LH1017
Degol
| Availability: | |
|---|---|
| Quantity: | |
LH1017 – Stainless Steel Straight Tubular Door Lever Handle on Oval Rose for Modern Residential Hotel and Commercial Doors
| Product Attribute | Specification |
|---|---|
| Model Number | LH1017 |
| Lever Length | 135 mm |
| Lever Diameter | Ø19 mm |
| Lever Projection | 60 mm |
| Oval Rose Size | 65 × 31 mm |
| Rose Thickness | 10 mm |
| Escutcheon Size | 65 × 31 mm |
| Spindle Size | 8 × 8 mm |
| Suitable Door Thickness | 35–55 mm |
| Fixing Screws | M4 |
| Installation Method | Through-Bolt / Screw Fixing |
Note: Dimensions are based on the supplied LH1017 engineering drawing. Dimensional tolerances are to be confirmed (TBC). Final specifications and accessories should be verified before ordering.
PRODUCT INTRODUCTION
The DEGOL LH1017 Stainless Steel Straight Tubular Door Lever Handle on Oval Rose is a modern architectural door handle featuring a clean cylindrical lever, compact oval mounting rose and coordinated Euro profile keyhole escutcheon design.
Designed for compatible residential, hotel and commercial interior doors, the LH1017 combines minimalist styling with a practical lever-operated door hardware configuration.
Unlike conventional door handles with large round or square mounting roses, the LH1017 features a 65 × 31 mm narrow oval rose, creating a compact appearance that complements contemporary door designs.
The handle incorporates a 135 mm straight tubular lever with a Ø19 mm diameter, providing a streamlined cylindrical gripping profile.
Its 60 mm lever projection provides clearance between the gripping section and the door surface, subject to the final installation configuration.
The cylindrical lever is connected to the oval mounting rose through a compact stem, producing a clean and balanced architectural appearance.
The matching 65 × 31 mm oval Euro profile escutcheon creates a coordinated visual design for compatible cylinder lock installations.
Manufactured from stainless steel, the LH1017 is designed for architectural hardware applications where durability, corrosion resistance and contemporary appearance are important.
The reference product features a brushed stainless steel appearance, while the engineering drawing also illustrates polished stainless steel, PVD gold and PVD black surface finishes.
These finishes offer decorative possibilities for residential apartments, hotel guest rooms, office buildings and modern commercial interiors.
The LH1017 is designed for use with compatible lever-operated latch or mortise lock systems.
The engineering drawing specifies an 8 × 8 mm square spindle, M4 fixing screws and a reference door thickness range of 35–55 mm.
For international architectural hardware importers, wholesalers, building material distributors and construction project buyers, the LH1017 provides a modern straight tubular door lever design suitable for wholesale sourcing and OEM/ODM inquiries.
Key Product Features
Modern straight tubular lever design.
Minimalist cylindrical gripping profile.
135 mm lever length.
Ø19 mm lever diameter.
60 mm lever projection.
Compact 65 × 31 mm oval mounting rose.
10 mm rose thickness.
Matching oval Euro profile-style keyhole escutcheon.
Stainless steel construction.
Brushed, polished, PVD gold and PVD black finish references.
Compatible with specified 8 × 8 mm square spindle systems.
Reference door thickness range of 35–55 mm.
Suitable for compatible residential, hospitality and commercial interior doors.
OEM/ODM customization and wholesale sourcing inquiries welcomed.
APPLICATIONS
The LH1017 Stainless Steel Straight Tubular Door Lever Handle on Oval Rose is suitable for architectural projects requiring clean, minimalist door hardware with a compact mounting design.
Residential Buildings and Apartments
Suitable for modern apartment interiors, residential developments, housing projects and home renovation applications requiring contemporary stainless steel door handles.
Hotels and Hospitality Projects
A suitable design option for compatible hotel guest room doors, serviced apartments, boutique hotels and hospitality interior applications.
The narrow oval rose and straight cylindrical lever create a clean architectural appearance suitable for modern hospitality interiors.
Office Buildings and Commercial Interiors
The LH1017 can be considered for office doors, meeting rooms, administrative areas and selected commercial interior doors where compatible lever-operated locking hardware is specified.
Modern Architectural Projects
The straight tubular lever and compact oval rose complement minimalist architectural styles, contemporary interior doors and modern building hardware collections.
Residential and Commercial Renovation
Suitable for consideration in renovation projects where a compact oval mounting rose and coordinated stainless steel lever handle design are preferred.
Architectural Hardware Wholesale and Distribution
The LH1017 is a relevant product for international hardware importers, architectural hardware wholesalers, door hardware distributors and building material suppliers seeking modern stainless steel lever handles.
It can also be considered for wholesale sourcing inquiries from South American markets, including Brazil, Chile, Peru, Colombia and Argentina.
Application Note
For fire-rated, security-rated, high-traffic or exposed exterior installations, buyers should confirm the required product performance, material specifications, lock compatibility and applicable local standards before selecting the LH1017.
SUITABLE DOOR TYPES
The DEGOL LH1017 Straight Tubular Stainless Steel Door Handle can be considered for different door constructions when the installation dimensions and locking hardware are compatible.
Wooden Interior Doors
Suitable for compatible residential, apartment, hotel and office wooden doors.
Solid Timber Doors
Applicable where the door thickness, latch or mortise lock dimensions and fixing requirements match the selected handle configuration.
Metal Doors
Can be considered for metal doors with suitable mounting preparation, fixing support and compatible lock mechanisms.
Hotel Guest Room Doors
A contemporary hardware option for compatible hospitality doors requiring lever-operated latch or mortise lock systems.
Office and Commercial Interior Doors
Suitable for selected office, meeting room and commercial interior doors where the mounting system and locking hardware meet the project requirements.
Door Compatibility Requirements
The LH1017 engineering drawing specifies a reference door thickness range of 35–55 mm.
Before placing a bulk order, buyers should confirm:
Door material and thickness.
Mortise lock or latch specifications.
8 × 8 mm square spindle compatibility.
Oval rose mounting dimensions.
Required fixing positions.
Lock cylinder configuration.
Escutcheon dimensions.
Handle orientation and installation clearances.
For international construction projects, local door preparation requirements and lock standards should be checked before installation.
TECHNICAL DRAWINGS & LOCK COMPATIBILITY
The DEGOL LH1017 Stainless Steel Door Lever Handle Set features a straight cylindrical lever, compact oval mounting rose and matching Euro profile-style keyhole escutcheon.
Key Engineering Dimensions
Lever Length: 135 mm.
Lever Diameter: Ø19 mm.
Lever Projection: 60 mm.
Oval Rose Size: 65 × 31 mm.
Rose Thickness: 10 mm.
Escutcheon Size: 65 × 31 mm.
Escutcheon Thickness: 10 mm.
Square Spindle Size: 8 × 8 mm.
Suitable Door Thickness: 35–55 mm.
Fixing Screw Specification: M4.
Installation Method: Through-bolt or screw fixing, subject to mounting configuration.
Dimensional Tolerances
The supplied engineering drawing identifies dimensional tolerances as TBC (To Be Confirmed).
Final production tolerances should be verified with DEGOL before approving technical specifications or placing bulk orders.
Straight Tubular Lever Design
The LH1017 features a cylindrical stainless steel lever with a Ø19 mm gripping diameter.
Its straight 135 mm lever design provides a clean horizontal appearance without the pronounced curves found in wave-shaped or decorative door handles.
The tubular lever profile is suitable for architectural hardware collections emphasizing simple geometry and modern stainless steel finishes.
Compact Oval Rose Design
The LH1017 features a 65 × 31 mm oval mounting rose with a thickness of 10 mm.
The compact oval shape distinguishes the product from conventional circular and square rose door handles.
The narrow mounting profile provides a streamlined visual appearance and can complement modern door designs where compact hardware proportions are preferred.
Euro Profile Oval Escutcheon
The supplied engineering drawing illustrates a matching oval keyhole escutcheon with a Euro profile-style opening.
The escutcheon measures 65 × 31 mm, with an illustrated thickness of 10 mm.
The matching oval design creates a coordinated appearance when used with a compatible cylinder lock installation.
Buyers should confirm the required cylinder profile, fixing arrangement and handle-to-cylinder centre distance before ordering.
Square Spindle Compatibility
The LH1017 engineering drawing specifies an 8 × 8 mm square spindle.
This spindle configuration is intended for compatible lever-operated latch or mortise lock mechanisms.
Before installation, verify:
Lock follower size.
Spindle length.
Spindle engagement.
Door thickness.
Handle mounting arrangement.
Lever return mechanism.
Lock operating requirements.
Mortise Lock Compatibility
The LH1017 can be considered for compatible lever-operated mortise lock systems and latch mechanisms.
The supplied engineering drawing does not specify a fixed PZ centre distance, lock backset or particular mortise lock model.
Compatibility with a selected lock must therefore be verified using the relevant lock technical drawing.
Stainless Steel Material Reference
The LH1017 is specified as a stainless steel door lever handle.
The engineering drawing includes a general comparison of stainless steel 304 and 201 materials.
Stainless Steel 304
UNS designation: S30400.
Generally offers higher corrosion resistance.
Suitable for consideration in more demanding architectural environments.
Often preferred for applications where greater environmental resistance is required.
Stainless Steel 201
UNS designation: S20100.
Provides a cost-effective stainless steel material option.
Generally better suited to controlled indoor environments.
Can be considered for projects where the environmental conditions and performance requirements permit its use.
The actual stainless steel grade supplied for LH1017 must be confirmed with DEGOL.
Surface Finish Options
The engineering drawing illustrates four stainless steel surface finish references.
SSS – Satin Stainless Steel
Brushed silver appearance with a matte metallic finish.
PSS – Polished Stainless Steel
Bright mirror-like silver appearance.
PVD-GD – PVD Gold
Decorative gold appearance produced through PVD coating.
PVD-BK – PVD Black
Decorative black appearance produced through PVD coating.
Actual finish availability, coating specifications, color requirements and applicable minimum order quantities should be confirmed before ordering.
Technical Note
All dimensions are based on the supplied LH1017 engineering drawing.
Final production specifications, tolerances, material grades, mounting components, lock compatibility and accessory configurations should be confirmed against approved technical documentation.
INSTALLATION GUIDE
The LH1017 Stainless Steel Straight Tubular Door Lever Handle on Oval Rose is intended for installation with a compatible latch or mortise lock system.
The following instructions provide general installation guidance.
Step 1: Confirm Door Thickness
Check that the door thickness falls within the specified 35–55 mm reference range.
Verify the selected latch or mortise lock and mounting hardware requirements.
Step 2: Prepare the Door
Mark the spindle opening, lock position and required fixing locations according to the approved installation drawing.
Check the oval rose mounting positions before drilling.
Step 3: Install the Latch or Mortise Lock
Fit the selected compatible latch or mortise lock into the prepared door opening.
Secure it according to the lock manufacturer's instructions.
Step 4: Insert the Square Spindle
Insert the specified 8 × 8 mm square spindle through the lock follower.
Ensure that the spindle is correctly positioned and provides sufficient engagement with the lever handle assemblies.
Step 5: Position the Oval Rose Mounting Components
Align the 65 × 31 mm oval rose mounting components with the spindle opening and fixing positions.
Check that the mounting components sit correctly against the door surface.
Step 6: Secure the Lever Handle Assembly
Install the lever handle assemblies using the approved through-bolt or screw fixing arrangement.
The engineering drawing specifies M4 fixing screws.
Tighten the fixing components appropriately without damaging the door or handle assembly.
Step 7: Install the Oval Keyhole Escutcheons
If the selected configuration includes matching Euro profile oval keyhole escutcheons, position and install them according to the selected lock and cylinder specifications.
Step 8: Test the Door Handle
Operate the lever handles several times to verify smooth movement and correct latch retraction.
Check the lever return, spindle engagement and mounting stability.
Installation Note
The final installation procedure may vary according to the selected latch, mortise lock, door material and mounting hardware.
Buyers should confirm the complete installation accessories and approved fixing method before ordering.
Professional installation is recommended for commercial and construction project applications.
FACTORY CAPABILITY
DEGOL Hardware – Architectural Door Hardware Manufacturer & Export Supplier
Jiangmen Degol Hardware Co., Ltd. is a China-based architectural hardware manufacturer and supplier serving international wholesalers, importers, distributors and construction project buyers.
DEGOL welcomes wholesale sourcing and OEM/ODM cooperation inquiries for stainless steel door lever handles and related architectural hardware products.
Manufacturing and Product Supply
DEGOL supports architectural hardware product sourcing, manufacturing coordination, product inspection, packaging and export requirements.
The LH1017 can be considered for wholesale sourcing projects requiring straight tubular stainless steel door handles with compact oval mounting roses.
OEM & ODM Customization
DEGOL welcomes customization inquiries from hardware wholesalers, building material distributors and private-label customers.
Depending on technical feasibility and order requirements, customization discussions may include:
Custom logos and branding.
Alternative surface finishes.
Custom lever dimensions.
Custom oval rose configurations.
Matching escutcheon requirements.
Alternative mounting arrangements.
Private-label product packaging.
Customized carton labels.
Product development based on customer drawings or samples.
All customization options are subject to technical and commercial confirmation.
Product Quality Control
Quality control requirements may include verification of product dimensions, surface appearance, material specifications, assembly fit and packaging condition.
For project orders, customers can request available technical documentation and discuss relevant inspection or testing requirements before production approval.
International B2B Cooperation
DEGOL welcomes cooperation with architectural hardware importers, wholesalers, building material distributors and construction contractors.
The company can discuss product sourcing requirements for customers serving residential, hotel and commercial construction markets.
PACKAGING & EXPORT INFORMATION
DEGOL welcomes international wholesale orders and export inquiries for the LH1017 stainless steel straight tubular door lever handle on oval rose.
Product Packaging
Packaging arrangements can be discussed according to the order quantity, selected finish and customer requirements.
Packaging inquiries may include:
Individual protective product packaging.
Surface protection for stainless steel components.
Retail boxes and master cartons.
Private-label packaging.
Custom product labels.
Export carton markings.
Palletizing requirements.
Installation Accessories
The LH1017 engineering drawing specifies an 8 × 8 mm spindle and M4 fixing screws.
The actual included components, including handles, mounting roses, escutcheons, fixing screws and other installation accessories, should be confirmed in the final packing list.
Wholesale Order Information
Customers can contact DEGOL to confirm:
Minimum order quantity.
Sample availability.
Available stainless steel grades.
Surface finish availability.
Product configuration.
Wholesale pricing.
Production lead time.
Packaging requirements.
Export shipping arrangements.
International Export Support
DEGOL welcomes inquiries from architectural hardware importers and distributors serving South American and other international markets.
Export quotations can be discussed according to the order quantity, destination port and agreed trading terms.
Information Required for a Quotation
Product Model: LH1017.
Required Quantity: Specify the requested order volume.
Material Grade: Confirm the required stainless steel grade.
Surface Finish: Satin, Polished, PVD Gold, PVD Black or other requested finish.
Door Thickness: Confirm the installation requirements.
Lock Compatibility: Provide the selected lock specifications.
Packaging: Standard or private-label packaging.
Destination: Country and port.
Shipping Terms: FOB, CIF or other agreed Incoterms.
Final packing details, minimum order quantity, payment terms, production lead time and shipping arrangements are subject to quotation confirmation.
FAQ
Q1: What type of door handle is the LH1017?
The LH1017 is a stainless steel straight tubular door lever handle featuring a cylindrical Ø19 mm gripping section, compact oval mounting rose and coordinated Euro profile-style keyhole escutcheon design. It is intended for compatible residential, hotel and commercial interior door applications.
Q2: What are the dimensions of the LH1017 door lever handle?
The LH1017 features a 135 mm lever length, Ø19 mm lever diameter, 60 mm lever projection and 65 × 31 mm oval mounting rose with a thickness of 10 mm.
Q3: What is the difference between an oval rose door handle and a round rose door handle?
An oval rose door handle uses an elongated mounting plate rather than a circular one. The LH1017 features a compact 65 × 31 mm oval rose, creating a narrow, streamlined appearance suitable for modern architectural door hardware designs.
Q4: What door thickness is suitable for the LH1017?
The engineering drawing specifies a reference door thickness range of 35–55 mm. Buyers should confirm the final mounting hardware and spindle length for their door installation requirements.
Q5: What stainless steel grade is used for the LH1017?
The LH1017 is specified as a stainless steel door handle. The engineering drawing provides general information about stainless steel 304 and 201. Buyers should confirm the actual available material grade with DEGOL before ordering.
Q6: What surface finishes are available for the LH1017?
The engineering drawing illustrates satin stainless steel, polished stainless steel, PVD gold and PVD black finishes. Customers should contact DEGOL to confirm available finishes and any customization requirements.
Q7: Is the LH1017 compatible with mortise locks and Euro profile cylinders?
The LH1017 can be considered for compatible lever-operated latch or mortise lock systems. The drawing illustrates an 8 × 8 mm spindle and matching Euro profile-style oval escutcheon. Buyers must confirm lock follower dimensions, cylinder compatibility, fixing positions and required centre distances before ordering.
Q8: How is the LH1017 stainless steel door handle installed?
The LH1017 is designed for installation using a compatible 8 × 8 mm square spindle and M4 fixing hardware. The engineering drawing references through-bolt or screw fixing. Final installation requirements depend on the selected mounting configuration and door construction.
Q9: Can DEGOL provide OEM/ODM customization and wholesale pricing for the LH1017?
DEGOL welcomes OEM/ODM inquiries involving logos, surface finishes, packaging and product configurations. Buyers can contact the company to discuss sample availability, minimum order quantities, wholesale pricing and customization feasibility.
Q10: Can DEGOL supply LH1017 stainless steel door handles for South American wholesale markets?
DEGOL welcomes sourcing inquiries from architectural hardware importers, distributors and construction project buyers serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets. Customers can provide their required quantity, finish, destination country and shipping requirements to request a quotation.
CONTACT DEGOL – REQUEST A WHOLESALE QUOTE
Looking for a stainless steel straight tubular door lever handle on oval rose for your architectural hardware business, wholesale distribution network or construction project?
Contact DEGOL Hardware for product specifications, available surface finishes, sample inquiries, OEM/ODM customization and wholesale pricing.
Product Model: LH1017
Product Name: Stainless Steel Straight Tubular Door Lever Handle on Oval Rose for Modern Residential Hotel and Commercial Doors
Company: Jiangmen Degol Hardware Co., Ltd.
Website: https://www.degolhardware.com/
WhatsApp: +86 13725946499
WhatsApp Link: https://wa.me/8613725946499
Email: info@degolhardware.com
DEGOL welcomes cooperation with architectural hardware wholesalers, importers, building material distributors and construction project buyers.
For an accurate quotation, please provide your required quantity, preferred stainless steel grade, surface finish, lock compatibility requirements, packaging specifications and destination country.
Request Your LH1017 Stainless Steel Tubular Door Lever Handle on Oval Rose Wholesale Quote Today.