The selection of hinges for doors, drawers, and cabinets is meticulous!

Decoration hardware and building materials can be used for furniture ranging from doors to drawers, wardrobe doors, cabinet doors, and more. The specifications of the hinges used in different furniture vary, and the precautions to be taken when choosing them are also different. Next, the editor will introduce the selection techniques for door hinges, drawer guide rail hinges, and cabinet door hinge hinges.

The door hinge material is made of both full copper and stainless steel. The standard area of a single hinge is 10cm × 3cm and 10cm × 4cm, with a center shaft diameter between 1.1cm and 1.3cm, and a hinge wall thickness of 2.5mm to 3mm. For easy and noise free opening when selecting pages, it is best to choose a hinge with a ball bearing inside the center shaft.

The drawer guide rails are divided into two types: two section rails and three section rails. When selecting, the surface paint and electroplating brightness, as well as the clearance and strength of the load-bearing wheels, determine the flexibility and noise of the drawer opening and closing. Therefore, wear-resistant and evenly rotating load-bearing wheels should be selected.

Cabinet door hinges can be divided into two types: detachable and non detachable, and the cover position after the cabinet door is closed can be divided into three types: large bend, medium bend, and straight bend. Generally, medium bend is the main type. In addition to visually inspecting and feeling the surface of the hinge smooth and smooth, attention should be paid to the good reset performance of the hinge spring. The hinge can be opened 95 degrees, and both sides of the hinge can be forcefully pressed by hand to observe that the supporting spring sheet is not deformed or broken. A very sturdy product is of qualified quality.