Door and window hardware accessories quick question and answer series

Degol Hardware has prepared a series of articles about the knowledge of door and window hardware accessories for you. Are you still a novice in door and window hardware? Do you still have questions about door and window hardware? Then take a look at the quick questions and answers arranged by Degol Hardware for you~

Door and window hardware accessories Quick question: Is it better to install hinge doors or floor spring doors for doors used in stores?

Quick answer for window and Door hardware accessories: It is better to use the door of the store to install the glass floor bounce door. From the appearance point of view, it is atmospheric and beautiful. In use, the floor spring door can be positioned at 90 degrees, which is convenient for positioning and simple to operate. You may be worried that in winter, the floor spring will be frozen. In fact, there is heating in the room, and the floor spring will not affect the use.

Door and window hardware accessories Quick question: The window opening method is to open upwards, what kind of hinge is used?

Quick answer of door and window hardware accessories: In aluminum alloy doors and windows, there is a window-type opening method that opens upwards-top-hung windows, which are used in common office buildings. It should be noted that the door and window hardware accessories used in the top-hung window are not hinges. Instead, it is a sliding support, which can cooperate with the wind support at the same time. To achieve the effect of opening and positioning upwards.

Quick question for door and window hardware accessories: Generally speaking, how long do the aluminum rods of door and window hardware accessories see how long the nails are?

Quick answer for door and window hardware accessories: The aluminum rod pulls the nail, usually in the middle of the aluminum rod, and the length varies from 20-50mm. The length of the nail depends on the corresponding door and window aluminum profile cavity, so on the finished doors and windows, from You can't see the nails from the outside. So to chew on how long the nails are, you can only remove the aluminum rod to check.