+86 13725946499      info@degolhardware.com
You are here: Home » Blogs » Industry News » How to fix the broken door handle

PRODUCT CATEGORY

How to fix the broken door handle

Views: 12     Author: Site Editor     Publish Time: 2021-09-23      Origin: Site

1. There are two kinds of rotary door handles. If you can see the fixing screws and if you can't see the fixing screws from the outside, first remove the fixing screws at the lock tongue.

2. Remove the lock tongue, and then remove the screws on the baffle in the room. You can see the internal fastening structure. You can disassemble it in sequence. There are special cir clips in some places. You can only remove them by preparing cir clip pliers.

3. If you can't see the lock with fastening screws from the outside, first remove the screws at the lock tongue and remove the lock tongue. There is a small hole on the lock rod between the handle inside the  room and the door. You can buy the accessories of the lock or find a sharp object by yourself.

4. Insert into the small hole and pull out the head of the door handle while pressing. After the rotating head is pulled out, rotate the fixed metal plate on the lock rod close to the door and remove it. Then you  will see two fixed screws. Remove the screws and fixed iron sheet, and you can remove the whole lock outside the room.

Contact us

QUICK LINK

PRODUCTS

NEWS CENTER

CONTACT US

 Room 501, Building 2, No. 898 Jiangmen Avenue Middle, Pengjiang District, Jiangmen CityGuangdong, China  529000 
  +86-750-3915520
  +86 13725946499
  info@degolhardware.com
  jennyfung567
  13725946499
 
Leave a Message
Contact us
Copyright  2021 Degol Hardware Co., Ltd  .|Sitemap