LH1030
Degol
| Availability: | |
|---|---|
| Quantity: | |
LH1030 – Satin Nickel Zinc Alloy Cylindrical Bar Door Lever Handle with Angular Square Neck on Round Rose for Modern Interior Doors
| Product Attribute | Specification |
|---|---|
| Model Number | LH1030 |
| Lever Length (L) | 127 mm |
| Lever Projection (P) | 69 mm |
| Cylindrical Grip Diameter | Ø22 mm |
| Round Rose Diameter | Ø52 mm |
| Rose Thickness | 9 mm (Specification Table; Verify Against Drawing) |
| Mounting Hole Distance | 38 mm (Drawing Reference) |
| Suitable Door Thickness | 35–55 mm |
| Square Spindle Size | 8 × 8 mm |
| Fixing Screws | M4, 2 pcs per side |
| Keyhole Type | Euro Profile |
| Handle Configuration | Lever Handle Pair with Matching Escutcheons Illustrated |
Technical Note: Dimensions are based on the supplied LH1030 zinc alloy engineering drawing. The specification table states a 9 mm rose thickness, while the side-view drawing also shows an 8 mm dimension near the mounting assembly. The exact dimension represented by the 8 mm callout should be confirmed. The 38 mm mounting-hole distance requires confirmation against an approved drilling template. Final mounting dimensions, fixing hardware and included accessories are subject to factory confirmation.
PRODUCT INTRODUCTION
The DEGOL LH1030 Satin Nickel Zinc Alloy Cylindrical Bar Door Lever Handle with Angular Square Neck on Round Rose is a contemporary architectural hardware product featuring a straight cylindrical gripping bar, distinctive angular connecting neck and coordinated round mounting rose.
Designed for modern residential, hospitality and selected commercial interior applications, the LH1030 combines minimalist tubular styling with clean geometric detailing.
Unlike conventional curved door lever handles, the LH1030 incorporates a straight cylindrical gripping section connected to the mounting rose through a defined square-section angular neck.
The transition between the angular neck and round gripping bar creates a distinctive combination of square and cylindrical geometry.
The reference product image features a satin nickel finish that highlights the brushed metallic appearance and clean linear structure.
Manufactured from zinc alloy, the LH1030 is a decorative door hardware option for contemporary interior hardware collections.
According to the supplied engineering drawing, the handle features a 127 mm lever length, 69 mm projection and Ø22 mm cylindrical gripping section.
The product incorporates a Ø52 mm round mounting rose.
The specification table identifies a 9 mm rose thickness and a 38 mm mounting-hole distance.
The installation specifications indicate compatibility with doors measuring 35–55 mm in thickness, using an 8 × 8 mm square spindle and M4 fixing screws, two per side.
The product illustration also shows matching round Euro profile escutcheons.
For architectural hardware wholesalers, importers, building material distributors and construction project procurement companies, the LH1030 offers a distinctive modern zinc alloy door handle design suitable for interior hardware collections.
Distinctive Angular Square Neck Design
The defining feature of the LH1030 is its angular square-section connecting neck.
Unlike conventional round tubular stems, the LH1030 incorporates a geometric connecting structure between the mounting rose and the cylindrical gripping bar.
The connecting section features clearly defined straight edges and a right-angled profile.
This design creates a visible contrast between the angular neck and the smooth round grip.
The result is a modern architectural appearance that distinguishes LH1030 from conventional cylindrical door levers.
Straight Cylindrical Bar Grip
The LH1030 features a straight horizontal cylindrical gripping section.
The engineering drawing specifies a grip diameter of Ø22 mm.
Its smooth round profile provides a simple contemporary appearance.
The gripping section has a flat circular outer end with subtle edge detailing visible in the reference image.
The straight cylindrical profile complements modern interior doors and geometric architectural hardware collections.
Satin Nickel Metallic Appearance
The reference LH1030 product features a satin nickel finish.
Its soft metallic silver appearance emphasizes the smooth cylindrical gripping bar and angular connecting structure.
Compared with polished chrome, satin nickel provides a more understated surface reflection.
This finish coordinates with contemporary furniture, neutral interior colors and modern architectural fittings.
Actual surface texture, color consistency, coating process and finish durability should be confirmed using approved production samples.
Zinc Alloy Construction
The LH1030 is manufactured from zinc alloy.
Zinc alloy is commonly used in decorative architectural hardware because it supports detailed casting, geometric forms and multiple decorative surface finishes.
The material enables the production of the handle's angular connecting neck, cylindrical grip and mounting components.
Depending on the manufacturing requirements, zinc alloy components may receive electroplating, painting or other suitable surface treatments.
Actual mechanical strength, durability and corrosion resistance depend on material composition, internal construction, surface treatment and operating conditions.
Coordinated Round Rose Design
The LH1030 incorporates a round mounting rose measuring Ø52 mm in diameter.
The technical specification table lists a rose thickness of 9 mm.
The circular rose creates a balanced appearance with the horizontal cylindrical grip.
Its rounded design also provides a visual contrast to the square-section connecting neck.
The exact rose thickness and concealed fixing arrangement should be confirmed using an approved technical drawing.
Matching Euro Profile Escutcheon
The supplied product illustration shows two matching round Euro profile escutcheons.
The escutcheons are intended for consideration with compatible Euro profile cylinder arrangements.
The reference image shows circular escutcheons with a silver metallic finish matching the lever handles.
The engineering drawing does not provide independently confirmed escutcheon dimensions.
Buyers should verify escutcheon diameter, thickness, fixing positions, keyhole geometry and package inclusion before ordering.
Decorative Surface Finish Options
The LH1030 engineering drawing illustrates five finish references.
Satin Nickel
A soft metallic silver finish with a satin appearance.
This is the reference finish shown in the product image.
Polished Chrome
A bright reflective silver finish with a mirror-like appearance.
Matte Black
A contemporary matte black finish suitable for minimalist architectural interiors.
Graphite Gray
A dark grey metallic finish suitable for modern interior hardware collections.
Satin Gold
A warm gold-toned metallic finish for decorative residential and hospitality interiors.
Finish Note: Satin Nickel is the reference finish. Other finishes are illustrated options. Actual availability, surface treatment specifications and approved color samples should be confirmed with DEGOL before ordering.
Key Product Features
Modern straight cylindrical bar lever design.
Distinctive angular square-section connecting neck.
Combination of square and round geometric elements.
Satin nickel reference finish.
Zinc alloy construction.
Ø22 mm cylindrical gripping section.
127 mm lever length.
69 mm lever projection.
Ø52 mm circular mounting rose.
Matching round Euro profile escutcheons illustrated.
38 mm mounting-hole distance listed in the technical table.
Suitable door thickness of 35–55 mm.
8 × 8 mm square spindle specification.
M4 fixing screws, two per side.
Five illustrated decorative finish options.
Suitable for compatible modern interior doors.
Wholesale and OEM/ODM sourcing inquiries welcomed.
APPLICATIONS
The LH1030 Satin Nickel Zinc Alloy Cylindrical Bar Door Lever Handle can be considered for architectural projects requiring straight tubular designs, geometric connecting details and contemporary metallic finishes.
Modern Residential Houses
The LH1030 provides a decorative door hardware option for contemporary residential houses and villas.
Its straight cylindrical grip and angular neck complement modern wooden doors, painted interior doors and minimalist furniture.
Apartments and Condominiums
The LH1030 can be considered for compatible apartment and condominium interior doors.
Its satin nickel appearance coordinates with neutral decoration, metallic fixtures and contemporary residential interiors.
Hotels and Hospitality Interiors
The LH1030 may be considered for selected hotel guest rooms, serviced apartments and boutique hospitality projects.
Its clean geometric profile provides a modern architectural appearance.
Hospitality project buyers should verify operational durability, locking compatibility and applicable building requirements before specification.
Office Buildings
The LH1030 can be considered for suitable private offices, meeting rooms and administrative interior doors.
The combination of angular neck geometry and cylindrical grip coordinates with contemporary office furniture and stainless-look architectural fittings.
Residential Construction Projects
The LH1030 is relevant to residential construction projects requiring coordinated door lever hardware.
Procurement teams should verify door preparation dimensions, fixing positions and lock compatibility before bulk ordering.
Interior Renovation Projects
The LH1030 can be considered for interior renovation projects involving the replacement of conventional door handles.
Installers should verify the existing spindle dimensions and mounting positions before fitting replacement hardware.
Architectural and Interior Design Projects
The LH1030 is relevant to interiors emphasizing clean horizontal lines, geometric contrasts and metallic finishes.
Its angular square neck provides a distinctive visual detail without excessive decoration.
Selected Commercial Interior Projects
The LH1030 may be considered for compatible commercial interior doors where the complete hardware assembly meets operational and project requirements.
Architectural Hardware Wholesale Distribution
The LH1030 is relevant to architectural hardware wholesalers, importers, building material distributors and professional hardware retailers.
Its geometric design provides a recognizable option for modern zinc alloy door hardware collections.
South American Wholesale Markets
DEGOL welcomes sourcing inquiries from architectural hardware wholesalers, importers and construction procurement companies serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets.
The LH1030 can be considered for compatible residential, hospitality and selected commercial interior door hardware collections.
Application Note
The LH1030 is primarily positioned for compatible interior door applications.
For exposed exterior, coastal, high-humidity, high-traffic, fire-rated, emergency-exit or accessibility-regulated applications, buyers should verify mechanical performance, coating specifications and applicable standards before selection.
SUITABLE DOOR TYPES
The DEGOL LH1030 Zinc Alloy Cylindrical Bar Door Lever Handle Set is specified for compatible doors measuring 35–55 mm in thickness.
Final suitability depends on door construction, mounting configuration and the selected locking mechanism.
Wooden Interior Doors
The LH1030 can be considered for compatible wooden interior doors in houses, apartments, hotels and offices.
Solid Timber Doors
Installation may be possible on solid timber doors where the thickness, fixing positions and locking hardware meet the approved product specifications.
Apartment Interior Doors
A contemporary decorative option for compatible bedroom, study and general apartment interior doors.
Hotel Interior Doors
The LH1030 may be considered for selected hotel and serviced apartment doors using compatible lever-operated locking systems.
Office and Meeting Room Doors
The product can be considered for office and meeting room doors where the complete hardware assembly meets project requirements.
Metal Interior Doors
Installation may be possible on properly prepared metal doors with suitable reinforcement and compatible hardware.
Door Compatibility Requirements
Before placing a wholesale or construction project order, buyers should verify:
Door thickness: 35–55 mm.
Square spindle size: 8 × 8 mm.
Fixing screw specification: M4.
Fixing screw quantity: 2 pcs per side.
Required spindle length.
Lock follower compatibility.
Selected latch or mortise lock mechanism.
Door material and construction.
Round rose mounting positions.
Mounting-hole distance against the approved drilling template.
Lever orientation and operating clearance.
Euro profile cylinder compatibility.
Applicable local installation and building standards.
For South American construction projects, compatibility with locally specified mortise locks, cylinders and door preparation dimensions should be verified before bulk purchasing.
TECHNICAL DRAWINGS & LOCK COMPATIBILITY
The DEGOL LH1030 Door Lever Handle Set features a straight cylindrical grip, angular connecting neck, circular mounting rose and matching Euro profile escutcheons illustrated in the supplied product image.
The engineering drawing provides the principal product dimensions and installation specifications.
Key Engineering Dimensions
Lever Length (L): 127 mm.
Lever Projection (P): 69 mm.
Cylindrical Grip Diameter: Ø22 mm.
Round Rose Diameter: Ø52 mm.
Rose Thickness: 9 mm in the specification table; confirm the 8 mm side-view callout.
Mounting Hole Distance: 38 mm in the specification table; verify the fixing centres.
Suitable Door Thickness: 35–55 mm.
Square Spindle Size: 8 × 8 mm.
Fixing Screws: M4, 2 pcs per side.
Keyhole Type: Euro Profile.
Angular Square Neck Geometry
The LH1030 incorporates an angular connecting section between the circular mounting rose and horizontal cylindrical gripping bar.
The neck features defined straight surfaces and a right-angled transition.
The engineering drawing illustrates the general profile but does not provide every individual neck dimension.
Buyers requiring detailed neck dimensions, angles or assembly clearances should request an approved technical drawing.
Cylindrical Lever Geometry
The LH1030 features a 127 mm lever length and 69 mm projection.
The gripping section is specified as Ø22 mm.
Its horizontal cylindrical form creates a clean linear appearance.
The drawing also illustrates the transition from the square neck to the round gripping bar.
Buyers requiring detailed cross-sectional specifications should request the final product drawing.
Round Rose Mounting Design
The LH1030 features a circular mounting rose with a diameter of Ø52 mm.
The technical specification table lists a rose thickness of 9 mm.
An 8 mm dimension is also shown near the rose assembly in the side-view diagram.
The exact meaning of this dimension should be clarified before technical approval.
Mounting Hole Distance
The technical specification table lists a mounting-hole distance of 38 mm.
The factory-approved drilling template should be used to confirm the actual fixing-hole centres, mounting method and required door preparation.
Euro Profile Escutcheon
The product illustration shows matching round Euro profile escutcheons.
They are intended for consideration with compatible Euro profile cylinder arrangements.
The selected escutcheon dimensions, hole configuration, fixing positions and package inclusion require confirmation.
Square Spindle Compatibility
The LH1030 engineering drawing specifies an 8 × 8 mm square spindle.
Before installation, buyers should confirm:
Square spindle dimensions.
Required spindle length.
Lock follower compatibility.
Spindle engagement.
Door thickness.
Mounting configuration.
Lever return requirements.
Fixing Screw Requirements
The engineering drawing specifies M4 fixing screws, two per side.
Final screw lengths and fastening arrangements should be confirmed according to the actual door thickness and mounting configuration.
Mortise Lock and Latch Compatibility
The LH1030 drawing illustrates a Euro profile keyhole arrangement.
However, it does not specify a particular mortise lock model, latch mechanism, backset or PZ centre distance.
Compatibility with the selected mortise lock, latch and cylinder should be verified before ordering.
A mortise lock body or cylinder should not be assumed to be included unless specifically stated in the quotation.
Zinc Alloy Material Characteristics
The LH1030 is manufactured from zinc alloy.
Decorative Casting Flexibility
Zinc alloy supports the production of defined geometric shapes, angular connecting components and decorative mounting hardware.
Surface Finishing Compatibility
Zinc alloy components can receive suitable electroplating, painting and coating treatments depending on manufacturing requirements.
Mechanical Performance
Product durability depends on material composition, internal construction, assembly quality and operating conditions.
Corrosion Resistance
Corrosion resistance depends on coating quality, surface treatment and environmental exposure.
Buyers specifying the product for humid or coastal environments should verify suitable corrosion testing requirements.
Surface Finish References
| Finish | Appearance | Availability |
|---|---|---|
| Satin Nickel | Soft Satin Silver | Reference Finish |
| Polished Chrome | Bright Mirror Silver | Confirmation Required |
| Matte Black | Matte Black | Confirmation Required |
| Graphite Gray | Dark Metallic Grey | Confirmation Required |
| Satin Gold | Warm Metallic Gold | Confirmation Required |
Actual surface finish availability, coating specifications and approved color samples should be confirmed with DEGOL before ordering.
Technical Note
All dimensions and installation specifications are based on the supplied LH1030 zinc alloy engineering drawing.
Final manufacturing tolerances, rose thickness, mounting-hole positions, surface treatment, lock compatibility and included accessories should be confirmed before project approval or wholesale purchasing.
INSTALLATION GUIDE
The LH1030 Zinc Alloy Cylindrical Bar Door Lever Handle Set should be installed according to the approved engineering drawing and selected locking mechanism.
The following steps provide general installation guidance.
Step 1: Confirm Door Thickness
Measure the door thickness and verify that it falls within the specified 35–55 mm range.
Step 2: Check Lock Compatibility
Confirm that the selected latch or mortise lock supports an 8 × 8 mm square spindle.
Verify the lock follower, spindle length and mounting positions.
Step 3: Verify the Mounting Layout
The engineering specification table lists a 38 mm mounting-hole distance.
Verify this dimension against the factory-approved drilling template before preparing the door.
Step 4: Prepare the Door
Mark the spindle opening and fixing positions according to the approved mounting template.
Ensure the door preparation matches the selected locking mechanism.
Step 5: Install the Lock Mechanism
Fit the compatible latch or mortise lock into the prepared door.
Secure it according to the lock manufacturer's instructions.
Step 6: Insert the Square Spindle
Insert the 8 × 8 mm square spindle through the compatible lock follower.
Ensure sufficient spindle engagement on both sides of the door.
Step 7: Position the Round Rose Assemblies
Align the circular mounting components with the prepared spindle opening and fixing positions.
Ensure that both mounting roses sit correctly against the door surfaces.
Step 8: Secure the Fixing Hardware
Install the specified M4 fixing screws according to the approved mounting configuration.
The engineering drawing indicates two screws per side.
Confirm suitable screw lengths for the selected door thickness.
Step 9: Install the Lever Handles and Escutcheons
Fit the cylindrical bar lever assemblies onto the square spindle.
Align the square connecting necks and horizontal grips correctly.
Secure the handles using the approved fastening components.
Where included, install the matching Euro profile escutcheons according to the selected cylinder arrangement.
Step 10: Test Handle Operation
Operate both handles several times.
Check for smooth movement, secure mounting, proper latch retraction and correct lever return.
Installation Note
These instructions provide general installation guidance only.
Final installation requirements depend on the approved product configuration, selected locking mechanism and door construction.
Professional installation is recommended for commercial and construction projects.
FACTORY CAPABILITY
DEGOL Hardware – Zinc Alloy Door Handle Manufacturer & Export Supplier in China
Jiangmen Degol Hardware Co., Ltd. is a China-based architectural hardware company serving international wholesalers, importers, distributors and construction procurement businesses.
For buyers searching for a China door handle factory or zinc alloy door handle manufacturer in China, DEGOL welcomes sourcing inquiries for modern architectural door hardware, product specifications and OEM/ODM cooperation.
Geometric Zinc Alloy Door Hardware Supply
The LH1030 is designed for buyers seeking modern zinc alloy door lever handles featuring cylindrical gripping bars and angular connecting structures.
Its satin nickel reference finish, square neck geometry and circular mounting rose provide a recognizable design for contemporary architectural hardware collections.
International buyers can discuss material requirements, available decorative finishes, mounting specifications and wholesale purchasing arrangements with DEGOL.
OEM & ODM Customization
DEGOL welcomes OEM and ODM inquiries from architectural hardware wholesalers, importers, distributors and private-label brands.
Depending on technical feasibility and commercial requirements, customization discussions may include:
Custom product logos and branding.
Alternative satin nickel finishes.
Customized polished chrome, matte black, graphite gray and satin gold finishes.
Modified lever lengths.
Alternative cylindrical grip dimensions.
Angular neck geometry adjustments.
Round rose modifications.
Matching escutcheon requirements.
Customized packaging.
Private-label carton markings.
Product development based on customer drawings or samples.
All customization requests are subject to technical review, tooling feasibility and commercial confirmation.
Quality Control Requirements
For wholesale and construction project orders, buyers may discuss:
Zinc alloy material specifications.
Lever dimensional accuracy.
Cylindrical grip diameter.
Angular neck geometry.
Surface finish consistency.
Coating uniformity.
Round rose dimensions.
Spindle compatibility.
Fixing-hole positions.
Handle assembly performance.
Fixing hardware specifications.
Packaging protection.
Project-specific inspection arrangements.
Available quality documentation, inspection reports and testing arrangements should be confirmed before production approval.
International Wholesale Cooperation
DEGOL welcomes inquiries from architectural hardware wholesalers, door handle importers, building material distributors, hardware retailers, construction procurement companies and private-label brands.
South American Market Cooperation
DEGOL welcomes sourcing inquiries from businesses serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets.
Customers can provide their required quantity, preferred surface finish, packaging specifications and destination country to discuss wholesale purchasing arrangements.
PACKAGING & EXPORT INFORMATION
DEGOL welcomes international wholesale and export inquiries for the LH1030 Satin Nickel Zinc Alloy Cylindrical Bar Door Lever Handle Set.
Product Packaging
Packaging arrangements may be discussed according to the selected product configuration, order quantity and customer requirements.
Possible packaging options include:
Individual protective packaging.
Protection for satin nickel surfaces.
Protective wrapping for cylindrical gripping sections.
Protection for angular connecting necks.
Separate protection for round mounting roses.
Separate packaging for matching escutcheons.
Retail product boxes.
Export master cartons.
OEM branded packaging.
Private-label carton markings.
Export palletizing arrangements.
Installation Accessories
The LH1030 illustration shows a pair of lever handles and matching round Euro profile escutcheons.
The technical drawing specifies an 8 × 8 mm square spindle and M4 fixing screws, two per side.
Customers should confirm whether the selected package includes:
Two cylindrical bar lever assemblies.
Round mounting roses.
Matching Euro profile escutcheons.
Square spindle.
M4 fixing screws.
Additional mounting components.
Installation accessories.
Installation instructions.
A mortise lock body or cylinder should not be assumed to be included unless specified in the quotation.
Wholesale Order Information
Customers can contact DEGOL to discuss:
Minimum order quantity.
Sample availability.
Available decorative finishes.
Wholesale pricing.
OEM/ODM customization.
Production lead time.
Product configurations.
Packaging requirements.
Inspection arrangements.
International shipping options.
Export and Shipping
DEGOL welcomes export inquiries from international architectural hardware wholesalers and importers.
Customers can request quotations according to order quantity, destination country and preferred shipping terms.
FOB, CIF and other applicable Incoterms may be discussed subject to commercial confirmation.
Information Required for an Accurate Wholesale Quotation
Product Model: LH1030.
Product Type: Cylindrical Bar Zinc Alloy Door Lever Handle Set.
Material: Zinc Alloy.
Surface Finish: Satin Nickel or Requested Finish.
Order Quantity: Required Number of Sets.
Lever Length: 127 mm.
Lever Projection: 69 mm.
Grip Diameter: Ø22 mm.
Rose Diameter: Ø52 mm.
Door Thickness: 35–55 mm.
Square Spindle: 8 × 8 mm.
Fixing Screws: M4.
Lock Type: Customer-Specified Compatible Latch or Mortise Lock.
Escutcheons: Required Product Configuration.
Customization: OEM/ODM Requirements.
Packaging: Standard or Private-Label.
Destination: Country and Port.
Shipping Terms: Preferred Incoterms.
Final pricing, MOQ, packaging, payment terms, production lead times and shipping arrangements are subject to official quotation confirmation.
FAQ
Q1: What material is the DEGOL LH1030 door lever handle made from?
The DEGOL LH1030 shown in this engineering drawing is manufactured from zinc alloy. The reference product features a satin nickel surface finish and a straight cylindrical gripping section.
Q2: What makes the LH1030 different from conventional door lever handles?
The LH1030 features a straight cylindrical bar connected to the mounting rose through an angular square-section neck. This combination creates a distinctive geometric appearance compared with conventional curved or fully tubular handles.
Q3: What are the main dimensions of the LH1030 door handle?
The engineering drawing specifies a 127 mm lever length, 69 mm projection, Ø22 mm cylindrical grip and Ø52 mm mounting rose. The specification table lists a 9 mm rose thickness and 38 mm mounting-hole distance, subject to final technical confirmation.
Q4: What surface finishes are available for the LH1030?
The reference product features a satin nickel finish. The engineering drawing also illustrates polished chrome, matte black, graphite gray and satin gold as alternative options. Actual availability should be confirmed with DEGOL.
Q5: What door thickness is suitable for the LH1030?
The engineering drawing specifies a suitable door thickness range of 35–55 mm, subject to the selected mounting configuration and locking mechanism.
Q6: What spindle size does the LH1030 use?
The LH1030 engineering drawing specifies an 8 × 8 mm square spindle. Buyers should confirm the required spindle length and compatibility with their selected lock follower.
Q7: Is the LH1030 compatible with Euro profile mortise locks?
The engineering drawing identifies a Euro profile keyhole type and illustrates matching keyhole escutcheons. Compatibility with a specific mortise lock, cylinder and mounting arrangement should be verified before ordering.
Q8: Does the LH1030 include fixing screws and matching escutcheons?
The drawing specifies M4 fixing screws, two per side, and illustrates matching round Euro profile escutcheons. Actual included components and packaging quantities should be confirmed in the final quotation.
Q9: Can DEGOL provide OEM/ODM customization and wholesale pricing for LH1030?
DEGOL welcomes OEM/ODM and wholesale sourcing inquiries. Buyers can discuss custom branding, decorative finishes, dimensions, packaging, samples, minimum order quantities and wholesale pricing, subject to technical feasibility and commercial confirmation.
Q10: Can DEGOL supply LH1030 zinc alloy door handles to South American wholesalers and construction buyers?
DEGOL welcomes inquiries from architectural hardware importers, distributors and construction procurement companies serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets. Buyers can provide their required quantity, preferred finish, packaging specifications and destination country to request a wholesale quotation.
CONTACT DEGOL – REQUEST A WHOLESALE QUOTE
Looking for a satin nickel zinc alloy cylindrical bar door lever handle with an angular square neck and round rose for your architectural hardware collection, wholesale distribution business or construction project?
Contact DEGOL Hardware for product specifications, technical drawings, available surface finishes, sample information, OEM/ODM customization inquiries and wholesale pricing.
Product Model: LH1030
Product Name: Satin Nickel Zinc Alloy Cylindrical Bar Door Lever Handle with Angular Square Neck on Round Rose for Modern Interior Doors
Material: Zinc Alloy
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
WhatsApp Link: https://wa.me/8613725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Whether you are an architectural hardware wholesaler, importer, building material distributor or construction project buyer, DEGOL welcomes your product sourcing inquiries.
For faster quotation processing, please provide your required order quantity, preferred surface finish, door thickness, lock compatibility requirements, packaging specifications and destination country.
Request Your LH1030 Satin Nickel Zinc Alloy Cylindrical Bar Door Lever Handle Wholesale Quote Today.