Test steelThe load-bearing capacity of the drawer mainly depends on the quality of the steel of the track. The thickness of the steel of different specifications of the drawer is different, and the load-bearing capacity is also different. When purchasing, you can pull out the drawer and press the dr

1. Remove the drawer from the cabinetThis is one time when you don’t want to estimate – accuracy is key. Removing the drawer may require some manipulating. Most drawers will require that you fully extend the drawer, then lift up and it will come right out. If that doesn’t work, guide the drawer so i

Align the smaller slide against the bottom of the drawer. Lay the drawer on its side. The slide needs to be flush against the drawer’s bottom edge. The slide’s thicker, squared end should be flush with the drawer’s front edge.

DEGOL TELL YOU : HOW TO MEASURE DRAWER SLIDES FOR A SEAMLESS INSTALLATION1. Remove the drawer from the cabinetThis is one time when you don’t want to estimate – accuracy is key. Removing the drawer may require some manipulating. Most drawers will require that you fully extend the drawer, then lift u