutcheon Diameter | Approx. Ø52 mm |
| Reference Escutcheon Thickness | Approx. 10 mm |
| Escutcheon Keyhole | Euro Profile Style – Exact Profile TBC |
| Reference Keyhole Cutout | Approx. 17 mm Wide × 33 mm High |
| Reference Mounting-Hole Pitch | Approx. 38 mm |
| Reference Mounting Holes | 2 × Ø5 mm Through |
| Square Spindle | Approx. 8 × 8 mm |
| Reference Door Thickness | Approx. 35–55 mm |
| Handle Configuration | Opposing Pair Illustrated |
| Escutcheon Inclusion | Illustrated; Standard Supply TBC |
| Spring Mechanism | Not Verified |
| Lock Compatibility | Subject to Selected Lock System |
| Installation Type | Door Mounted |
| Main Applications | Residential / Hotel / Office / Commercial Interior |
| OEM / ODM | Available for Inquiry |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Specification Notice: All dimensions are preliminary reference values based on comparable DEGOL LH1103 information and common market data. The actual LH1113 material, manufacturing construction, finish, dimensions, spindle configuration, mounting-hole pattern, and lock compatibility have not been independently verified. Final specifications must be confirmed using approved technical drawings or physical samples.
The preliminary LH1113 engineering reference drawing illustrates the sculpted twisted leaf door lever handle set through multiple views, including:
Front view of the assembled opposing levers
Side view of a single lever
Top view of a single lever
Round mounting rose detail
Euro-profile-style escutcheon detail
Cross-section of the lever and mounting rose
Exploded assembly view
Mounting-hole location diagram
Keyhole cutout diagram
Reference specification table
These views provide a preliminary understanding of the sculpted leaf-shaped lever geometry, circular mounting base, internal fixing arrangement, and possible lock accessory configuration.
The reference drawing indicates an approximate lever length of 125–130 mm.
The illustrated handle extends outward from the mounting neck and develops into a fuller leaf-shaped gripping section.
The actual production length and measurement datum must be confirmed.
The side view indicates an approximate handle projection of 60 mm.
This dimension is relevant when evaluating installed hand clearance and the space required between the lever and surrounding door components.
The final projection must be verified using the approved assembly.
The reference drawing identifies an approximate maximum lever width of 22 mm.
Because the LH1113 has a sculpted, changing profile, its width varies along the gripping section.
This value should not be interpreted as a uniform tubular diameter.
The front and top views illustrate a flowing lever profile with a narrow inner transition and fuller outer gripping section.
The handle appears to twist gently between the mounting neck and leaf-shaped outer end.
The actual twist angle, curvature, cross-sectional geometry, and edge radii must be verified.
The illustrated mounting rose has a reference diameter of approximately 52 mm.
Its circular design complements the smooth sculpted lever.
The reference drawing indicates a rose thickness of approximately 10 mm.
The actual decorative cover, internal fixing plate, and installed thickness must be confirmed.
The matching round keyhole escutcheon is illustrated with an approximate diameter of 52 mm.
This creates a coordinated appearance with the lever's round mounting rose.
The reference escutcheon thickness is approximately 10 mm.
The final dimension depends on the approved escutcheon design.
The drawing illustrates a keyhole cutout with approximate dimensions of:
Width: 17 mm
Height: 33 mm
These are preliminary reference dimensions.
The exact opening geometry and compatibility with a Euro profile cylinder must be verified before ordering or installation.
The reference mounting-hole diagram indicates a pitch of approximately 38 mm.
This measurement is shown between two mounting holes on the rose fixing arrangement.
The final mounting-hole spacing must be confirmed against the actual product.
The reference diagram identifies two through-holes with an approximate diameter of 5 mm.
These are preliminary reference features and must not be used as final drilling specifications.
The exploded assembly illustration shows an approximately 8 × 8 mm square spindle.
The spindle transfers rotational movement from the lever to a compatible latch or lock mechanism.
The final spindle dimensions, length, and engagement requirements must be confirmed.
The reference specification indicates an approximate compatible door thickness range of 35–55 mm.
Actual suitability depends on the selected spindle, fixing system, door construction, and lock mechanism.
The reference cross-section illustrates a decorative rose cover, internal mounting base, and sculpted lever section.
This provides a general indication of the mounting structure.
However, it does not establish the final manufacturing process, internal dimensions, or fixing hardware specifications.
The preliminary exploded illustration shows:
Sculpted leaf-shaped lever assemblies
Decorative round rose covers
Internal mounting plates
Square spindle
Matching round keyhole escutcheons
The final commercial packing list must be confirmed separately.
| Component | Reference Dimension |
|---|---|
| Lever Length | Approx. 125–130 mm |
| Handle Projection | Approx. 60 mm |
| Maximum Lever Width | Approx. 22 mm |
| Lever Profile | Sculpted Twisted Leaf Shape |
| Rose Diameter | Approx. Ø52 mm |
| Rose Thickness | Approx. 10 mm |
| Escutcheon Diameter | Approx. Ø52 mm |
| Escutcheon Thickness | Approx. 10 mm |
| Keyhole Cutout Width | Approx. 17 mm |
| Keyhole Cutout Height | Approx. 33 mm |
| Mounting-Hole Pitch | Approx. 38 mm |
| Mounting Holes | 2 × Ø5 mm Through |
| Square Spindle | Approx. 8 × 8 mm |
| Door Thickness | Approx. 35–55 mm |
| Lever Cross-Section | Exact Dimensions TBC |
Technical Drawing Disclaimer: The supplied drawing is a preliminary engineering reference based on comparable DEGOL LH1103 data. It is not an approved LH1113 manufacturing drawing or drilling template. All critical dimensions, mounting-hole locations, keyhole dimensions, tolerances, and component specifications must be verified using approved manufacturer documentation or physical samples.
The LH1113 reference drawing identifies stainless steel as a typical material category and lists SUS304 and SUS201 as examples.
However, the actual LH1113 base material, construction, and material grade have not been independently verified.
The preliminary drawing should not be interpreted as confirmation that the product is manufactured from SUS304, SUS201, or another specific stainless steel grade.
Customers requiring a particular material should request written confirmation from DEGOL before ordering.
The reference illustration shows a satin brushed silver metallic appearance.
The subdued reflective surface highlights the flowing contours of the sculpted leaf-shaped lever.
The twisted transition and fuller outer grip create changing reflections across the handle surface.
This appearance can coordinate with modern wooden doors, painted interior doors, metal door frames, and other silver-toned architectural fittings.
The actual surface treatment process must be confirmed.
Customers may inquire about polished metallic finishes for architectural projects requiring a brighter reflective appearance.
Availability depends on the approved material and manufacturing process.
The reference specification mentions PVD black as an example of a possible finish category.
This should be treated as a customization inquiry rather than a confirmed standard LH1113 finish.
Customers should request confirmation of coating availability, specifications, and performance requirements.
PVD gold is another finish category mentioned in the reference information.
Actual PVD gold availability, color, coating process, and durability requirements must be confirmed with DEGOL.
The LH1113 design features smoothly blended surfaces and a gently twisted lever profile.
The quality of the finished appearance depends on the consistency of the curves, surface treatment, and edge finishing.
Actual surface quality should be evaluated using approved product samples.
Customers may request evaluation of:
Satin Silver
Brushed Stainless Steel Appearance
Polished Silver
Satin Nickel Appearance
Matte Black
PVD Black
Brushed Gold
PVD Gold
Champagne Gold
Customized Decorative Finishes
These are potential customization requests, not confirmed standard LH1113 variants.
When specifying LH1113, buyers should evaluate:
Required base material
Material grade
Surface finish process
Intended installation environment
Corrosion resistance requirements
Surface durability expectations
Cleaning and maintenance requirements
Door usage frequency
Applicable performance standards
Cleaning procedures should follow the final confirmed material and surface treatment specifications.
A soft cloth and an appropriate mild cleaning solution are generally preferred for decorative architectural metal hardware.
Avoid abrasive cleaning materials and aggressive chemicals that may damage the finish.
The DEGOL LH1113 Sculpted Twisted Leaf Door Lever Handle Set can be considered for modern residential and commercial interior architectural projects.
Its flowing three-dimensional profile offers a distinctive alternative to conventional straight tubular and flat rectangular lever handles.
The LH1113 can be considered for compatible bedroom doors, study doors, living area doors, and other interior swing doors.
The sculpted leaf-shaped design can complement modern apartment and condominium interiors.
The decorative twisted lever profile can provide a distinctive architectural accent for contemporary residential spaces.
The flowing leaf-shaped design can coordinate with modern hospitality interiors.
Suitability for guestroom doors depends on the selected locking system and applicable security, durability, and project requirements.
The satin silver reference appearance can complement office interiors, meeting rooms, administrative spaces, and compatible workplace doors.
The LH1113 may be considered for commercial interior applications where the final product meets the relevant installation and performance requirements.
The sculpted lever can be considered for projects requiring decorative yet contemporary door hardware.
The twisted leaf-shaped silhouette offers a recognizable style for architectural hardware wholesalers and distributors.
Door manufacturers may evaluate LH1113 for integration with compatible door leaves, latches, mortise locks, and mounting systems.
International hardware brands may inquire about the LH1113 design for private-label decorative door hardware collections.
The LH1113 is intended for consideration with compatible hinged doors using a suitable lever-operated latch or locking mechanism.
| Door Type | Application Consideration |
|---|---|
| Wooden Interior Doors | Suitable subject to mounting and lock compatibility |
| MDF Interior Doors | Subject to door construction and fixing requirements |
| Composite Interior Doors | Subject to approved installation specifications |
| Residential Bedroom Doors | Compatible latch mechanism required |
| Apartment Interior Doors | Suitable for evaluation |
| Office Interior Doors | Suitable for evaluation |
| Hotel Guestroom Doors | Subject to security and performance requirements |
| Commercial Interior Doors | Subject to project specifications |
| Metal Interior Doors | Appropriate mounting preparation required |
| Exterior Entrance Doors | Material and environmental suitability must be verified |
| Fire-Rated Doors | Appropriate certification and assembly approval required |
| Frameless Glass Doors | Direct mounting compatibility not established |
| Sliding Doors | Not intended as a conventional sliding-door pull |
Before selecting LH1113, customers should verify:
Door construction and material
Actual door thickness
Spindle size and length
Compatible latch or mortise lock
Round rose mounting structure
Mounting-hole spacing
Fixing screw requirements
Handle handing or reversibility
Required operating clearance
Escutcheon and cylinder compatibility
Relevant building and safety requirements
The product should not be represented as approved for fire-rated doors, emergency-exit systems, or security-rated assemblies without appropriate supporting documentation.
The following instructions provide a general installation reference for lever-on-round-rose door hardware.
Actual installation must follow the approved LH1113 technical documentation and the selected latch or lock manufacturer's instructions.
Confirm that the door thickness, construction, and selected locking mechanism are compatible with the final LH1113 specifications.
Check the required spindle dimensions and mounting arrangement.
Check the supplied lever handles, round roses, fixing plates, spindle, screws, and other accessories against the approved packing list.
If matching keyhole escutcheons are required, confirm their inclusion and compatibility.
Review the intended orientation of the twisted leaf-shaped lever.
Check whether the final product is reversible or requires a specific left- or right-handed configuration.
Mark the spindle opening and required mounting holes using approved installation drawings.
Do not use the preliminary reference drawing as a drilling template.
Install the compatible latch or mortise lock according to the lock manufacturer's instructions.
Verify that the mechanism operates correctly before fitting the handles.
Insert the approved spindle through the lock follower.
Confirm that the spindle length and engagement are suitable for the door thickness and handle assembly.
Place the LH1113 lever assemblies on the appropriate sides of the door.
Check the alignment and orientation of the sculpted leaf-shaped gripping sections.
Attach the internal fixing components using the specified mounting system.
Install the decorative round rose covers where included.
Avoid overtightening screws or damaging the decorative surface.
If compatible round Euro-profile-style escutcheons are included in the approved product configuration, install them according to their instructions.
Confirm the selected lock cylinder and keyhole opening compatibility.
Operate the handles repeatedly and verify:
Smooth lever movement
Correct latch retraction
Secure rose mounting
Proper handle alignment
Suitable hand clearance
No interference with surrounding door components
Appropriate lever return where specified
Correct locking operation where applicable
The final spindle, mounting-hole spacing, fixing screws, keyhole dimensions, lock compatibility, and door thickness range must be confirmed before installation.
Professional installation is recommended where required by the project.
The LH1113 features a fuller leaf-shaped gripping section that creates a recognizable architectural silhouette.
The gently twisted connecting section adds visual depth and distinguishes the handle from conventional straight lever designs.
The sculpted lever features continuous curved transitions between the mounting neck and outer grip.
The leaf-shaped outer portion creates a distinctive profile compared with narrow straight-bar handles.
The combination of organic curves and a compact round mounting rose complements modern interior design schemes.
The illustrated metallic appearance coordinates with a wide range of contemporary door colors and architectural fittings.
The approximately Ø52 mm reference rose provides a balanced circular mounting appearance.
The illustrated round keyhole escutcheons can create a coordinated appearance when compatible components are confirmed.
The LH1113 profile differs visually from straight tubular, flat rectangular, slim tapered, and conventional wave-shaped lever handles.
The design can be considered for residential, apartment, hotel, office, and compatible commercial interior projects.
The sculpted twisted leaf silhouette offers a differentiated style for architectural hardware distributors and door handle wholesalers.
Customers may inquire about customized materials, finishes, lever dimensions, branding, and packaging.
Jiangmen Degol Hardware Co., Ltd. welcomes OEM and ODM inquiries for contemporary architectural door hardware, including sculpted twisted leaf lever handle designs such as LH1113.
International customers can submit product drawings, samples, material requirements, finish specifications, and packaging instructions for technical evaluation.
Potential private-label requirements include:
Customer brand identification
Custom product model codes
Branded product labels
Private-label packaging
Barcode stickers
Customized installation instructions
Export carton markings
Branding methods and availability depend on the approved product configuration.
Customers may request evaluation of specific base materials or material grades.
Material selection must consider the twisted leaf geometry, manufacturing method, required finish, and intended application.
Buyers may submit finish samples, color references, or decorative treatment requirements.
Actual availability depends on material compatibility, manufacturing feasibility, and order quantity.
Potential design and dimensional requests include:
Lever length
Maximum grip width
Twisted connecting profile
Leaf-shaped gripping geometry
Outer tip thickness
Edge radii
Handle projection
Connecting neck dimensions
Rose diameter
Rose thickness
Design modifications may require revised engineering drawings, tooling, and sample approval.
Customers may discuss mounting rose dimensions, decorative cover designs, and fixing arrangements.
All changes must be compatible with the approved door construction and lock mechanism.
Customers may inquire about matching Euro-profile-style escutcheons and other coordinated door hardware accessories.
The final keyhole dimensions, cylinder compatibility, and finish must be confirmed.
Potential packaging requirements include:
Private-label product boxes
Protective internal packaging
Branded labels
Barcode identification
Printed installation instructions
Customized export cartons
Customers may provide architectural drawings, door schedules, finish requirements, product samples, and estimated purchasing quantities.
Where available, samples can be requested to verify the product's appearance, dimensions, material, finish, and installation compatibility before bulk purchasing.
OEM / ODM Notice: All customization requests are subject to technical feasibility, material availability, tooling requirements, MOQ, sample approval, production capacity, and agreed lead times.
| Item | Information |
|---|---|
| Product Model | LH1113 |
| Brand | DEGOL |
| Product Name | Modern Sculpted Twisted Leaf Door Lever Handle Set on Round Rose |
| Main Material | To Be Confirmed |
| Material Grade | Not Verified |
| Reference Finish | Satin / Brushed Silver Appearance |
| Lever Handles | Opposing Pair Illustrated; Supply Quantity TBC |
| Round Roses | Illustrated; Final Quantity TBC |
| Internal Mounting Plates | Illustrated; Final Supply TBC |
| Square Spindle | Approx. 8 × 8 mm Reference; Final Specification TBC |
| Spindle Length | To Be Confirmed |
| Fixing Screws | Subject to Confirmed Packing List |
| Round Keyhole Escutcheons | Pair Illustrated; Inclusion TBC |
| Escutcheon Profile | Euro Profile Style; Compatibility TBC |
| Lock Case | Not Confirmed as Included |
| Lock Cylinder | Not Confirmed as Included |
| MOQ | Subject to Quotation |
| Sample Availability | On Request |
| OEM Packaging | Subject to Confirmation |
| Production Lead Time | Subject to Order Confirmation |
| Payment Terms | To Be Negotiated |
| Shipping Terms | Subject to Quotation |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Step 1 – Submit Product Inquiry
Provide DEGOL with model LH1113, required quantity, destination country, and preferred product specifications.
Step 2 – Confirm Technical Specifications
Verify the material, surface finish, lever dimensions, rose size, spindle, mounting-hole pattern, and lock compatibility.
Step 3 – Request Samples
Contact DEGOL regarding sample availability, pricing, and shipping arrangements.
Step 4 – Confirm OEM / ODM Requirements
Submit branding artwork, finish references, packaging requirements, or custom drawings where applicable.
Step 5 – Review Wholesale Quotation
Confirm unit pricing, MOQ, packaging details, payment terms, production lead time, and delivery conditions.
Step 6 – Approve Product Configuration
Review the approved technical specifications, physical sample where required, and final packing list before bulk production.
Step 7 – Arrange Production and Shipment
Production, inspection, packaging, and export arrangements follow the confirmed purchase order and agreed commercial terms.
Product Model: LH1113
Required Order Quantity
Preferred Material Grade
Required Surface Finish
Door Thickness
Lock and Spindle Requirements
Escutcheon Requirements
Packaging Requirements
OEM / ODM Requirements
Destination Country
Expected Delivery Schedule
Jiangmen Degol Hardware Co., Ltd. is a China-based architectural hardware company serving international customers with door hardware and related architectural fittings.
The company welcomes international sourcing inquiries for modern door handles, locking hardware, architectural accessories, and customized hardware products.
DEGOL's architectural hardware offering includes categories such as:
Modern door lever handles
Sculpted leaf-shaped door handles
Twisted and curved lever handle designs
Round rose lever handles
Square rose lever handles
Decorative door handle designs
Door escutcheons
Door locks and mortise lock bodies
Door hinges
Architectural door accessories
Specific model availability must be confirmed with DEGOL.
DEGOL welcomes product development inquiries based on customer drawings, reference samples, dimensions, and architectural project specifications.
Customers may discuss design modifications and custom product configurations.
The manufacturing process for architectural door hardware depends on the selected material, product geometry, component construction, and approved technical requirements.
The actual LH1113 production process must be confirmed before making claims about casting, forging, machining, or solid construction.
Customers may inquire about decorative surface treatment options and project-specific finish requirements.
The available processes depend on the approved base material and manufacturing feasibility.
The preliminary LH1113 illustration shows a lever-and-rose assembly with mounting plates, a square spindle, and matching round keyhole escutcheons.
The final product structure and supplied components must be confirmed using approved documentation.
Buyers may request information about inspection procedures covering dimensions, surface appearance, assembly, and functional performance.
Specific LH1113 test results, certifications, and inspection standards must be verified separately.
DEGOL welcomes international hardware supply inquiries involving standard packaging, private-label packaging, and export arrangements.
Final packaging specifications depend on the approved product configuration and confirmed order.
International customers may submit requirements involving:
Custom lever designs
Material specifications
Surface finish requirements
Dimensional modifications
Private-label branding
Customized packaging
Project-specific hardware configurations
DEGOL welcomes inquiries from:
Architectural hardware importers
Door handle wholesalers
Regional hardware distributors
Door manufacturers
Building material suppliers
Construction contractors
Hotel project purchasing teams
International hardware brands
OEM / ODM customers
For LH1113, buyers may request:
Verified product technical drawings
Material specifications
Available decorative finishes
Lever dimensions
Round rose details
Spindle and lock compatibility
Mounting-hole specifications
Matching escutcheon options
Sample information
Packaging specifications
Wholesale quotations
Factory Capability Notice: General company and product information should not be interpreted as confirmation of LH1113-specific production availability, manufacturing capacity, material certifications, performance testing, or approved technical specifications. These details must be confirmed independently.
The DEGOL LH1113 is a modern sculpted twisted leaf door lever handle design featuring a flowing three-dimensional gripping profile, a fuller leaf-shaped outer section, and a round mounting rose.
Its defining feature is the sculpted twisted leaf profile, which transitions from a narrower connecting section into a fuller leaf-shaped outer grip.
The illustrated lever features a gently twisted connecting section and a broad leaf-shaped gripping profile. These design elements create a flowing, organic appearance.
Yes. The supplied reference drawing illustrates the sculpted leaf-shaped lever mounted on a circular rose.
The illustrated design features a contemporary decorative style with smooth organic curves and a sculpted metallic appearance.
The reference specification identifies stainless steel as a typical material category, but the actual LH1113 base material has not been independently verified.
SUS304 is listed as an example in the reference specification, but it has not been confirmed for LH1113.
Customers requiring SUS304 should request written material confirmation.
SUS201 is also mentioned as a material example in the reference drawing.
Actual availability must be confirmed with DEGOL.
The reference illustration shows a satin brushed silver metallic appearance.
The actual production finish must be confirmed.
Customers may inquire about black and gold finish options, including PVD finishes.
Availability and finishing specifications must be confirmed before ordering.
The supplied reference drawing indicates an approximate lever length of 125–130 mm.
This is a reference dimension, not a verified production specification.
The reference handle projection is approximately 60 mm.
The actual installed projection must be verified.
The reference maximum lever width is approximately 22 mm.
The width varies along the sculpted leaf-shaped gripping section.
The reference round rose diameter is approximately 52 mm.
The reference rose thickness is approximately 10 mm.
The exploded assembly view illustrates two round Euro-profile-style keyhole escutcheons.
Their inclusion in the standard commercial package has not been confirmed.
The reference escutcheon diameter is approximately 52 mm.
The reference escutcheon thickness is approximately 10 mm.
The drawing indicates an approximate keyhole cutout width of 17 mm and height of 33 mm.
The exact profile and cylinder compatibility must be confirmed.
The drawing illustrates an approximately 8 × 8 mm square spindle.
The actual spindle dimensions and length must be confirmed.
The reference specification indicates an approximate door thickness range of 35–55 mm.
Actual compatibility depends on the final spindle, fixing system, lock mechanism, and door construction.
The reference drawing indicates an approximate mounting-hole pitch of 38 mm.
This dimension must be verified before drilling or installation.
The reference mounting-hole diagram identifies two through-holes of approximately 5 mm diameter.
The final fixing arrangement must be confirmed.
LH1113 may be considered for compatible wooden interior doors when the mounting arrangement and selected lock mechanism are suitable.
The modern sculpted design can be considered for hotel, office, and commercial interior projects.
Suitability depends on the required security, durability, locking, and installation specifications.
Exterior suitability has not been confirmed.
Customers should verify material grade, corrosion resistance, finish durability, and environmental exposure requirements.
No LH1113 fire-rating documentation has been provided.
Use in a fire-rated door assembly requires appropriate certification and confirmation of assembly compatibility.
Emergency-exit suitability has not been established.
The handle should not be specified for such applications without confirmation of the applicable hardware standards and approvals.
The reference drawing does not verify an internal return spring.
Customers should request confirmation of the actual mechanism.
The drawing illustrates opposing lever assemblies, but universal reversibility has not been verified.
Handing and orientation requirements should be confirmed before ordering.
The preliminary drawing does not establish that a mortise lock case or lock cylinder is included.
The final packing list should identify all supplied components.
Customers may inquire about alternative decorative finishes.
Availability depends on material compatibility, manufacturing feasibility, and order requirements.
DEGOL welcomes OEM inquiries involving private-label branding, product identification, labels, and customized packaging.
Customers may submit design modification requests for technical evaluation.
Potential changes include lever length, twist geometry, grip width, outer tip profile, projection, and rose dimensions.
Design changes may require revised drawings, tooling, and sample approval.
Customers can contact DEGOL to inquire about sample availability, sample pricing, and shipping arrangements.
The confirmed LH1113 minimum order quantity has not been provided.
MOQ should be requested according to the material, finish, configuration, and packaging requirements.
Buyers may request approved drawings and verified dimensional specifications.
The preliminary engineering reference should not be used as a manufacturing or drilling drawing.
The illustrated LH1113 features a fuller sculpted leaf-shaped grip with a twisted connecting profile.
The earlier LH1112 reference features a slimmer, more uniformly tapered curved lever.
The LH1113 reference drawing also indicates a longer 125–130 mm lever length and larger Ø52 mm rose, compared with the LH1112 reference dimensions of 110 mm and Ø48 mm.
These differences must be verified against actual product samples before being presented as final specifications.
The LH1113 illustration emphasizes a fuller leaf-shaped outer grip and a twisted transition near the mounting neck.
The earlier LH1111 illustration emphasizes a slimmer curved blade profile with a more elongated tapered tip.
Their silhouettes and gripping profiles are visually different.
The supplied LH1113 reference drawing identifies DEGOL LH1103 as a comparable model used for dimensional reference.
This does not establish that LH1113 and LH1103 are identical products or share verified production specifications.
DEGOL welcomes wholesale inquiries from architectural hardware importers, distributors, door manufacturers, contractors, and professional purchasing teams.
Contact DEGOL Hardware via WhatsApp at +86 13725946499 or email info@degolhardware.com.
Provide model LH1113, required quantity, preferred material, surface finish, door thickness, lock requirements, escutcheon requirements, packaging preferences, and destination country to request a wholesale quotation.
Looking for an LH1113 modern sculpted twisted leaf lever handle with round rose and matching Euro-profile-style keyhole escutcheon options for your architectural door hardware range?
Contact DEGOL Hardware for product specifications, approved technical drawings, available finishes, matching escutcheon options, sample information and wholesale pricing.
Product Model: LH1113
Product Name: LH1113 Modern Sculpted Twisted Leaf Door Lever Handle Set on Round Rose
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your LH1113 Sculpted Twisted Leaf Door Lever Handle Set Wholesale Quote Today
