How To Install The Door Handle? What Is The Installation Height?

Installation method of door handle:

Drill corresponding installation holes on the door according to the size of the door handle, and open the door during installation to facilitate the operation of the door handles on both sides. Install each corresponding part into the hole position in sequence, align and fix the screw with the corresponding screwdriver. Install the screw and connecting screw on the outer panel component, insert the connecting square rod into the square rod hole of the door handle, align the handle square hole of the outer panel component with the connecting square rod hole, and install the outer panel component. After alignment, use a screwdriver to rotate the screw and fix it. Insert the lock head body into the lock hole from the inside out. Insert the screw through the lock body panel hole and align it with the thread of the lock head body installation hole. Tighten it with a screwdriver, and then install the lock buckle box or lock buckle plate at the corresponding position on the door frame.

Installation height of door handle:

The installation height of the door handle is generally between 80-100cm, which only refers to the door, while the height of the door handle from the ground is generally 110cm. Of course, some anti-theft door handles may have a height of 113cm, but this is only a rough estimate. Each family member has different heights and door opening habits, so the specific height of the door handle should be considered.