What are the methods for installing a door closer?

The correct setup technique can optimize the duty of the door closer, yet likewise minimize several unnecessary difficulty, it is required to select the appropriate door better and the specific installment method.

1, REQUIREMENT INSTALLMENT.

The body of the door more detailed is mounted on the side of the moving door, and the support arm is mounted on the door framework. This installation technique appropriates for slim door framework, there is not enough area to install the door more detailed. This installment additionally applies to the direction of the door open without obstacles door open up to a large adequate angle, the door closer will not strike the international object.

2, THE UPPER DOOR FRAMEWORK SETUP.

Door closer is set up on the press door side, the assistance arm is set up on the door. This type of setup appropriates for the door framework is wide, there suffices room to install the door better. Compared to the typical installment, this setup is suitable for unlocking in the direction of the wall and other barriers. Compared with the conventional setup, this setup method of shutting pressure is bigger, appropriate for bigger and heavier doors.

3, PARALLEL INSTALLATION.

Door closer is set up on the side of the press door, parallel plate is installed on the door framework. This installment appropriates for door framework is very narrow, or virtually no door framework you according to this way after setup, since there is no protruding connecting rod and rocker, so a lot more stunning. Compared with the standard installment, this installment is suitable for opening the door towards the wall and various other challenges. Compared to the conventional installation, the closing force of this installment is smaller.

4, HIDDEN SETUP.

This installment approach puts on concealed door closers, installment approaches and slide rail setup the exact same. Comparison with the initial three installation methods, this installment method's closing pressure is the tiniest. According to in this manner of installation, the door remains in the closed state without subjected parts, so one of the most beautiful. This setup method is the most complex, the most effective requirement for experts to install. This installation requires a huge gap with the door structure, usually 10MM (or the installment of the upper part of the door to get rid of the material to raise the gap). The thickness of the door requires to be more than 42MM.

5, SLIDE RAIL SETUP.

General door better set up in the door, slide rail mounted in the door framework. Door closers can be on both sides of the door. Contrast with the very first 3 installment methods, this installment method to shut the door pressure is marginal. According to by doing this after setup, because there is no extending link and rocker, so extra stunning.