 |
SP1012
Degol
| Quantity: | |
|---|---|
SP1012 – Stainless Steel Rectangular Door Push Plate 300x100mm with PUSH Lettering for Commercial Doors
| Product Attribute | Specification |
|---|---|
| Model Number | SP1012 |
| Product Type | Door Push Plate |
| Plate Dimensions | 300 × 100 × 2 mm |
| Fixing Hole Diameter | Ø6.5 mm |
| Number of Fixing Holes | 6 |
| Fixing Screw Reference | M5 or ST5.5 |
| Installation Type | Surface Mounted |
Note: All dimensions are based on the supplied SP1012 engineering drawing. Final material grade, surface finish, marking method, fixing hardware and included accessories should be confirmed before ordering.
PRODUCT INTRODUCTION
The DEGOL SP1012 Stainless Steel Rectangular Door Push Plate combines a minimalist flat-plate design with practical door surface protection, making it a suitable architectural hardware option for residential, hospitality and commercial interior doors.
Featuring a 300 × 100 mm rectangular stainless steel plate, the SP1012 is designed for installation on the push side of a compatible door. Its smooth surface provides a designated contact area for users when opening the door, helping reduce direct hand contact with the door finish.
The plate features clearly visible PUSH lettering near the lower section, providing a simple visual indication of the intended door-opening direction.
With a 2 mm plate thickness and six Ø6.5 mm fixing holes, the SP1012 offers a straightforward surface-mounted configuration for compatible wooden and metal doors.
Its clean rectangular appearance complements contemporary architectural interiors, including office buildings, hotels, apartments, schools and commercial facilities.
Stainless steel construction makes the SP1012 a practical choice for architectural door hardware collections. Buyers can discuss the appropriate material grade and surface finish according to their project requirements.
As an architectural hardware manufacturer and export supplier, DEGOL welcomes inquiries from international wholesalers, importers, distributors and construction project buyers seeking stainless steel door push plates for bulk purchasing and OEM/ODM cooperation.
Key Product Features:
Modern rectangular stainless steel push plate design.
300 × 100 mm plate dimensions.
2 mm plate thickness.
Visible PUSH lettering for door-opening direction identification.
Six Ø6.5 mm fixing holes for surface-mounted installation.
Smooth flat surface for convenient manual pushing.
Helps protect the covered door surface from direct hand contact.
Suitable for compatible residential, hotel and commercial interior doors.
OEM/ODM customization and wholesale purchasing inquiries welcomed.
APPLICATIONS
The SP1012 Stainless Steel Door Push Plate can be considered for architectural door hardware applications requiring a designated pushing surface, clear directional identification and a coordinated stainless steel appearance.
Office Buildings and Commercial Interiors
Suitable for office entrance doors, meeting rooms, administrative areas and commercial interior doors where push plates are specified.
Hotels and Hospitality Projects
A practical option for hotel corridors, service areas, staff entrances and hospitality interior doors requiring coordinated architectural hardware.
Residential Buildings and Apartments
Suitable for selected apartment common areas, residential building entrances and interior doors where a surface-mounted push plate is appropriate.
Schools and Educational Facilities
Can be considered for classroom entrances, administrative rooms and other educational interior door installations, subject to project requirements.
Healthcare and Public Facilities
An option for selected public-area and facility doors where a push plate configuration is appropriate. Any hygiene, accessibility or performance requirements must be evaluated separately.
Wholesale and Hardware Distribution
A relevant product for architectural hardware wholesalers, building material distributors, door hardware importers and professional hardware retailers seeking stainless steel push plate products.
The SP1012 is particularly relevant to international wholesale and construction sourcing inquiries from South American markets, including Brazil, Chile, Peru, Colombia and Argentina.
For fire-rated, security-rated or other regulated door assemblies, buyers should confirm the applicable installation and compliance requirements before selecting the product.
SUITABLE DOOR TYPES
The DEGOL SP1012 Rectangular Stainless Steel Push Plate can be considered for a variety of compatible door constructions and applications.
Wooden Interior Doors
Suitable for compatible residential, hotel, office and commercial wooden door installations.
Solid Timber Doors
Applicable where the door construction provides sufficient support for the selected surface-mounted fixing system.
Metal Doors
Can be considered for metal doors using appropriate fixing screws, prepared mounting holes or suitable reinforcement where required.
Laminate and Composite Doors
Suitable for selected laminate-faced and composite doors where the substrate and mounting system provide adequate fixing support.
Office and Commercial Doors
A practical push-side hardware option for compatible office, administrative and commercial interior doors.
Hotel and Public-Area Doors
Suitable for selected hospitality and public-area door installations where the required mounting and operational specifications are met.
Door Compatibility Note:
The SP1012 is a fixed, surface-mounted push plate rather than a lever handle or pull handle.
It does not operate a door latch or locking mechanism.
The supplied engineering drawing does not specify a door thickness range. Buyers should verify the door material, available fixing depth, screw selection and mounting requirements before installation.
For South American construction projects, compatibility with locally specified door assemblies and applicable building requirements should be confirmed in advance.
TECHNICAL DRAWINGS & INSTALLATION COMPATIBILITY
The DEGOL SP1012 Stainless Steel Door Push Plate features a flat rectangular design with six fixing holes and clearly visible PUSH lettering.
Key Engineering Dimensions
Plate Height: 300 mm.
Plate Width: 100 mm.
Plate Thickness: 2 mm.
Fixing Hole Diameter: Ø6.5 mm.
Number of Fixing Holes: 6.
Fixing Screw Reference: M5 or ST5.5.
Dimensional Tolerances
According to the supplied engineering drawing:
Plate Height Tolerance: ±1.0 mm.
Plate Width Tolerance: ±0.5 mm.
Plate Thickness Tolerance: ±0.1 mm.
Fixing Hole Diameter Tolerance: ±0.2 mm.
Rectangular Plate Design
The SP1012 features a 300 × 100 mm flat rectangular plate with slightly rounded corners.
The plate incorporates six fixing holes positioned along the two vertical sides, with two holes near the top, two near the middle and two near the bottom.
This arrangement provides multiple fixing positions for the specified surface-mounted installation.
The exact fixing hole centre distances should be verified against the approved technical drawing before preparing the door.
PUSH Lettering
The front surface includes visible PUSH lettering near the lower section of the plate.
The lettering provides a clear indication of the intended pushing direction.
The marking method, appearance and any available customization options should be confirmed with DEGOL before ordering.
Fixing Requirements
The reference engineering drawing specifies:
Fixing Hole Diameter: Ø6.5 mm.
Fixing Screws: M5 or ST5.5, depending on the mounting arrangement.
Number of Screws: 6 pieces, as illustrated.
The appropriate screw type, length and fixing method depend on the door material and installation requirements.
Lock and Door Hardware Compatibility
The SP1012 does not require a lever spindle, mortise lock or Euro profile cylinder for its own operation.
It can be installed on the push side of a compatible door alongside separately selected door closers, pull handles, locks or other architectural hardware.
Buyers should verify the available mounting space and ensure the push plate does not interfere with existing hardware.
Surface Finish Options
The supplied engineering reference illustrates the following stainless steel finishes:
SSS: Satin Stainless Steel – Brushed Silver.
PSS: Polished Stainless Steel – Mirror Silver.
PVD-GD: PVD Gold.
PVD-BK: PVD Black.
Available finishes and minimum order requirements for SP1012 should be confirmed with DEGOL before ordering.
Material Selection
The supplied engineering reference includes a comparison of stainless steel grades 304 and 201.
Stainless Steel 304: Generally offers better corrosion resistance and is often preferred for applications requiring greater environmental resistance.
Stainless Steel 201: Can provide a cost-effective material option for suitable indoor applications.
Buyers should confirm the available material grade and required environmental performance according to their intended application.
Technical Note:
All measurements are based on the supplied SP1012 engineering drawing. Final production specifications, fixing hole positions, surface finish, marking details and included accessories should be confirmed against approved product documentation.
INSTALLATION GUIDE
The SP1012 Stainless Steel Door Push Plate is intended for surface-mounted installation on compatible doors using an appropriate fixing system.
The following steps provide general installation guidance.
Step 1: Check Door Compatibility
Confirm that the door material and construction are suitable for the selected surface-mounted fixing method.
Ensure that sufficient mounting space is available on the push side of the door.
Step 2: Determine the Installation Position
Position the SP1012 push plate at the required operating height and location according to the project specifications.
Ensure the PUSH lettering remains visible and the plate does not interfere with other door hardware.
Step 3: Mark the Fixing Holes
Place the plate against the door surface and mark the six fixing positions according to the approved installation drawing.
Check that the plate is correctly aligned before preparing the holes.
Step 4: Prepare the Door
Prepare the fixing holes using suitable tools and procedures for the door material.
Select the appropriate drilling method and fixing components according to the door construction.
Step 5: Position the Push Plate
Place the SP1012 against the prepared door surface and align the fixing holes.
Ensure that the plate sits flat against the door.
Step 6: Secure the Plate
Fasten the plate using the approved fixing system.
The reference drawing identifies M5 or ST5.5 screw options and six fixing positions.
Select the appropriate screw type and length for the door construction.
Step 7: Check the Installation
Confirm that the plate is securely mounted and that all fixing components are properly tightened.
Check that the plate has no sharp exposed edges and that the door operates without interference.
Installation Note:
Installation methods may vary according to the door material and fixing arrangement.
The exact fixing screws and included accessories should be confirmed before ordering.
For fire-rated or other regulated door assemblies, installation must comply with the applicable door manufacturer's instructions and certification requirements.
FACTORY CAPABILITY
DEGOL Hardware – Professional Architectural Door Hardware Manufacturer
Jiangmen Degol Hardware Co., Ltd. is a China-based hardware manufacturer and export supplier providing architectural hardware solutions for international importers, wholesalers, distributors and construction project buyers.
DEGOL supplies door hardware, glass hardware, furniture hardware, window hardware and related products for residential and commercial applications.
Manufacturing and Product Supply
DEGOL's manufacturing and supply operations cover product development, production, assembly, quality control, packaging and export coordination.
The company supports wholesale hardware sourcing and project-based purchasing requirements for international customers.
OEM & ODM Customization
DEGOL welcomes OEM and ODM inquiries from architectural hardware wholesalers, distributors and private-label customers.
Depending on product specifications and manufacturing feasibility, customization inquiries may include:
Custom logos and private-label branding.
Alternative stainless steel surface finishes.
Customized plate dimensions and fixing hole arrangements.
Customized lettering or surface marking requirements.
Customized packaging and carton labeling.
Product development based on customer drawings or samples.
All customization requirements are subject to technical review and commercial confirmation.
Quality Control
DEGOL incorporates quality control into its manufacturing and supply processes, with attention to material requirements, dimensional consistency, product appearance, assembly and packaging.
Customers may request available technical specifications, material information and relevant quality documentation before confirming wholesale orders.
International Wholesale Supply
DEGOL welcomes long-term cooperation with architectural hardware importers, building material wholesalers, distributors and construction contractors.
The company supports international B2B sourcing inquiries, including customers supplying stainless steel door hardware to South American residential, hospitality and commercial construction markets.
PACKAGING & EXPORT INFORMATION
DEGOL provides wholesale purchasing and export support for international customers interested in the SP1012 stainless steel door push plate.
Product Packaging
Packaging arrangements can be discussed according to the selected product configuration, order quantity and customer requirements.
Available packaging inquiries may include:
Protective individual product packaging.
Surface protection during transportation.
Retail boxes and master cartons.
Custom logo and private-label packaging.
Product labels and carton markings.
Export carton and palletizing requirements.
Wholesale Orders
Customers can contact DEGOL to confirm the applicable minimum order quantity, sample availability, wholesale pricing and estimated production lead time.
Export and Shipping
DEGOL welcomes international shipment inquiries and can discuss export arrangements according to the destination country, order quantity and shipping requirements.
Customers may request quotations based on applicable trading terms, including FOB or CIF, subject to commercial confirmation.
Information Required for an Accurate Quotation:
Product Model: SP1012.
Required Order Quantity: Specify the requested quantity.
Material Requirements: Confirm the required stainless steel grade.
Preferred Surface Finish: SSS, PSS, PVD Gold, PVD Black or other requested finish.
Product Configuration: Confirm the PUSH lettering and required fixing accessories.
Customization Requirements: Specify any requested logo, marking or dimension changes.
Packaging Requirements: Standard or private-label packaging.
Destination: Country and port.
Preferred Shipping Terms: FOB, CIF or other agreed Incoterms.
Final carton quantities, packing dimensions, shipping arrangements, payment terms and production lead times will be confirmed during the quotation process.
FAQ
Q1: What is the SP1012 stainless steel door push plate used for?
The SP1012 is a rectangular stainless steel plate designed for installation on the push side of compatible doors. It provides a designated pushing surface and helps protect the covered door area from direct hand contact.
Q2: What are the dimensions of the SP1012 door push plate?
The SP1012 measures 300 mm in height, 100 mm in width and 2 mm in thickness. It features six fixing holes with a reference diameter of Ø6.5 mm.
Q3: Does the SP1012 door push plate include PUSH lettering?
The SP1012 reference design features visible PUSH lettering near the lower section of the plate. Buyers should confirm the marking method and any available customization options before ordering.
Q4: How many fixing holes does the SP1012 have?
The SP1012 features six Ø6.5 mm fixing holes. The engineering drawing specifies M5 or ST5.5 screw options, subject to the selected door material and mounting arrangement.
Q5: What types of doors are suitable for the SP1012?
The SP1012 can be considered for compatible wooden, solid timber, metal and selected composite doors. Buyers should confirm the door construction, fixing requirements and installation specifications before ordering.
Q6: Is the SP1012 available in stainless steel 304 or 201?
The engineering reference includes a comparison of stainless steel grades 304 and 201. Customers should contact DEGOL to confirm the available material grades for SP1012 and select the appropriate specification for their intended application.
Q7: What surface finishes are available for SP1012?
The reference drawing illustrates satin brushed stainless steel, polished stainless steel, PVD gold and PVD black. Buyers can contact DEGOL to confirm available finishes and applicable minimum order quantities.
Q8: Can DEGOL provide OEM and ODM customization for SP1012?
Yes. DEGOL welcomes OEM and ODM inquiries. Customers can discuss custom logos, lettering, plate dimensions, surface finishes, packaging and product configuration requirements with the sales team.
Q9: What is the MOQ, and can I request samples before bulk ordering?
The minimum order quantity depends on the selected product specifications and customization requirements. Sample inquiries are welcome. Please contact DEGOL to confirm MOQ, sample availability, applicable charges and wholesale pricing.
Q10: Can DEGOL supply SP1012 stainless steel push plates to South American markets?
DEGOL welcomes wholesale and project inquiries from importers, distributors and contractors serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets. Buyers can provide their order quantity, destination country and preferred shipping terms to discuss export arrangements.
CONTACT DEGOL – REQUEST A WHOLESALE QUOTE
Looking for a stainless steel rectangular door push plate with PUSH lettering for your architectural door hardware range, wholesale distribution business or construction project?
Contact DEGOL Hardware for product specifications, technical drawings, available finishes, sample information, OEM/ODM customization and wholesale pricing.
Product Model: SP1012
Product Name: Stainless Steel Rectangular Door Push Plate 300x100mm with PUSH Lettering for Commercial Doors
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Whether you are an architectural hardware wholesaler, importer, building material distributor or construction project buyer, DEGOL welcomes your product sourcing inquiries.
For faster quotation processing, please provide your required quantity, preferred material grade, surface finish, customization requirements, packaging requirements and destination country.
Request Your SP1012 Stainless Steel Rectangular Door Push Plate Wholesale Quote Today.
