ZLH1050
Degol
| Availability: | |
|---|---|
| Quantity: | |
ZLH1050 – Curved Flat Bar Zinc Alloy Door Lever Handle with Two-Tone Finish and Square Rose for Interior Doors
| Product Attribute | Specification |
|---|---|
| Model Number | ZLH1050 |
| Lever Length (L) | Approx. 132 mm |
| Lever Projection (H) | Approx. 52 mm |
| Maximum Grip Height (h) | Approx. 20 mm |
| Square Rose Size (D) | Approx. 52 × 52 mm |
| Rose Thickness (t) | Approx. 10 mm |
| Square Escutcheon Size (De) | Approx. 52 × 52 mm |
| Escutcheon Thickness (te) | Approx. 8 mm |
| Door Thickness | Approx. 35–55 mm |
| Square Spindle Size | Approx. 8 × 8 mm |
| Fixing Screws | Approx. M4, 2 pcs per side |
| Lock Compatibility | Euro Cylinder / Latch – Verification Required |
Technical Note: All measurements are approximate reference dimensions based on the supplied ZLH1050 engineering drawing. Final production dimensions, tolerances, fixing specifications, lock compatibility and accessory configurations require factory confirmation.
PRODUCT INTRODUCTION
The DEGOL ZLH1050 Curved Flat Bar Zinc Alloy Door Lever Handle with Two-Tone Finish and Square Rose is a contemporary architectural hardware product featuring a gently arched rectangular gripping section, contrasting metallic surface details and a coordinated square mounting rose.
Designed for modern residential, hospitality and selected commercial interior applications, the ZLH1050 combines geometric design with elegant curved styling.
Unlike conventional straight rectangular door handles, the ZLH1050 incorporates a smoothly curved flat bar lever that forms a gentle arch along its length.
The lever extends horizontally from a substantial geometric connecting neck before transitioning into an elongated curved gripping section.
Its broad, flat profile and flowing silhouette create a distinctive architectural appearance that balances straight geometric lines with gentle curves.
One of the most recognizable features of this model is its two-tone metallic appearance, combining satin brushed surfaces with polished reflective accents.
The reference product image shows a brushed metallic upper section complemented by a polished lower surface and decorative connecting components.
This contrast highlights the curvature of the lever and enhances its contemporary styling.
Manufactured from zinc alloy (Zamak), the ZLH1050 is suitable for detailed die-cast architectural hardware designs and decorative metallic finishes.
The supplied engineering drawing indicates an approximate lever length of 132 mm, projection of 52 mm and maximum grip height of 20 mm.
The handle is mounted on an approximately 52 × 52 mm square rose with a thickness of 10 mm, creating a coordinated geometric appearance.
The reference image also illustrates a layered square mounting structure, with an inner decorative square element surrounding the connecting neck.
A matching square Euro profile-style keyhole escutcheon is illustrated, measuring approximately 52 × 52 mm with a thickness of 8 mm.
The reference installation dimensions indicate compatibility with doors approximately 35–55 mm thick, using an 8 × 8 mm square spindle and M4 fixing screws.
All installation specifications require final factory confirmation before project use.
For architectural hardware wholesalers, door hardware importers, building material distributors and construction procurement companies, the ZLH1050 offers a distinctive decorative zinc alloy lever design for modern interior hardware collections.
Distinctive Curved Flat Bar Lever Design
The defining characteristic of the ZLH1050 is its gently arched flat bar gripping section.
Unlike conventional rectangular handles with a completely straight profile, the ZLH1050 features a smooth curve that extends along the length of the lever.
The upper and lower contours create a flowing horizontal silhouette.
The curved profile softens the appearance of the rectangular handle without eliminating its geometric character.
This combination makes the ZLH1050 particularly suitable for contemporary interiors emphasizing both straight lines and subtle curved details.
Elegant Two-Tone Metallic Appearance
The reference ZLH1050 product image illustrates a combination of brushed and polished metallic surfaces.
The upper section of the gripping area features a satin brushed appearance.
The lower curved surface and connecting components incorporate polished reflective details.
This combination creates a visually distinctive two-texture metallic finish.
The polished surfaces emphasize the handle's curvature, while the brushed section provides a softer decorative appearance.
The actual combination of surface treatments should be confirmed using an approved product sample.
Smooth Arched Gripping Profile
The ZLH1050 features a broad, gently curved gripping section.
Its approximate maximum grip height is 20 mm.
Unlike cylindrical lever handles, the ZLH1050 uses a relatively flat gripping profile with defined edges and smoothly changing contours.
The engineering drawing does not provide separate detailed dimensions for the curved grip's full cross-section.
Exact geometry should be confirmed when detailed architectural clearance measurements are required.
Geometric Connecting Neck
The ZLH1050 incorporates a substantial angular connecting neck between the square mounting rose and curved lever.
The connecting section features polished metallic surfaces that provide decorative contrast with the brushed grip.
Its geometric structure creates a defined visual transition between the mounting base and the arched horizontal handle.
Zinc Alloy (Zamak) Construction
The ZLH1050 is manufactured from zinc alloy.
Zinc alloy is widely used for decorative architectural hardware because it supports detailed die-casting and various surface finishing processes.
The material is suitable for producing curved gripping sections, geometric connecting components and decorative square mounting structures.
Zinc alloy can accommodate different electroplating and coating processes depending on the selected manufacturing requirements.
Actual mechanical strength, operating durability and corrosion resistance depend on the material grade, internal construction, surface treatment and installation environment.
Layered Square Rose Design
The ZLH1050 features a square mounting rose measuring approximately 52 × 52 mm.
The reference rose thickness is approximately 10 mm.
The product image illustrates an outer square mounting frame with a smaller inner square decorative detail.
This layered structure adds visual depth and coordinates with the geometric connecting neck.
The exact inner square dimensions are not independently specified in the supplied drawing.
Matching Square Euro Profile Escutcheon
The engineering drawing illustrates a matching square keyhole escutcheon with a Euro profile-style opening.
Its approximate dimensions are:
Escutcheon Size: 52 × 52 mm.
Escutcheon Thickness: 8 mm.
The square escutcheon complements the mounting rose and provides a coordinated appearance for compatible cylinder lock applications.
Final cylinder compatibility, fixing positions and package inclusion should be confirmed before ordering.
Decorative Surface Finish Options
The ZLH1050 engineering drawing illustrates five metallic surface finish references.
Satin Nickel
A brushed silver metallic appearance with a soft satin texture.
The reference product image features brushed metallic surfaces combined with polished decorative accents.
Polished Chrome
A bright reflective silver appearance with a mirror-like finish.
This finish may emphasize the curved profile and geometric connection.
Matte Black
A contemporary matte black appearance suitable for modern and minimalist interiors.
Satin Gold
A brushed gold appearance with a refined metallic texture.
Suitable for decorative residential and hospitality hardware collections.
Polished Gold
A bright reflective gold appearance suitable for decorative interior architectural hardware.
Finish Note: These finishes are illustrated options. Actual availability, coating specifications, color consistency and two-tone finish combinations require DEGOL confirmation.
Key Product Features
Modern gently curved flat bar lever design.
Distinctive arched rectangular gripping profile.
Brushed and polished two-tone metallic appearance.
Decorative polished lower curved surface.
Geometric connecting neck.
Layered square rose design.
Zinc alloy (Zamak) construction.
Approximate 132 mm lever length.
Approximate 52 mm lever projection.
Approximate 20 mm maximum grip height.
Approximately 52 × 52 mm square mounting rose.
Matching square Euro profile-style escutcheon illustrated.
Five decorative metallic finish references.
Contemporary minimalist architectural styling.
Designed for consideration on compatible residential and commercial interior doors.
Wholesale sourcing and OEM/ODM customization inquiries welcomed.
APPLICATIONS
The ZLH1050 Curved Flat Bar Zinc Alloy Door Lever Handle can be considered for architectural projects requiring contemporary styling, decorative metallic finishes and coordinated square mounting hardware.
Modern Residential Houses
The ZLH1050 is a decorative door hardware option for contemporary residential houses and villas.
Its gently arched rectangular profile complements modern wooden doors, painted interior doors and architectural interiors featuring clean lines and subtle curves.
Apartments and Condominiums
The ZLH1050 can be considered for compatible apartment interior doors.
Its combination of satin brushed and polished metallic surfaces coordinates with modern apartment furniture, lighting fixtures and decorative hardware.
Hotels and Hospitality Interiors
The ZLH1050 may be considered for selected hotel guest rooms, serviced apartments and boutique hospitality projects.
The gently curved lever and two-tone metallic appearance provide decorative detailing suitable for modern hospitality interiors.
Project buyers should confirm mechanical performance, lock compatibility and applicable building requirements before specification.
Office Buildings
The ZLH1050 is relevant to modern office rooms, meeting rooms and administrative interior spaces.
Its curved rectangular profile offers a distinctive alternative to conventional straight bar door handles.
Commercial Interior Projects
The ZLH1050 may be considered for selected commercial interior doors requiring contemporary geometric hardware with decorative surface contrast.
Suitability depends on the complete hardware assembly and applicable project requirements.
Residential Construction Projects
The ZLH1050 can be considered for residential developments requiring coordinated modern door handles across multiple rooms or apartments.
Procurement teams should confirm final dimensions, lock compatibility, finish specifications and required product performance before bulk purchasing.
Interior Renovation Projects
The ZLH1050 can be considered for interior renovation projects involving replacement of existing door handles.
Installers should verify the existing locking mechanism, spindle dimensions and mounting preparation before installation.
Architectural and Interior Design Projects
The ZLH1050 is particularly relevant to architectural interiors emphasizing subtle curves, metallic contrasts and geometric design elements.
Its gently arched lever provides a decorative alternative to plain rectangular and cylindrical handles.
Architectural Hardware Wholesale Distribution
The ZLH1050 is relevant to door hardware wholesalers, building material importers, architectural hardware distributors and professional hardware retailers.
Its curved flat bar profile and two-tone metallic appearance provide a recognizable option for contemporary zinc alloy door handle collections.
South American Wholesale Markets
DEGOL welcomes sourcing inquiries from architectural hardware importers, distributors and construction procurement companies serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets.
The ZLH1050 can be considered for residential and hospitality interior hardware collections, subject to local installation requirements and final technical specifications.
Application Note
The ZLH1050 is primarily positioned for compatible interior door applications.
For exposed exterior, coastal, high-humidity, high-traffic, fire-rated or accessibility-regulated installations, buyers should verify the required mechanical performance, surface treatment and applicable standards before specifying the product.
SUITABLE DOOR TYPES
The DEGOL ZLH1050 Zinc Alloy Door Lever Handle Set is intended for consideration on compatible interior doors.
The supplied engineering drawing indicates an approximate reference door thickness range of 35–55 mm.
Final compatibility depends on the selected locking mechanism, door construction and approved mounting hardware.
Wooden Interior Doors
The ZLH1050 can be considered for compatible wooden interior doors used in residential buildings, apartments, offices and hotels.
Solid Timber Doors
Installation may be possible on suitable solid timber doors where the thickness, fixing positions and locking hardware meet the final product specifications.
Apartment Interior Doors
A contemporary decorative hardware option for compatible bedroom, study and general apartment interior doors.
Hotel Interior Doors
The ZLH1050 may be considered for selected hotel and serviced apartment interior doors using compatible lever-operated locking systems.
Office and Meeting Room Doors
The handle can be considered for compatible office and meeting room doors where the complete hardware assembly meets project requirements.
Metal Interior Doors
Installation may be possible on properly prepared metal doors with suitable reinforcement and compatible locking hardware.
Door Compatibility Requirements
Before placing a wholesale or construction project order, buyers should verify:
Door thickness compatibility.
Required square spindle dimensions.
Spindle length and engagement.
Fixing screw specifications.
Lock follower dimensions.
Selected latch or mortise lock mechanism.
Door material and construction.
Square rose mounting positions.
Handle orientation and operating clearance.
Cylinder and escutcheon compatibility.
Applicable local installation and building standards.
For South American construction projects, compatibility with locally specified mortise locks, cylinder systems and door preparation dimensions should be confirmed before bulk purchasing.
TECHNICAL DRAWINGS & LOCK COMPATIBILITY
The DEGOL ZLH1050 Door Lever Handle Set features a curved rectangular grip, geometric connecting neck, layered square mounting rose and matching square Euro profile-style keyhole escutcheon.
The supplied engineering drawing provides approximate reference dimensions.
Key Engineering Dimensions
Lever Length (L): Approx. 132 mm.
Lever Projection (H): Approx. 52 mm.
Maximum Grip Height (h): Approx. 20 mm.
Square Rose Size (D): Approx. 52 × 52 mm.
Rose Thickness (t): Approx. 10 mm.
Square Escutcheon Size (De): Approx. 52 × 52 mm.
Escutcheon Thickness (te): Approx. 8 mm.
Door Thickness: Approx. 35–55 mm.
Square Spindle Size: Approx. 8 × 8 mm.
Fixing Screws: Approx. M4, 2 pcs per side.
Lock Compatibility: Verification Required.
All dimensions are reference values and require factory confirmation before use as final engineering specifications.
Curved Flat Bar Lever Geometry
The ZLH1050 features a gently arched gripping section that extends horizontally from the mounting assembly.
The lever has an approximate length of 132 mm and projection of 52 mm.
The maximum grip height is approximately 20 mm.
The gripping section has a flat, broad profile with a curved horizontal silhouette.
The supplied engineering drawing does not specify the complete grip width, individual curvature radius or detailed cross-sectional dimensions.
Buyers requiring these measurements should request an approved technical drawing.
Two-Tone Surface Design
The reference product image illustrates a brushed metallic upper surface and polished lower curved surface.
The geometric connecting neck also features polished decorative components.
This contrasting metallic appearance highlights the shape of the curved lever.
The exact finish combination should be confirmed using approved product samples.
Layered Square Rose Structure
The ZLH1050 incorporates an approximately 52 × 52 mm square mounting rose.
The approximate rose thickness is 10 mm.
The reference image illustrates a decorative inner square detail within the outer mounting rose.
The supplied drawing does not specify the individual dimensions of this decorative inner square.
Final mounting positions and internal fixing details should be verified before installation.
Square Euro Profile-Style Escutcheon
The engineering drawing illustrates a matching square escutcheon with a Euro profile-style keyhole opening.
Its reference dimensions are:
Escutcheon Size: Approx. 52 × 52 mm.
Escutcheon Thickness: Approx. 8 mm.
The escutcheon provides a coordinated appearance for compatible cylinder locking arrangements.
Buyers should verify the selected cylinder profile, fixing positions and handle-to-cylinder centre distance before ordering.
Square Spindle Compatibility
The engineering drawing indicates an approximate 8 × 8 mm square spindle specification.
Before ordering, buyers should verify:
Required spindle dimensions.
Spindle length.
Lock follower compatibility.
Spindle engagement.
Door thickness.
Handle mounting positions.
Lever return requirements.
The final spindle specification should be confirmed with DEGOL.
Mortise Lock and Latch Compatibility
The engineering drawing references Euro cylinder and latch compatibility.
However, compatibility with a particular latch or mortise lock model has not been verified.
The drawing does not specify a fixed backset, PZ centre distance or approved lock model.
Buyers should confirm the selected lock's follower, cylinder profile, mounting arrangement and operating requirements.
A mortise lock body or cylinder should not be assumed to be included unless explicitly stated in the quotation.
Zinc Alloy Material Characteristics
The ZLH1050 is manufactured from zinc alloy.
Die-Casting Design Flexibility
Zinc alloy supports the production of curved decorative shapes, geometric connecting components and detailed mounting structures.
This makes it suitable for the ZLH1050's curved rectangular gripping profile.
Decorative Surface Finishing
Zinc alloy components can receive suitable electroplating or coating treatments.
The final appearance depends on the selected process, coating specifications and manufacturing requirements.
Mechanical Performance
The durability of a zinc alloy door handle depends on its material composition, internal construction, assembly quality and operating conditions.
Project-specific performance requirements should be verified before approval.
Corrosion Resistance
Corrosion resistance depends on the selected coating system, surface preparation and environmental exposure.
For coastal and humid environments, buyers should confirm appropriate coating specifications and corrosion testing requirements.
Surface Finish References
| Finish | Appearance | Availability |
|---|---|---|
| Satin Nickel | Brushed Silver | Reference Photo |
| Polished Chrome | Mirror Silver | Confirmation Required |
| Matte Black | Matte Black | Confirmation Required |
| Satin Gold | Brushed Gold | Confirmation Required |
| Polished Gold | Bright Gold | Confirmation Required |
Final finish availability, coating requirements and two-tone combinations should be confirmed with DEGOL before ordering.
Technical Note
The ZLH1050 engineering drawing explicitly identifies all listed measurements as reference dimensions.
Final production dimensions, tolerances, mounting specifications, lock compatibility and included accessories must be confirmed by the factory before bulk purchasing.
INSTALLATION GUIDE
The ZLH1050 Zinc Alloy Curved Flat Bar Door Lever Handle Set should be installed according to the approved product specifications and selected locking system.
The following steps provide general installation guidance.
Step 1: Confirm Door Thickness
Measure the door thickness and verify compatibility with the selected product configuration.
The reference engineering drawing indicates approximately 35–55 mm.
Step 2: Check Lock Compatibility
Confirm that the selected latch or mortise lock is compatible with the final spindle and mounting requirements.
Step 3: Prepare the Door
Mark the spindle opening and fixing positions according to the approved installation drawing.
Avoid preparing the door using unconfirmed reference measurements.
Step 4: Install the Lock Mechanism
Fit the selected compatible latch or mortise lock into the prepared door.
Secure it according to the lock manufacturer's instructions.
Step 5: Insert the Square Spindle
Insert the approved square spindle through the lock follower.
The reference engineering drawing indicates approximately 8 × 8 mm.
Ensure sufficient spindle engagement on both sides of the door.
Step 6: Position the Square Rose Assemblies
Align the square mounting components with the spindle opening and approved fixing positions.
Ensure that both roses are correctly oriented and sit flat against the door surfaces.
Step 7: Secure the Fixing Hardware
Install suitable fixing screws according to the approved mounting arrangement.
The supplied drawing references M4 screws, two per side.
Step 8: Install the Lever Handles
Fit the curved flat bar lever handle assemblies onto the spindle.
Align both handles according to the intended door operation and ensure that the curved profiles are correctly oriented.
Secure the assemblies using the appropriate fastening components.
Step 9: Install the Square Escutcheons
Where included, install the matching square Euro profile-style escutcheons according to the selected cylinder and lock arrangement.
Step 10: Test Handle Operation
Operate both handles several times.
Verify smooth lever movement, correct latch retraction, secure mounting and proper return operation.
Installation Note
These instructions provide general guidance only.
Final installation requirements depend on the confirmed ZLH1050 specifications, selected locking mechanism and door construction.
Professional installation is recommended for commercial and construction project applications.
FACTORY CAPABILITY
DEGOL Hardware – Zinc Alloy Door Handle Manufacturer & Export Supplier in China
Jiangmen Degol Hardware Co., Ltd. is a China-based architectural hardware company serving international wholesalers, importers, distributors and construction project procurement companies.
For international buyers searching for a China door handle factory or zinc alloy door handle manufacturer in China, DEGOL welcomes inquiries for architectural door hardware supply, product specifications and OEM/ODM cooperation.
Decorative Zinc Alloy Door Hardware Supply
The ZLH1050 is designed for customers seeking contemporary zinc alloy door handles with distinctive curved rectangular styling.
Its arched flat bar grip, contrasting metallic surface appearance and layered square rose provide a recognizable design for modern architectural hardware collections.
International buyers can discuss product specifications, decorative finishes, mounting configurations and wholesale purchasing requirements with DEGOL.
OEM & ODM Customization
DEGOL welcomes OEM and ODM inquiries from architectural hardware wholesalers, importers, distributors and private-label brands.
Depending on technical feasibility and commercial requirements, customization discussions may include:
Custom product logos and branding.
Alternative metallic surface finishes.
Customized brushed and polished finish combinations.
Modified curved lever dimensions.
Curved grip design adjustments.
Geometric neck modifications.
Custom square rose configurations.
Decorative inner square rose adjustments.
Matching keyhole escutcheon requirements.
Private-label product packaging.
Customized carton labels.
Product development based on customer drawings or samples.
All customization requests are subject to technical review, tooling feasibility and commercial confirmation.
Quality Control Requirements
For wholesale and construction project orders, buyers may discuss:
Zinc alloy material specifications.
Casting dimensional accuracy.
Curved lever profile consistency.
Brushed gripping surface quality.
Polished decorative component appearance.
Square rose alignment.
Surface coating specifications.
Handle assembly performance.
Mounting compatibility.
Packaging protection.
Project-specific inspection requirements.
Available quality documentation, inspection arrangements and test reports should be confirmed before production approval.
International Wholesale Cooperation
DEGOL welcomes sourcing inquiries from:
Architectural hardware wholesalers.
Door handle importers.
Building material distributors.
Hardware retailers.
Construction project procurement companies.
Private-label architectural hardware brands.
South American Market Cooperation
DEGOL welcomes product sourcing inquiries from businesses serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets.
Customers can provide their preferred finish, required order quantity, packaging specifications, destination country and project installation requirements to discuss wholesale supply arrangements.
PACKAGING & EXPORT INFORMATION
DEGOL welcomes international wholesale and export inquiries for the ZLH1050 Curved Flat Bar Zinc Alloy Door Lever Handle Set.
Product Packaging
Packaging arrangements may be discussed according to the selected product configuration, order quantity and customer requirements.
Possible packaging options include:
Individual protective packaging.
Protective wrapping for brushed metallic surfaces.
Surface protection for polished decorative components.
Separate protection for square roses and escutcheons.
Retail product boxes.
Export master cartons.
OEM branded packaging.
Private-label carton markings.
Export palletizing arrangements.
Installation Accessories
The supplied ZLH1050 engineering drawing provides approximate reference specifications for spindle and fixing hardware.
Customers should confirm whether the selected product package includes:
Two curved lever handle assemblies.
Square mounting roses.
Matching Euro profile-style escutcheons.
Square spindle.
Fixing screws.
Additional mounting components.
Installation tools.
Installation instructions.
Exact accessory specifications, quantities and packaging configurations should be confirmed in the final packing list.
Wholesale Order Information
Customers can contact DEGOL to discuss:
Minimum order quantity.
Sample availability.
Confirmed production dimensions.
Available metallic finishes.
Two-tone surface finish requirements.
Wholesale pricing.
OEM/ODM customization.
Production lead time.
Packaging requirements.
Quality inspection arrangements.
International shipping options.
Export and Shipping
DEGOL welcomes export inquiries from international architectural hardware wholesalers and importers.
Customers can request quotations according to order quantity, destination country and preferred shipping terms.
FOB, CIF and other applicable Incoterms may be discussed subject to commercial confirmation.
Information Required for an Accurate Wholesale Quotation
Product Model: ZLH1050.
Product Type: Curved Flat Bar Zinc Alloy Door Lever Handle Set.
Material: Zinc Alloy.
Surface Finish: Required metallic finish or two-tone combination.
Order Quantity: Required number of sets.
Door Thickness: Required project specification.
Spindle Size: Required lock specification.
Fixing Hardware: Subject to factory confirmation.
Lock Type: Selected latch or mortise lock.
Accessories: Required product configuration.
Customization: OEM/ODM requirements.
Packaging: Standard or private-label.
Destination: Country and port.
Shipping Terms: Preferred Incoterms.
Final pricing, MOQ, packaging, payment terms, production dimensions and lead times are subject to quotation confirmation.
FAQ
Q1: What material is the DEGOL ZLH1050 door lever handle made from?
The DEGOL ZLH1050 is made from zinc alloy, a material commonly used for decorative architectural hardware because it supports detailed casting and various metallic surface finishes.
Q2: What makes the ZLH1050 different from conventional rectangular door handles?
The ZLH1050 features a gently arched flat bar lever with contrasting brushed and polished metallic surfaces. Its curved rectangular profile and layered square rose distinguish it from conventional straight bar and cylindrical door handles.
Q3: What are the main dimensions of the ZLH1050 door handle?
The supplied reference drawing indicates an approximate lever length of 132 mm, projection of 52 mm, maximum grip height of 20 mm and 52 × 52 mm square mounting rose. All measurements require factory confirmation before use as final production specifications.
Q4: What surface finishes are available for the ZLH1050?
The reference product illustrates satin brushed and polished metallic surfaces. The engineering drawing also shows satin nickel, polished chrome, matte black, satin gold and polished gold as possible finish references. Actual availability should be confirmed with DEGOL.
Q5: What door thickness is suitable for the ZLH1050?
The engineering drawing indicates an approximate reference door thickness range of 35–55 mm. Final compatibility depends on the selected spindle, locking system and mounting hardware.
Q6: What spindle size does the ZLH1050 use?
The supplied drawing indicates approximately 8 × 8 mm as the reference square spindle size. Buyers should confirm the final spindle specification and compatibility with their selected lock follower.
Q7: Is the ZLH1050 compatible with Euro profile mortise locks?
The engineering drawing illustrates a matching square Euro profile-style escutcheon and references Euro cylinder or latch compatibility. However, compatibility with specific lock bodies, cylinder profiles and mounting positions requires verification.
Q8: Does the ZLH1050 include fixing screws and matching escutcheons?
The drawing illustrates a matching square keyhole escutcheon and references approximately M4 fixing screws, two per side. Actual included accessories and quantities should be confirmed in the final quotation.
Q9: Can DEGOL provide OEM/ODM customization and wholesale pricing for ZLH1050?
DEGOL welcomes OEM/ODM and wholesale sourcing inquiries. Customers can discuss custom branding, surface finishes, packaging requirements, samples, minimum order quantities and wholesale pricing, subject to technical and commercial confirmation.
Q10: Can DEGOL supply ZLH1050 zinc alloy door handles to South American wholesalers and construction buyers?
DEGOL welcomes inquiries from architectural hardware importers, distributors and construction project procurement companies serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets. Buyers can provide their order quantity, finish requirements, packaging specifications and destination country to request a wholesale quotation.
CONTACT DEGOL – REQUEST A WHOLESALE QUOTE
Looking for a curved flat bar zinc alloy door lever handle with a two-tone metallic finish and layered square rose for your architectural hardware collection, wholesale distribution business or construction project?
Contact DEGOL Hardware for product specifications, confirmed technical drawings, available finishes, sample information, OEM/ODM customization inquiries and wholesale pricing.
Product Model: ZLH1050
Product Name: Curved Flat Bar Zinc Alloy Door Lever Handle with Two-Tone Finish and Square Rose for Interior Doors
Material: Zinc Alloy (Zamak)
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
WhatsApp Link: https://wa.me/8613725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Whether you are an architectural hardware wholesaler, importer, building material distributor or construction project buyer, DEGOL welcomes your product sourcing inquiries.
For faster quotation processing, please provide your required quantity, preferred surface finish, door thickness, lock compatibility requirements, packaging specifications and destination country.
Request Your ZLH1050 Curved Flat Bar Zinc Alloy Door Lever Handle Wholesale Quote Today.