 |
LH1115
Degol
| Quantity: | |
|---|---|
The DEGOL LH1115 Modern Sculpted Twisted Wave Door Lever Handle Set is a contemporary architectural door hardware design featuring an elegant flowing lever profile, a subtle twisted surface, and a coordinated round mounting rose.
Unlike conventional straight tubular handles or flat rectangular levers, the LH1115 features a sculptural wave-shaped grip that combines gentle curves, smooth transitions, and a flattened oval section.
The illustrated lever begins with a rounded connecting neck near the mounting rose, gradually develops into a flowing wave profile, and tapers toward a refined outer tip. Its surface appears to twist along the length of the handle, creating a distinctive visual effect.
This combination of flowing lines and subtle surface transitions gives the LH1115 a contemporary architectural character.
The supplied preliminary engineering drawing illustrates a lever length of approximately 130 mm, a handle projection of approximately 60 mm, and a maximum grip width of approximately 22 mm.
The reference lever cross-section at the grip is approximately 22 × 10 mm.
The handle is shown on a circular mounting rose measuring approximately 52 mm in diameter and 10 mm in thickness. Matching round Euro-profile-style keyhole escutcheons are also illustrated.
The reference image presents a satin brushed silver metallic appearance, suitable for consideration in contemporary residential, office, hotel, and commercial interior design schemes.
The drawing identifies stainless steel as a typical material category, with SUS304 and SUS201 listed as examples. However, the exact material and material grade of model LH1115 have not been independently confirmed.
The preliminary dimensional information is based on comparable DEGOL model LH1205 and market-common reference data. These measurements should not be treated as approved LH1115 production specifications.
Jiangmen Degol Hardware Co., Ltd. welcomes wholesale and OEM / ODM inquiries from architectural hardware importers, door handle distributors, door manufacturers, construction suppliers, project contractors, and international hardware brands.
Modern sculpted twisted wave lever design
Elegant flowing and gently tapered grip
Flattened oval lever cross-section
Smooth rounded connecting neck
Satin brushed silver reference appearance
Coordinated round mounting rose
Approx. 130 mm reference lever length
Approx. 60 mm reference handle projection
Approx. 22 mm reference maximum grip width
Approx. 22 × 10 mm reference grip section
Approx. Ø52 mm round mounting rose
Approx. 10 mm reference rose thickness
Matching round Euro-profile-style escutcheons illustrated
Approx. 8 × 8 mm reference square spindle
Suitable for modern architectural hardware collections
Wholesale and OEM / ODM inquiries welcomed
Important Product Notice: The supplied technical drawing is a preliminary reference based on comparable DEGOL LH1205 information. The actual LH1115 dimensions, material, surface finish, mounting arrangement, and component configuration must be confirmed with DEGOL before purchasing, installation, or manufacturing.
The DEGOL LH1115 is a modern lever-on-round-rose door handle design characterized by its sculpted wave-shaped gripping section, subtle twisted surface, flattened oval profile, and circular mounting base.
A lever door handle is a door operating component that rotates a compatible latch or lock mechanism through a spindle connection.
The LH1115 design differs from traditional straight handles through its flowing sculptural geometry.
The lever is not simply a cylindrical bar bent into a curve. Its illustrated gripping surface changes shape along the length, producing a gentle twist and a distinctive wave-like silhouette.
1. Sculpted Wave-Shaped Lever
The LH1115 features a flowing grip with a gentle wave profile.
The curved geometry creates an architectural appearance that differs from straight and sharply angular lever designs.
2. Twisted Surface Design
The illustrated lever has subtle twisting transitions along its length.
These transitions create changing highlights across the metallic surface.
3. Flattened Oval Grip
The reference grip section measures approximately 22 × 10 mm.
This flattened oval profile is an important visual characteristic of the design.
4. Smooth Rounded Neck
The lever connects to the mounting rose through a rounded neck that transitions into the sculpted gripping section.
5. Gently Tapered Outer Tip
The illustrated lever narrows toward its outer end, creating a refined flowing finish.
The actual tip thickness and end radius must be confirmed.
6. Round Mounting Rose
The reference drawing shows a circular mounting rose approximately 52 mm in diameter.
7. Compact Rose Profile
The illustrated rose thickness is approximately 10 mm.
8. Square Spindle Connection
The preliminary assembly shows an approximately 8 × 8 mm square spindle.
The actual spindle dimensions and length must be verified.
9. Matching Keyhole Escutcheons
Two round Euro-profile-style escutcheons are illustrated.
Their exact cutout dimensions and inclusion in the standard commercial package must be confirmed.
10. Opposing Lever Assembly
The drawing illustrates a pair of opposing lever handles designed for installation on opposite sides of a compatible door.
The final handing and reversibility requirements remain subject to confirmation.
The preliminary assembly view includes:
Two sculpted wave-shaped lever handles
Two round decorative mounting roses
Internal mounting plates
One square spindle
Two round keyhole escutcheons
The final commercial packing list must be confirmed. A mortise lock case, lock cylinder, and fixing accessories should not be assumed to be included unless specified.
| Parameter | Specification |
|---|---|
| Brand | DEGOL |
| Model | LH1115 – User-Identified; Specifications TBC |
| Product Name | Modern Sculpted Twisted Wave Door Lever Handle Set |
| Product Category | Architectural Door Hardware |
| Product Type | Lever Handle on Round Rose |
| Lever Style | Sculpted / Twisted / Wave-Shaped |
| Lever Profile | Flowing Curved Grip |
| Grip Cross-Section | Flattened Oval |
| Design Style | Modern / Contemporary / Sculptural |
| Reference Material | Stainless Steel |
| Reference Material Examples | SUS304 / SUS201 |
| Actual Material Grade | Not Verified |
| Reference Finish | Satin / Brushed Silver |
| Other Finish Inquiries | Polished / PVD Black / PVD Gold |
| Lever Length | Approx. 130 mm – Reference |
| Handle Projection | Approx. 60 mm – Reference |
| Maximum Lever Width | Approx. 22 mm – Reference |
| Lever Section at Grip | Approx. 22 × 10 mm – Reference |
| Rose Shape | Round |
| Rose Diameter | Approx. Ø52 mm – Reference |
| Rose Thickness | Approx. 10 mm – Reference |
| Escutcheon Shape | Round |
| Escutcheon Diameter | Approx. Ø52 mm – Reference |
| Escutcheon Thickness | Approx. 10 mm – Reference |
| Escutcheon Keyhole | Euro Profile Style – Exact Compatibility TBC |
| Mounting Plate Diameter | Approx. Ø38 mm – Reference |
| Mounting-Hole Pitch | Approx. 38 mm – Reference; Verify |
| Mounting Holes | 2 × Ø5 mm Through – Reference |
| Square Spindle | Approx. 8 × 8 mm |
| Spindle Length | To Be Confirmed |
| Reference Door Thickness | Approx. 35–55 mm |
| Spring Mechanism | Not Verified |
| Lock Compatibility | Subject to Selected Lock System |
| Escutcheon Inclusion | Illustrated; Standard Supply TBC |
| Applications | Residential / Hotel / Office / Commercial Interior |
| OEM / ODM | Available for Inquiry |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Specification Disclaimer: The dimensions above are based on the supplied preliminary drawing, which references comparable DEGOL LH1205 data. They have not been independently verified for LH1115. Final technical specifications must be confirmed against approved manufacturer drawings or a physical sample.
The supplied LH1115 reference drawing illustrates the lever handle set through multiple engineering views.
These include:
Assembled perspective view
Exploded assembly perspective view
Front elevation
Side view
Top plan view
Round mounting rose detail
Round Euro-profile-style escutcheon detail
Internal mounting plate detail
Lever cross-section
Door installation section
Reference specification table
Together, these views provide a preliminary understanding of the handle's sculpted wave geometry, circular mounting arrangement, spindle connection, and associated keyhole accessories.
The reference drawing indicates a lever length of approximately 130 mm.
This dimension describes the overall lever length according to the reference illustration.
The exact measurement datum and finished production length must be verified.
The reference handle projection is approximately 60 mm.
This dimension is relevant when assessing hand clearance, installed appearance, and potential interference with adjacent door components.
The actual installed projection must be confirmed.
The reference specification indicates a maximum lever width of approximately 22 mm.
This is associated with the broader sculpted gripping area.
The width may vary along the curved profile.
The drawing includes a cross-sectional view of the grip.
The illustrated section is approximately 22 mm wide and 10 mm thick.
Its flattened oval form is one of the distinguishing characteristics of LH1115.
The exact cross-section may vary along the length of the lever because of its sculpted twisted geometry.
The illustrated lever features a flowing wave-shaped surface.
The grip transitions from a rounded connecting neck to a flattened sculpted section and gradually tapers toward the outer end.
The exact curvature, twist angle, surface radii, and manufacturing tolerances are not provided.
The reference mounting rose has a diameter of approximately 52 mm.
The circular rose creates a visual contrast with the flowing lever profile.
The illustrated rose thickness is approximately 10 mm.
The final installed thickness may depend on the decorative cover and mounting arrangement.
The matching round keyhole escutcheon has a reference diameter of approximately 52 mm.
This coordinates with the illustrated lever mounting rose.
The reference escutcheon thickness is approximately 10 mm.
Actual production dimensions must be confirmed.
The drawing illustrates a Euro-profile-style keyhole opening.
The exact opening dimensions, cylinder compatibility, and escutcheon configuration have not been verified.
The internal mounting plate is illustrated with an approximate diameter of 38 mm.
This is a preliminary reference dimension.
The drawing notes state an approximate mounting-hole pitch of 38 mm.
Because the same drawing also indicates an approximately 38 mm mounting-plate diameter, the fixing geometry should be carefully verified.
These dimensions must not be used directly to prepare drilling or manufacturing instructions.
The reference mounting-plate illustration shows two through-holes with an approximate diameter of 5 mm.
The actual hole spacing, screw size, and mounting method must be confirmed.
The exploded assembly illustrates an approximately 8 × 8 mm square spindle.
The final spindle length and compatibility with the selected latch or lock mechanism must be verified.
The reference installation drawing indicates an approximate door thickness range of 35–55 mm.
Actual compatibility depends on the confirmed spindle, mounting hardware, door construction, and locking system.
| Component | Reference Dimension |
|---|---|
| Lever Length | Approx. 130 mm |
| Handle Projection | Approx. 60 mm |
| Maximum Lever Width | Approx. 22 mm |
| Lever Section at Grip | Approx. 22 × 10 mm |
| Rose Diameter | Approx. Ø52 mm |
| Rose Thickness | Approx. 10 mm |
| Escutcheon Diameter | Approx. Ø52 mm |
| Escutcheon Thickness | Approx. 10 mm |
| Mounting Plate Diameter | Approx. Ø38 mm |
| Mounting-Hole Pitch | Approx. 38 mm – Verify |
| Mounting Holes | 2 × Ø5 mm Through |
| Square Spindle | Approx. 8 × 8 mm |
| Door Thickness | Approx. 35–55 mm |
Technical Drawing Notice: The supplied drawing is marked as reference only and not for manufacturing. It is not an approved LH1115 engineering drawing, production specification, or drilling template.
The preliminary reference specification identifies stainless steel as a typical material category.
SUS304 and SUS201 are mentioned as examples in the drawing.
However, the actual LH1115 base material, material grade, and construction method have not been independently confirmed.
Customers requiring a specific material should request written confirmation from DEGOL before placing an order.
The supplied illustration shows a satin brushed silver metallic appearance.
This understated finish emphasizes the flowing curves and changing surfaces of the sculpted wave lever.
The combination of a satin metallic appearance and gently twisted profile can create subtle changes in reflected light across the handle.
The actual surface treatment must be confirmed with the manufacturer.
Customers may inquire about polished metallic finishes for projects requiring a brighter decorative appearance.
Availability depends on the approved base material and production process.
Black PVD is mentioned as a typical finish example in the reference specification.
Customers may request confirmation of availability, coating details, and suitability for the intended installation environment.
It should not be assumed to be a standard LH1115 option without confirmation.
Gold PVD is another finish category referenced in the supplied information.
Customers may inquire about gold-tone surface finishes for hospitality, residential, or decorative interior projects.
The actual color, coating process, and availability must be confirmed.
Depending on production feasibility, customers may request evaluation of:
Satin Silver
Brushed Stainless Steel Appearance
Polished Silver
Satin Nickel Appearance
Matte Black
PVD Black
Brushed Gold
PVD Gold
Champagne Gold
Other Project-Specific Decorative Finishes
These are possible customization inquiries, not confirmed standard LH1115 variants.
Before ordering, buyers should confirm:
Actual base material
Material grade
Solid or hollow construction
Manufacturing process
Surface treatment method
Intended installation environment
Corrosion resistance requirements
Finish durability requirements
Cleaning and maintenance requirements
Applicable project standards
Cleaning procedures should follow the final confirmed material and finish specifications.
For decorative architectural metal hardware, a soft cloth and an appropriate mild cleaning solution are generally preferred.
Avoid abrasive materials and aggressive chemicals that could damage the surface treatment.
The DEGOL LH1115 Twisted Wave Door Lever Handle Set is designed in a contemporary architectural style that can complement a variety of interior environments.
The flowing wave-shaped design can be considered for compatible bedroom doors, living area doors, study doors, and other interior swing doors.
The sculpted lever profile can complement apartment and condominium interiors featuring modern finishes and clean architectural details.
The LH1115 design offers a decorative alternative to conventional straight tubular handles for modern residential projects.
The smooth flowing profile can complement contemporary hospitality interiors.
Actual suitability for hotel guestroom doors depends on the approved lock configuration and applicable security and durability requirements.
The satin silver reference appearance can coordinate with modern office interiors, meeting rooms, and administrative spaces.
The design may be considered for commercial interior doors when the final product meets the required installation, usage, and performance specifications.
The sculpted wave design can be considered where a distinctive contemporary door handle is desired.
The LH1115 provides a recognizable sculptural design category for architectural hardware importers, wholesalers, and distributors.
Door manufacturers may evaluate LH1115 for integration with compatible doors, latches, mortise locks, and fixing systems.
International hardware brands may inquire about the LH1115 design for customized architectural door hardware ranges.
The LH1115 may be considered for compatible hinged doors using an appropriate lever-operated latch or locking mechanism.
| Door Type | Application Consideration |
|---|---|
| Wooden Interior Doors | Subject to mounting and lock compatibility |
| MDF Interior Doors | Subject to door construction and fixing requirements |
| Composite Interior Doors | Subject to approved installation specifications |
| Residential Bedroom Doors | Compatible latch required |
| Apartment Interior Doors | Suitable for evaluation |
| Office Interior Doors | Suitable for evaluation |
| Hotel Guestroom Doors | Security and durability requirements must be verified |
| Commercial Interior Doors | Subject to project specifications |
| Metal Interior Doors | Appropriate mounting preparation required |
| Exterior Entrance Doors | Environmental and material suitability must be confirmed |
| Fire-Rated Doors | Appropriate certification and assembly approval required |
| Frameless Glass Doors | Direct mounting compatibility not established |
| Sliding Doors | Not intended as a conventional sliding-door pull |
Before selecting LH1115, confirm:
Door material and construction
Door thickness
Required latch or mortise lock
Spindle dimensions
Rose mounting arrangement
Fixing-hole locations
Lever handing or reversibility
Handle projection and operating clearance
Keyhole escutcheon dimensions
Cylinder compatibility
Applicable project requirements
The LH1115 should not be represented as approved for fire-rated doors, emergency-exit systems, or certified security assemblies without appropriate supporting documentation.
The following instructions provide a general installation reference for lever-on-round-rose door hardware.
Actual installation must follow the approved LH1115 technical documentation and the selected lock manufacturer's instructions.
Verify the door thickness, door construction, and selected latch or mortise lock.
Confirm that the approved LH1115 mounting system is suitable for the door.
Check the supplied handles, round roses, internal mounting plates, spindle, fixing screws, and accessories against the approved packing list.
If matching escutcheons are required, verify their inclusion.
Review the intended lever orientation on each side of the door.
Check whether the final LH1115 configuration is reversible or requires a specific handing arrangement.
Mark the spindle opening and fixing positions using approved installation instructions.
Do not use the preliminary reference drawing as a drilling template.
Fit the compatible latch or mortise lock according to its manufacturer's instructions.
Confirm that the mechanism operates correctly.
Insert the approved spindle through the lock follower.
Verify the spindle size, length, and engagement requirements.
Place the LH1115 lever assemblies on the appropriate sides of the door.
Check that the sculpted wave profiles are correctly oriented.
Attach the internal mounting components using the approved fixing system.
Fit the decorative rose covers as required.
Avoid overtightening the fixing screws.
If matching Euro-profile-style escutcheons are supplied, install them according to the approved instructions.
Verify compatibility with the selected lock cylinder.
Operate the lever handles repeatedly and check:
Smooth lever rotation
Correct latch retraction
Secure rose mounting
Proper handle alignment
Appropriate hand clearance
No interference with nearby fittings
Correct lever return where specified
Correct locking operation where applicable
Final spindle dimensions, fixing-hole locations, escutcheon dimensions, lock compatibility, door thickness, and installation instructions must be confirmed before fitting the product.
The LH1115 features a flowing wave-shaped lever that creates a recognizable contemporary appearance.
The subtle twisted geometry creates visual movement along the gripping section.
The approximately 22 × 10 mm reference grip section differentiates LH1115 from round tubular and square-bar lever handles.
The illustrated lever connects to the mounting rose through a rounded neck and smooth sculptural transitions.
The outer end narrows gradually, reinforcing the flowing character of the design.
The combination of curves and a circular mounting rose complements contemporary interior styling.
The illustrated metallic appearance coordinates with a wide range of modern door colors and interior finishes.
The approximately Ø52 mm reference mounting rose creates a balanced appearance.
The illustrated round Euro-profile-style escutcheons offer a coordinated design option, subject to confirmed availability and compatibility.
The LH1115 differs visually from straight tubular, square-bar, rectangular blade, and simple curved lever designs.
The handle can be considered for residential, apartment, office, hotel, and compatible commercial interior projects.
The sculpted wave design offers a differentiated product style for international hardware distributors and private-label collections.
Jiangmen Degol Hardware Co., Ltd. welcomes OEM and ODM inquiries for modern architectural door hardware, including sculpted wave-shaped lever handle designs such as LH1115.
International customers can submit drawings, reference samples, material requirements, finish specifications, and packaging instructions for technical evaluation.
Potential private-label requirements include:
Customer brand identification
Customized product model codes
Branded labels
Private-label packaging
Barcode stickers
Printed installation instructions
Export carton markings
Availability depends on the approved product configuration and order requirements.
Customers may request evaluation of specific materials or material grades.
The final selection must be compatible with the sculpted lever geometry and required manufacturing process.
Customers may inquire about satin, polished, black, gold, and other decorative finish options.
Actual availability depends on material compatibility, manufacturing feasibility, and order quantity.
Potential modification requests include:
Lever length
Handle projection
Maximum grip width
Oval section dimensions
Wave curvature
Twist geometry
Tapered tip dimensions
Connecting neck geometry
Rose dimensions
Mounting configuration
Any geometry modification may require revised engineering drawings, tooling, and sample approval.
Customers may discuss decorative rose dimensions, cover profiles, and fixing arrangements.
All modifications must remain compatible with the approved door and lock configuration.
Customers may inquire about matching round keyhole escutcheons and coordinated locking accessories.
Final cutout dimensions and lock compatibility must be confirmed.
Potential packaging requirements include:
Private-label product boxes
Protective internal packaging
Branded labels
Barcode identification
Customized instruction sheets
Export carton markings
Customers may submit architectural drawings, door schedules, material requirements, finish references, and estimated purchasing quantities.
Where available, samples can be requested to verify product appearance, dimensions, surface finish, and installation compatibility before bulk ordering.
OEM / ODM Notice: All customization requests are subject to technical feasibility, tooling requirements, material availability, MOQ, sample approval, and agreed production lead times.
| Item | Information |
|---|---|
| Product Model | LH1115 |
| Brand | DEGOL |
| Product Name | Modern Sculpted Twisted Wave Door Lever Handle Set |
| Main Material | To Be Confirmed |
| Material Grade | Not Verified |
| Reference Finish | Satin / Brushed Silver |
| Lever Handles | Opposing Pair Illustrated; Supply Quantity TBC |
| Round Roses | Illustrated; Final Quantity TBC |
| Internal Mounting Plates | Illustrated; Final Supply TBC |
| Square Spindle | Approx. 8 × 8 mm Reference |
| Spindle Length | To Be Confirmed |
| Fixing Screws | Subject to Confirmed Packing List |
| Keyhole Escutcheons | Pair Illustrated; Inclusion TBC |
| Escutcheon Profile | Euro Profile Style; Compatibility TBC |
| Mortise Lock Case | Not Confirmed as Included |
| Lock Cylinder | Not Confirmed as Included |
| MOQ | Subject to Quotation |
| Sample Availability | On Request |
| OEM Packaging | Subject to Confirmation |
| Production Lead Time | Subject to Order Confirmation |
| Payment Terms | To Be Negotiated |
| Shipping Terms | Subject to Quotation |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Step 1 – Submit Your Inquiry
Provide DEGOL with model LH1115, required quantity, preferred material, finish, and destination country.
Step 2 – Confirm Product Specifications
Verify the lever dimensions, sculpted wave geometry, rose size, spindle, mounting arrangement, and lock compatibility.
Step 3 – Request Samples
Contact DEGOL regarding sample availability, pricing, and shipping arrangements.
Step 4 – Confirm OEM / ODM Requirements
Submit branding artwork, finish references, packaging instructions, or custom drawings where applicable.
Step 5 – Review the Wholesale Quotation
Confirm unit pricing, MOQ, packaging, payment terms, production lead time, and delivery conditions.
Step 6 – Approve the Final Product Configuration
Review the approved technical specifications, physical sample where required, and final packing list.
Step 7 – Arrange Production and Shipment
Production, inspection, packaging, and shipment follow the confirmed purchase order and agreed commercial terms.
Product Model: LH1115
Required Order Quantity
Preferred Material Grade
Required Surface Finish
Door Thickness
Lock and Spindle Requirements
Escutcheon Requirements
OEM / ODM Requirements
Packaging Preferences
Destination Country
Expected Delivery Schedule
Jiangmen Degol Hardware Co., Ltd. is a China-based architectural hardware company serving international customers with door hardware and related architectural fittings.
DEGOL welcomes wholesale, OEM, and ODM inquiries from international buyers seeking contemporary door handle designs and coordinated architectural hardware products.
Customers may inquire about DEGOL product categories such as:
Modern door lever handles
Sculpted wave-shaped door handles
Curved lever handle designs
Round rose door handles
Square rose door handles
Decorative door handle sets
Door escutcheons
Door locks and mortise lock bodies
Door hinges
Architectural door accessories
Specific model availability must be confirmed with DEGOL.
DEGOL welcomes inquiries involving customer drawings, reference samples, dimensional requirements, and project specifications.
Custom product development requests are subject to technical evaluation.
The manufacturing process for architectural door hardware depends on the approved material, lever geometry, component construction, and performance requirements.
The actual LH1115 production method has not been verified.
Customers should request confirmation before making claims about solid construction, casting, forging, machining, or other manufacturing processes.
Customers may inquire about decorative surface treatment options and project-specific finish requirements.
Actual availability depends on the approved material and manufacturing process.
The preliminary LH1115 drawing illustrates opposing lever assemblies, round roses, internal mounting plates, a square spindle, and matching keyhole escutcheons.
The final product structure and packing configuration must be confirmed.
Buyers may request information about inspection procedures covering:
Dimensional consistency
Surface appearance
Assembly fit
Lever operation
Mounting compatibility
Finish requirements
Packaging inspection
Specific LH1115 certifications, test results, and quality standards must be verified separately.
DEGOL welcomes international sourcing inquiries involving standard product packaging, private-label packaging, and export arrangements.
Final packaging specifications depend on the confirmed product configuration and purchase order.
International customers may submit requirements for:
Custom lever designs
Material specifications
Surface finish options
Dimensional modifications
Private-label branding
Customized packaging
Project-specific hardware configurations
DEGOL welcomes inquiries from:
Architectural hardware importers
Door handle wholesalers
Regional hardware distributors
Door manufacturers
Building material suppliers
Construction contractors
Hotel project purchasing teams
International hardware brands
OEM / ODM customers
For LH1115, customers may request:
Verified product technical drawings
Material specifications
Available finishes
Lever dimensions
Grip section details
Rose and mounting plate dimensions
Spindle specifications
Lock compatibility
Matching escutcheon options
Sample information
Packaging details
Wholesale quotations
Factory Capability Notice: General company information should not be interpreted as confirmation of LH1115-specific production availability, manufacturing capacity, material certifications, performance testing, or approved dimensions. These details require confirmation from DEGOL.
The DEGOL LH1115 is a modern sculpted twisted wave door lever handle design featuring a flowing curved grip and circular mounting rose.
Its defining feature is a sculpted wave-shaped gripping section with subtle twisting transitions and a flattened oval profile.
Yes. The supplied reference drawing illustrates a curved, flowing lever profile.
The illustrated lever features a sculpted surface that appears to twist along its length.
The exact geometry must be confirmed using approved technical drawings or a physical sample.
The illustrated design has a modern, contemporary, and sculptural architectural style.
Yes. The supplied drawing shows a circular mounting rose.
The reference specification identifies stainless steel as a typical material category.
The actual LH1115 material has not been independently verified.
SUS304 is mentioned as an example in the reference specification, but it has not been confirmed for LH1115.
Customers requiring SUS304 should request written confirmation.
SUS201 is also mentioned as a material example in the supplied reference drawing.
Actual availability must be confirmed with DEGOL.
The supplied illustration shows a satin brushed silver metallic appearance.
The final production finish must be confirmed.
Customers may inquire about black and gold decorative finishes, including PVD options.
Availability must be confirmed before ordering.
The reference lever length is approximately 130 mm.
This is not a verified LH1115 production dimension.
The reference handle projection is approximately 60 mm.
The reference specification indicates a maximum lever width of approximately 22 mm.
The reference drawing illustrates an approximately 22 × 10 mm flattened oval grip section.
The illustrated grip has a sculpted, flattened oval profile rather than a simple cylindrical shape.
The preliminary drawing does not establish whether the lever is solid or hollow.
The actual construction must be confirmed.
The reference rose diameter is approximately 52 mm.
The reference rose thickness is approximately 10 mm.
The preliminary drawing illustrates two matching round Euro-profile-style keyhole escutcheons.
Their inclusion in the standard commercial package has not been confirmed.
The reference escutcheon diameter is approximately 52 mm.
The reference escutcheon thickness is approximately 10 mm.
No. The exact cutout dimensions and cylinder compatibility must be verified.
The reference drawing illustrates an approximately 8 × 8 mm square spindle.
The actual spindle size and length must be confirmed.
The reference specification indicates approximately 35–55 mm.
Actual compatibility depends on the final fixing system, spindle, lock mechanism, and door construction.
The reference mounting-plate diameter is approximately 38 mm.
The reference notes indicate an approximate mounting-hole pitch of 38 mm.
Because the mounting-plate diameter is also listed as approximately 38 mm, the fixing geometry requires verification before drilling.
The reference mounting-plate illustration shows two approximately 5 mm through-holes.
LH1115 may be considered for compatible wooden interior doors when the mounting system and selected lock mechanism are suitable.
The design can be considered for hotel, office, and commercial interior projects.
Actual suitability depends on security, durability, locking, and installation requirements.
Exterior suitability has not been confirmed.
Customers should verify material grade, corrosion resistance, finish durability, and environmental exposure requirements.
No LH1115 fire-rating documentation has been provided.
Use in a fire-rated door assembly requires appropriate certification and approval.
The reference drawing does not verify an internal return spring.
Customers should request confirmation of the actual mechanism.
The drawing illustrates opposing lever assemblies, but universal reversibility has not been confirmed.
Handing requirements should be checked before ordering.
The drawing does not establish that a mortise lock case or lock cylinder is included.
The final packing list should identify all supplied components.
Customers may inquire about alternative decorative finishes.
Availability depends on material compatibility, manufacturing feasibility, and order requirements.
DEGOL welcomes OEM inquiries involving private-label branding, product identification, labels, and customized packaging.
Customers may submit modification requests for technical evaluation.
Potential changes include lever length, grip width, curvature, twist geometry, tip dimensions, projection, and rose size.
Customers can contact DEGOL to inquire about sample availability, pricing, and shipping arrangements.
The confirmed LH1115 minimum order quantity has not been provided.
MOQ should be requested according to the required material, finish, configuration, and packaging.
Buyers may request verified dimensional specifications and approved drawings from DEGOL.
The preliminary reference image should not be used for manufacturing or drilling.
The illustrated LH1115 features a flowing sculpted wave grip with a flattened oval section.
LH1114 features a straight square-bar lever with a right-angle return end.
LH1115 has a more organic sculptural appearance, while LH1114 emphasizes straight geometric lines.
Both designs have sculptural characteristics.
The earlier LH1113 reference features a fuller twisted leaf-shaped grip, while LH1115 features a slimmer flowing wave profile with an approximately 22 × 10 mm reference grip section.
The exact differences should be confirmed using approved product samples or drawings.
The supplied LH1115 reference drawing identifies DEGOL LH1205 as a comparable model used for dimensional reference.
This does not establish that LH1115 and LH1205 are identical products or share verified production specifications.
DEGOL welcomes wholesale inquiries from architectural hardware importers, distributors, door manufacturers, contractors, and professional purchasing teams.
Contact DEGOL Hardware via WhatsApp at +86 13725946499 or email info@degolhardware.com.
Provide model LH1115, order quantity, preferred material, finish, door thickness, lock requirements, escutcheon requirements, packaging preferences, and destination country.
Looking for a modern sculpted twisted wave door lever handle with round rose and matching Euro-profile-style escutcheon options for your architectural door hardware collection?
Contact DEGOL Hardware for confirmed product specifications, approved technical drawings, material options, decorative finishes, sample information, packaging details, and wholesale pricing.
Product Model: LH1115
Product Name: LH1115 Modern Sculpted Twisted Wave Door Lever Handle Set on Round Rose with Euro Profile Escutcheons
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your LH1115 Sculpted Twisted Wave Door Lever Handle Set Wholesale Quote Today
