LH1031
Degol
| Availability: | |
|---|---|
| Quantity: | |
ES3001 – Oval Stainless Steel Euro Profile Keyhole Escutcheon Plate with Satin Brushed Finish for Wooden and Commercial Interior Doors
| Product Attribute | Specification |
|---|---|
| Model Number | ES3001 |
| Plate Length (L) | 64 mm |
| Plate Width (W) | 32 mm |
| Plate Thickness (T) | 8 mm |
| Top and Bottom End Radius | R16 mm |
| Upper Keyhole Diameter | Ø16 mm |
| Lower Keyhole Diameter | Ø14 mm |
| Keyhole Neck Width | 12 mm |
| Keyhole Center Distance | 31 mm |
| Keyhole Type | Euro Profile |
| Applicable Lock | Compatible Euro Mortise Lock and Cylinder Arrangement |
| Mounting Method | To Be Confirmed |
| Fixing Hardware | To Be Confirmed |
Technical Note: All listed dimensions are based on the supplied ES3001 engineering drawing. The 31 mm measurement is labeled as the keyhole center distance in the technical drawing and must not be confused with the lever-to-cylinder PZ centre distance of a mortise lock. Mounting-hole locations, fixing components, stainless steel grade and actual cylinder compatibility require confirmation before ordering.
PRODUCT INTRODUCTION
The DEGOL ES3001 Oval Stainless Steel Euro Profile Keyhole Escutcheon Plate is a decorative architectural door hardware component featuring a slim oval body, rounded ends, Euro profile keyhole opening and satin brushed stainless steel appearance.
Designed to complement compatible door lock and lever handle assemblies, the ES3001 provides a clean and coordinated decorative finish around a Euro profile cylinder opening.
Unlike conventional round or square keyhole escutcheons, the ES3001 features a vertical elongated oval shape measuring 64 mm in length and 32 mm in width.
Its rounded upper and lower ends incorporate an R16 profile, creating a balanced capsule-shaped silhouette.
The plate has a thickness of 8 mm, giving it a defined edge profile while maintaining a compact decorative appearance.
The reference product image shows a satin brushed stainless steel surface with fine directional brushing.
This finish complements contemporary door handles, stainless steel lever sets and coordinated metallic door hardware.
Manufactured from stainless steel, the ES3001 provides a decorative solution for compatible residential, hospitality and commercial interior doors.
The technical drawing illustrates a Euro profile keyhole with an upper diameter of Ø16 mm, lower diameter of Ø14 mm, neck width of 12 mm and a labeled keyhole center distance of 31 mm.
The engineering information identifies Euro mortise locks as the intended lock category.
However, compatibility with a particular cylinder or lock model must be confirmed against the manufacturer's approved technical drawing.
For architectural hardware wholesalers, door hardware importers, construction project procurement companies and professional hardware distributors, the ES3001 offers a compact oval stainless steel escutcheon option for modern door hardware collections.
Slim Oval Escutcheon Design
The defining feature of the ES3001 is its vertically oriented oval design.
The plate measures 64 × 32 mm.
Its upper and lower ends have a radius of R16.
This combination creates a smooth elongated profile without sharp corners.
Compared with square decorative escutcheons, the oval ES3001 introduces softer geometric lines.
Its compact dimensions make it suitable for consideration in coordinated architectural hardware collections.
Euro Profile Keyhole Opening
The ES3001 features a Euro profile keyhole opening.
The engineering drawing specifies:
Upper Keyhole Diameter: Ø16 mm.
Lower Keyhole Diameter: Ø14 mm.
Keyhole Neck Width: 12 mm.
Keyhole Center Distance: 31 mm.
These measurements describe the illustrated keyhole geometry.
The exact opening must be checked against the selected Euro profile cylinder and installation requirements.
Satin Brushed Stainless Steel Surface
The reference ES3001 product features a satin brushed stainless steel finish.
The brushed surface creates a soft metallic silver appearance.
Compared with polished stainless steel, the satin finish provides lower reflectivity and a more understated decorative look.
This appearance coordinates with modern stainless steel door lever handles, lock plates and other architectural fittings.
Actual brushing direction, surface texture and finish consistency should be confirmed using approved samples.
Stainless Steel Construction
The ES3001 is manufactured from stainless steel.
Stainless steel is commonly selected for architectural door hardware due to its mechanical characteristics and corrosion resistance under appropriate conditions.
The material supports the production of compact decorative lock plates with smooth edges and defined keyhole openings.
The exact stainless steel grade is not identified in the supplied drawing.
Customers requiring SUS304, SUS316 or another specified grade should confirm material availability before ordering.
Actual corrosion resistance depends on material grade, surface processing and operating environment.
8 mm Plate Thickness
The ES3001 plate thickness is 8 mm.
The drawing illustrates a straight side profile.
The plate thickness should be considered when evaluating cylinder projection, installation clearance and decorative fit.
The actual rear mounting structure is not detailed in the supplied engineering drawing.
Customers requiring specific installation clearances should request approved mounting details.
Coordinated Door Hardware Appearance
The ES3001 can be considered as a matching decorative component for compatible stainless steel door lever handle collections.
Its oval design is particularly suitable for hardware sets requiring a softer visual profile than square or circular escutcheons.
The reference satin brushed stainless steel finish can coordinate with compatible brushed metallic handles and lock components.
Matching appearance does not independently establish mechanical or dimensional compatibility.
Decorative Surface Finish Options
The ES3001 engineering drawing illustrates four finish options.
Satin Brushed Stainless Steel (SSS)
A soft brushed silver metallic appearance.
This is the reference finish shown in the product image.
Polished Stainless Steel (PSS)
A bright mirror-like stainless steel appearance.
Matte Black (MBK)
A contemporary matte black decorative finish.
Satin Gold (SG)
A warm satin gold metallic appearance suitable for decorative architectural hardware.
Finish Note: Satin Brushed Stainless Steel is the reference finish. Other finishes are illustrated options. Actual finish availability, coating processes, material grade and approved samples should be confirmed with DEGOL.
Key Product Features
Slim vertical oval escutcheon design.
Euro profile keyhole opening.
Stainless steel construction.
Satin brushed stainless steel reference finish.
64 mm overall plate length.
32 mm plate width.
8 mm plate thickness.
R16 rounded end profile.
Ø16 mm upper keyhole dimension.
Ø14 mm lower keyhole dimension.
12 mm keyhole neck width.
31 mm labeled keyhole center distance.
Smooth oval decorative appearance.
Four illustrated surface finish options.
Intended for compatible Euro mortise lock arrangements.
Suitable for consideration with coordinated interior door hardware.
Wholesale and OEM/ODM inquiries welcomed.
APPLICATIONS
The DEGOL ES3001 Oval Stainless Steel Euro Profile Keyhole Escutcheon can be considered for architectural projects requiring compact decorative cylinder covers and coordinated modern door hardware.
Modern Residential Houses
The ES3001 provides a decorative keyhole cover option for compatible interior doors in contemporary houses and villas.
Its satin brushed surface complements modern door handles and minimalist interior decoration.
Apartments and Condominiums
The ES3001 can be considered for apartment and condominium doors fitted with compatible Euro profile lock cylinders.
Its narrow oval shape provides a simple decorative treatment around the cylinder opening.
Hotels and Hospitality Interiors
The ES3001 may be considered for selected hotel guest rooms, serviced apartments and hospitality interior door hardware arrangements.
Project buyers should confirm the selected lock cylinder dimensions and applicable door hardware requirements.
Office Buildings
The ES3001 can be considered for compatible office, meeting room and administrative interior doors.
Its brushed stainless steel appearance coordinates with modern office hardware collections.
Residential Construction Projects
The ES3001 is relevant to residential projects requiring coordinated Euro profile cylinder escutcheons.
Construction procurement teams should confirm lock compatibility, fixing positions and surface finishes before bulk ordering.
Interior Renovation Projects
The ES3001 may be used as a decorative replacement component where the new escutcheon is compatible with the existing cylinder opening and mounting arrangement.
Existing fixing holes and decorative coverage should be checked before installation.
Architectural Hardware Collections
The ES3001 can be considered as part of coordinated door hardware product ranges featuring stainless steel handles, mortise locks and cylinder accessories.
Selected Commercial Interior Doors
The ES3001 may be considered for suitable commercial interior door assemblies where the escutcheon and complete locking system meet project requirements.
Architectural Hardware Wholesale Distribution
The ES3001 is relevant to hardware wholesalers, door hardware importers, distributors and retailers seeking compact decorative lock accessories.
South American Wholesale Markets
DEGOL welcomes sourcing inquiries from architectural hardware importers, building material distributors and construction procurement companies serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets.
The ES3001 can be considered for compatible residential, hospitality and commercial interior door hardware collections.
Application Note
The ES3001 is a decorative keyhole escutcheon and is not a complete lock mechanism or security cylinder protector.
For fire-rated, exterior, security-rated, emergency-exit or other regulated installations, buyers should confirm the requirements of the complete door and lock assembly.
SUITABLE DOOR TYPES
The DEGOL ES3001 Stainless Steel Euro Profile Escutcheon Plate is intended for doors equipped with compatible Euro profile cylinder locking arrangements.
Its suitability depends on the selected cylinder, door preparation, mounting hardware and installation clearances.
Wooden Interior Doors
The ES3001 can be considered for wooden doors with compatible Euro profile mortise locks.
Solid Timber Doors
Installation may be possible on properly prepared solid timber doors fitted with matching cylinder locking mechanisms.
Apartment Interior Doors
The ES3001 can be considered for apartment doors requiring a decorative oval cylinder escutcheon.
Hotel Interior Doors
The product may be considered for suitable hospitality door hardware assemblies using compatible Euro profile cylinders.
Office and Meeting Room Doors
The ES3001 may be installed on appropriate office doors when its keyhole and fixing details match the lock hardware.
Metal Interior Doors
Installation may be possible on properly prepared metal doors with suitable mounting provisions.
Door Compatibility Requirements
Before placing a wholesale or construction project order, buyers should verify:
Euro profile cylinder shape.
Selected mortise lock model.
Cylinder projection and clearance.
Escutcheon plate size: 64 × 32 mm.
Plate thickness: 8 mm.
Keyhole opening dimensions.
Keyhole alignment.
Fixing positions and installation method.
Door material and surface preparation.
Compatibility with adjacent lever handle roses.
Required escutcheon quantity per door.
Applicable local installation requirements.
Compatibility Note
A compatible Euro profile keyhole opening does not automatically guarantee compatibility with every Euro cylinder or mortise lock.
Customers should confirm the selected lock and cylinder dimensions against the approved ES3001 technical drawing.
TECHNICAL DRAWINGS & LOCK COMPATIBILITY
The DEGOL ES3001 Euro Profile Keyhole Escutcheon features a slim oval plate with rounded ends and a central Euro profile opening.
The supplied engineering drawing illustrates front, side and isometric views.
Key Engineering Dimensions
Plate Length (L): 64 mm.
Plate Width (W): 32 mm.
Plate Thickness (T): 8 mm.
End Radius (R): R16 mm.
Upper Keyhole Diameter: Ø16 mm.
Lower Keyhole Diameter: Ø14 mm.
Keyhole Neck Width: 12 mm.
Keyhole Center Distance: 31 mm.
Keyhole Type: Euro Profile.
Applicable Lock Category: Euro Mortise Lock.
Oval Plate Geometry
The ES3001 has a vertically oriented oval shape.
Its overall dimensions are 64 × 32 mm.
The upper and lower ends are rounded with an R16 profile.
This creates a symmetrical capsule-shaped decorative plate.
Plate Thickness
The side view identifies an 8 mm plate thickness.
The drawing does not identify a separate rear mounting plate thickness.
Final mounting geometry should be checked with the manufacturer.
Euro Profile Keyhole Geometry
The front view illustrates the upper circular part of the keyhole, the connecting neck and the lower rounded opening.
The supplied dimensions include Ø16 mm for the upper section, Ø14 mm for the lower section and a 12 mm neck width.
The keyhole center distance is labeled as 31 mm.
These dimensions describe the illustrated opening geometry and should be verified before manufacturing or installation.
Keyhole Center Distance Clarification
The 31 mm dimension refers to the keyhole geometry shown in the drawing.
It is not the PZ centre distance between a door lever spindle and a cylinder.
Buyers should not use this measurement as a substitute for the lock manufacturer's PZ specification.
Euro Mortise Lock Compatibility
The supplied engineering information identifies Euro mortise locks as the applicable lock category.
Before ordering, confirm:
Euro profile cylinder geometry.
Selected lock and cylinder model.
Cylinder projection.
Keyhole clearance.
Escutcheon alignment.
Mounting method.
Available fixing space.
Door surface preparation.
The drawing does not provide a specific lock brand, model number or fastening system.
Mounting and Fixing Compatibility
The supplied engineering drawing does not identify screw-hole positions, fixing screw sizes or a detailed rear mounting mechanism.
Therefore, these specifications should be confirmed rather than assumed.
Customers requiring factory drilling templates or installation specifications should request an approved technical drawing.
Stainless Steel Material Characteristics
The ES3001 is manufactured from stainless steel.
Decorative Surface Quality
Stainless steel provides a clean metallic appearance suitable for decorative architectural fittings.
Dimensional Stability
The finished plate geometry depends on the selected material grade and manufacturing process.
Corrosion Resistance
Corrosion resistance depends on stainless steel grade, surface finish and operating environment.
Material Grade Confirmation
The drawing does not specify a particular stainless steel grade.
Customers requiring specific material grades should confirm the available specifications and supporting documentation.
Surface Finish References
| Surface Finish | Appearance | Availability |
|---|---|---|
| Satin Brushed Stainless Steel (SSS) | Brushed Silver | Reference Finish |
| Polished Stainless Steel (PSS) | Mirror Silver | Confirmation Required |
| Matte Black (MBK) | Matte Black | Confirmation Required |
| Satin Gold (SG) | Warm Gold | Confirmation Required |
Technical Note
All engineering dimensions are based on the supplied ES3001 technical drawing.
Final material grade, manufacturing tolerances, mounting method, surface finish, lock compatibility and included accessories should be confirmed before project approval or wholesale purchasing.
INSTALLATION GUIDE
The ES3001 Stainless Steel Oval Euro Profile Keyhole Escutcheon should be installed according to the approved mounting instructions and selected cylinder locking mechanism.
The following steps provide general installation guidance.
Step 1: Confirm Lock Type
Check that the door uses a compatible Euro profile cylinder and mortise lock configuration.
Step 2: Verify Escutcheon Dimensions
Confirm that the 64 × 32 mm escutcheon fits the intended door surface and provides adequate clearance.
Step 3: Check Keyhole Geometry
Compare the cylinder shape and opening dimensions with the approved ES3001 technical drawing.
Step 4: Inspect Door Preparation
Check the existing cylinder opening and surrounding door surface.
Ensure there is adequate space for the oval plate.
Step 5: Confirm the Fixing Method
Obtain the approved installation specification for the supplied escutcheon.
Do not assume screw-hole positions or fastening methods from the product's external appearance.
Step 6: Position the Escutcheon
Align the Euro profile opening with the selected cylinder arrangement.
Ensure that the plate is vertically positioned.
Step 7: Secure the Escutcheon
Install the escutcheon using the approved fixing components.
Do not overtighten mounting hardware or damage the decorative surface.
Step 8: Check Cylinder Clearance
Confirm that the decorative plate does not interfere with the key or cylinder operation.
Step 9: Inspect the Surface Finish
Check that the satin brushed stainless steel surface remains clean and free from installation damage.
Step 10: Test the Lock
Insert the correct key and test the lock according to the lock manufacturer's instructions.
Confirm proper cylinder operation and escutcheon alignment.
Installation Note
These instructions are general guidance only.
The fixing method is not specified in the supplied engineering drawing.
Installation should follow the approved ES3001 mounting instructions and the selected lock manufacturer's requirements.
FACTORY CAPABILITY
DEGOL Hardware – Stainless Steel Door Escutcheon Manufacturer & Architectural Hardware Supplier in China
Jiangmen Degol Hardware Co., Ltd. is a China-based architectural hardware company serving international wholesalers, importers, distributors and construction procurement businesses.
For international buyers searching for a China door hardware factory or stainless steel escutcheon manufacturer in China, DEGOL welcomes product sourcing, technical specification and OEM/ODM cooperation inquiries.
Stainless Steel Door Lock Accessory Supply
The ES3001 is designed for buyers seeking decorative stainless steel escutcheon plates for compatible Euro profile cylinder arrangements.
Its compact oval profile, brushed finish and precisely defined keyhole shape make it relevant to coordinated architectural hardware collections.
International buyers can discuss material grades, surface finishes, mounting configurations and wholesale requirements with DEGOL.
OEM & ODM Customization
DEGOL welcomes OEM and ODM inquiries from architectural hardware wholesalers, importers, distributors and private-label brands.
Depending on technical feasibility, customization discussions may include:
Custom logo and branding.
Specified stainless steel grades.
Alternative satin brushed finishes.
Polished stainless steel finishes.
Matte black coating options.
Satin gold decorative finishes.
Modified escutcheon dimensions.
Alternative oval plate profiles.
Customized keyhole geometry.
Project-specific fixing requirements.
Matching door lever handle accessories.
Customized product packaging.
Private-label carton markings.
Product development based on customer drawings or samples.
All customization requests are subject to technical review and commercial confirmation.
Quality Control Requirements
For wholesale and construction project orders, customers may discuss:
Stainless steel material verification.
Overall plate length and width.
Plate thickness consistency.
Rounded-end dimensional accuracy.
Keyhole opening dimensions.
Keyhole edge finishing.
Surface brushing consistency.
Decorative coating appearance.
Mounting compatibility.
Packaging protection.
Project-specific inspection requirements.
Available quality reports, material documentation and testing arrangements should be confirmed before production approval.
International Wholesale Cooperation
DEGOL welcomes inquiries from door hardware wholesalers, architectural hardware importers, lock accessory distributors, building material suppliers, professional hardware retailers and construction procurement companies.
South American Market Cooperation
DEGOL welcomes sourcing inquiries from businesses serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets.
Customers can provide their preferred material grade, finish, required quantity, mounting requirements and destination country to discuss wholesale purchasing arrangements.
PACKAGING & EXPORT INFORMATION
DEGOL welcomes international wholesale inquiries for the ES3001 Oval Stainless Steel Euro Profile Keyhole Escutcheon Plate.
Product Packaging
Packaging arrangements can be discussed according to product configuration, quantity and customer requirements.
Possible packaging options include:
Individual protective sleeves.
Protective wrapping for brushed stainless steel surfaces.
Scratch-resistant separators.
Small accessory cartons.
Pair packaging where requested.
Retail product boxes.
Export master cartons.
OEM branded packaging.
Private-label carton markings.
Export palletizing arrangements.
Packaging Configuration
The supplied engineering drawing illustrates a single escutcheon plate.
Buyers should confirm whether the commercial package is supplied individually, in pairs or as part of a coordinated door hardware set.
Fixing Accessories
The supplied drawing does not specify a fixing screw or mounting accessory configuration.
Customers should confirm whether their selected package includes:
Individual oval escutcheon plate.
Matching second escutcheon, if required.
Mounting components.
Fixing screws or other approved fasteners.
Installation instructions.
Protective packaging.
A Euro profile lock cylinder, mortise lock body or door lever handle should not be assumed to be included.
Wholesale Order Information
Customers can contact DEGOL to discuss:
Minimum order quantity.
Sample availability.
Stainless steel material grade.
Surface finish options.
Wholesale pricing.
OEM/ODM customization.
Production lead time.
Mounting configurations.
Packaging requirements.
Quality inspection arrangements.
International shipping options.
Export and Shipping
DEGOL welcomes export inquiries from international architectural hardware wholesalers and importers.
Customers can request quotations according to order quantity, destination country and preferred shipping terms.
FOB, CIF and other applicable Incoterms may be discussed subject to commercial confirmation.
Information Required for an Accurate Wholesale Quotation
Product Model: ES3001.
Product Type: Oval Euro Profile Keyhole Escutcheon Plate.
Material: Stainless Steel.
Required Material Grade: Customer Specification.
Surface Finish: Satin Brushed Stainless Steel or Requested Finish.
Plate Dimensions: 64 × 32 × 8 mm.
Keyhole Type: Euro Profile.
Lock Compatibility: Customer-Specified Euro Mortise Lock and Cylinder.
Order Quantity: Required Number of Pieces or Pairs.
Mounting Requirements: Customer Specifications.
Customization: OEM/ODM Requirements.
Packaging: Standard or Private-Label.
Destination: Country and Port.
Shipping Terms: Preferred Incoterms.
Final pricing, MOQ, packaging, payment terms, production lead times and shipping arrangements are subject to official quotation confirmation.
FAQ
Q1: What material is the DEGOL ES3001 Euro profile escutcheon made from?
The DEGOL ES3001 is manufactured from stainless steel. Its reference surface is satin brushed stainless steel. The exact stainless steel grade should be confirmed before ordering.
Q2: What are the dimensions of the ES3001 escutcheon plate?
The ES3001 measures 64 mm in length, 32 mm in width and 8 mm in thickness. The rounded ends feature an R16 radius.
Q3: What type of keyhole does the ES3001 feature?
The ES3001 features a Euro profile keyhole opening intended for compatible Euro profile cylinder arrangements.
Q4: What are the keyhole dimensions of the ES3001?
The engineering drawing specifies an Ø16 mm upper keyhole section, Ø14 mm lower section, 12 mm neck width and 31 mm labeled keyhole center distance. These measurements should be verified against the selected cylinder.
Q5: Is the ES3001 compatible with Euro mortise locks?
The engineering drawing identifies Euro mortise locks as the applicable lock category. Compatibility with a specific lock and cylinder model should be confirmed before ordering.
Q6: What surface finishes are available for the ES3001?
The reference product features satin brushed stainless steel. Polished stainless steel, matte black and satin gold are also illustrated as finish options. Actual availability should be confirmed with DEGOL.
Q7: Is the ES3001 a complete door lock or just a decorative escutcheon?
The ES3001 is a decorative keyhole escutcheon plate. It is not a complete mortise lock, cylinder or door handle set.
Q8: Does the ES3001 include mounting screws or other installation accessories?
The supplied engineering drawing does not specify mounting screws or fixing hardware. Actual package contents and fastening arrangements should be confirmed in the final quotation.
Q9: Can DEGOL provide OEM/ODM customization and wholesale pricing for ES3001?
DEGOL welcomes OEM/ODM and wholesale inquiries. Buyers can discuss custom finishes, material grades, dimensions, packaging, branding, sample availability, MOQ and pricing, subject to technical and commercial confirmation.
Q10: Can DEGOL supply ES3001 stainless steel escutcheons to South American hardware wholesalers?
DEGOL welcomes inquiries from architectural hardware importers, distributors and construction procurement companies serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets. Buyers can provide their required quantities, finish specifications, lock compatibility requirements and destination country to request a wholesale quotation.
CONTACT DEGOL – REQUEST A WHOLESALE QUOTE
Looking for an oval stainless steel Euro profile keyhole escutcheon plate with a satin brushed finish for your architectural hardware collection, wholesale distribution business or construction project?
Contact DEGOL Hardware for technical specifications, engineering drawings, available finishes, sample information, OEM/ODM customization inquiries and wholesale pricing.
Product Model: ES3001
Product Name: Oval Stainless Steel Euro Profile Keyhole Escutcheon Plate with Satin Brushed Finish for Wooden and Commercial Interior Doors
Material: Stainless Steel
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
WhatsApp Link: https://wa.me/8613725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Whether you are a door hardware wholesaler, architectural hardware importer, lock accessory distributor, building material supplier or construction project buyer, DEGOL welcomes your sourcing inquiries.
For faster quotation processing, please provide your required quantity, stainless steel grade, preferred surface finish, Euro profile cylinder specifications, mounting requirements, packaging details and destination country.
Request Your ES3001 Oval Stainless Steel Euro Profile Keyhole Escutcheon Wholesale Quote Today.