Degol introduces the handle lock and its installation and maintenance

Handle locks are divided into split locks, conjoined locks, and three-bar quick-release locks. There are many product materials, including zinc alloy, stainless steel, copper and aluminum alloy. In terms of styles, there are three types of interior door locks: European style, Chinese style, and modern simplicity. In order to match with various styles of furniture, the shapes and colors of the handles are more varied and colorful. The product has good safety and is often used for entry doors and room doors. Residential, office buildings, hotels, etc. can be used. The handle that has been electroplated and electrostatically painted has the effects of wear resistance and corrosion resistance. In addition to matching the room decoration style, the handle should be able to withstand a large pulling force. Generally, the handle should be able to withstand a pulling force of more than 6 kg.

Handle locks are divided into split locks, conjoined locks, and three-bar quick-release locks.

In terms of styles, there are three types of indoor door locks: European style, Chinese style, and modern simplicity.

There are many product materials, including zinc alloy, stainless steel, copper, aluminum alloy

The product has good safety and is often used for entry doors and room doors.

Residential, office buildings, hotels, etc. can be used.

According to the material, the handle lock can be divided into space aluminum, stainless steel, copper die-casting, and zinc alloy. Space aluminum and stainless steel are advanced materials. After surface treatment, they have a bright luster and a soft feel. Although they are corroded by sweat and moisture, they are not easy to fade. rust. The die-cast copper handle lock is relatively thick and the price is moderate, while some low-quality zinc alloy handle locks are easier to break when used. Because the surface of the zinc alloy handle lock is copper-plated, it is not easy to distinguish it from the copper die-cast handle lock when purchasing. The knife is repeatedly tumbled at the bottom plates of the two handle locks. The brass-colored handle lock is a copper die-cast handle lock, and the silver-white handle lock is a zinc alloy handle lock.

lock installation

Cut out the installation paper and attach it to the appropriate height of the door (the center of the hole is about 1 meter away from the ground). According to the left and right opening, adjust the inclined surface of the oblique tongue to face the closing door, and then put the lock body into the lock body hole and fasten it with self-tapping screws.

Insert the lock body into the pre-opened slot, fix the lock body with screws, insert the square core into the square hole of the lock body, put the handle square holes on the front and rear panels into the square core, and screw in the two fastening screws on the inner panel (temporarily). Do not tighten), pass the lock cylinder through the lock cylinder hole from the inside of the door to the outside of the door, fasten the lock cylinder and the lock body with the lock cylinder fixing screw, and then tighten the 2 fastening screws on the inner panel.

Cut out the buckle box hole and the buckle plate support socket at the corresponding position of the door frame, install the buckle box and the buckle plate, and fasten them with self-tapping screws, so that the lock tongue should be stretched and retracted freely.

Daily maintenance of handle lock

The newly renovated house contains a lot of corrosive gases, especially the paint on the wooden door will emit formaldehyde and other corrosive gases, which will seriously affect the service life of the handle lock, and even corrode the locks. Daily ventilation is required to keep the room dry.

To remove dust and other sundries on the surface of the handle lock, use a dry cloth to wipe the handle and lock body. Do not use a damp cloth to wipe or clean with an acid or alkaline cleaner.

In the process of opening and closing the door every day, it is best to hold the handle and screw the deadbolt into the lock body, and then let go after closing the door. Do not hit the door with force, otherwise the service life will be reduced.

After the handle lock is used for a period of time, it may appear that the opening is not smooth. Do not drip ordinary lubricating oil or oil into the lock cylinder. Use the professional lubricating oil to drip into the lock cylinder and open it several times.

Contact us about good quality and cheap furniture hardware and door hardware.

Please check our official website：https://www.degolhardware.com/

+86 13725946499

Email: info@degolhardware.com

Kailyn

#doorhardware #doorstopper #doorlocks #doorbolt #doorhandle #floordrain #hardwarestore #hardware #furniturelegs #cylinder #mortiselock #doorbolt #doorcloser

#doorhook #doorhinge #furniturehandle #furniturehinge #furnitureleg #doorpullhandle

#glassdoorlock #windowhandle #windowhinge #windowlock #floorspring