How To Install Spring Loaded Hinges ?

Degol : How To Install Spring Loaded Hinges ?

First place the hinge in the correct position against the surface. The hinge must be 10 inches from the top and bottom of the door. Therefore, please use the scale to trace this point before installing the hinge.

After fixing the points, then use a chisel to create a deep enough cut for the hinge. Therefore, you can hit it with a hammer. Since the hinge has different parts, it needs to be retracted on the surface.

Now, use a pencil to mark points on the surface to fix the screws. These points will make it easier to drill holes for hinge installation.

After the point is accurately fixed on the surface, place the hinge in that position. After placing the hinge, install the panel so that the spring-loaded hinge has screws to tighten.

Check the panel again because it is properly placed on the surface, then tighten the screws through the panel. After the installation is complete, open the door to check whether it touches the wall.