ML1054 Single Cylinder Mortise Deadbolt Lock for Entry Doors

Product Introduction

The DEGOL ML1054 Single Cylinder Mortise Deadbolt Lock is an architectural door locking solution designed for buyers seeking a practical key-operated security mechanism for residential entry doors and suitable commercial door projects.

Featuring a single-cylinder mortise deadbolt configuration, the ML1054 is intended to provide a dedicated door-locking function within a mortise-installed assembly. Its product category makes it suitable for consideration in new door hardware installations, replacement projects and coordinated architectural hardware collections.

As an architectural door hardware supplier, DEGOL supports international distributors, building hardware wholesalers, importers and project procurement teams seeking mortise lock products, product documentation and wholesale sourcing solutions.

For projects requiring specific door preparation dimensions, surface finishes or customized packaging, buyers can contact DEGOL Hardware to confirm ML1054 configuration options before ordering.

Product Definition

What Is a Single Cylinder Mortise Deadbolt Lock?

A single cylinder mortise deadbolt lock is a mechanical door locking device that uses a keyed cylinder on one side of the door and typically a thumb-turn mechanism on the opposite side.

Unlike a surface-mounted or standard bored cylindrical deadbolt, a mortise deadbolt configuration is designed for installation into a prepared pocket within the door edge.

The DEGOL ML1054 belongs to this category of architectural door security hardware.

A mortise deadbolt lock generally incorporates a deadbolt mechanism designed to extend into a compatible strike plate or receiving opening in the door frame, helping secure the door when locked.

Single-cylinder mortise deadbolts are commonly selected for:

• Residential entry door installations

• Apartment and property renovation projects

• Door hardware replacement applications

• Architectural hardware supply programs

• Selected commercial door projects

The exact locking operation, handing requirements and installation compatibility should be verified against the ML1054 technical drawing and supplied hardware configuration.

Product Specification

Technical Drawing & Dimensions

The ML1054 Single Cylinder Mortise Deadbolt Lock requires accurate door preparation and component alignment for proper installation.

Buyers should confirm the official technical drawing before selecting the product for a door manufacturing or renovation project.

Key dimensions to verify:

Technical Drawing Availability

DEGOL Hardware can be contacted to request the ML1054 dimensional drawing, door preparation guidance and product configuration details.

Recommended technical documentation includes front view, side view, lock body dimensions, deadbolt position and installation hole locations.

Important: All installation measurements should be confirmed with the manufacturer's current technical drawing. Do not use generic mortise lock dimensions as a direct drilling or machining template for ML1054.

Material & Surface Finish

Material selection and surface finishing play an important role in the functionality, appearance and long-term maintenance of architectural door hardware.

The DEGOL ML1054 can be evaluated for projects with different material and finish requirements. The exact manufacturing material and available finish combinations should be confirmed before the final order.

Buyers may request information about stainless steel appearance options, polished finishes, plated finishes or other project-specific finish requirements where supported by the factory.

Finish availability should be checked against the final ML1054 product specification rather than assumed from other DEGOL lock models.

Applications

The ML1054 Single Cylinder Mortise Deadbolt Lock is intended for architectural door hardware applications requiring a mechanical mortise locking arrangement.

Typical application scenarios include:

• Residential Entry Doors: For suitable main entrance door assemblies that require a key-operated locking solution.

• Apartment Renovation Projects: For upgrading compatible mechanical door locking hardware during property maintenance.

• Commercial Property Projects: For suitable office or business premises where the lock configuration meets project requirements.

• Architectural Door Hardware Supply: For manufacturers, distributors and wholesalers assembling complete door hardware product ranges.

• Replacement Lock Projects: For compatible doors with existing mortise preparation, subject to dimensional verification.

• Real Estate Development: For project procurement involving coordinated door locks, handles, hinges and other architectural hardware.

Final suitability depends on the door material, dimensions, opening direction, installation conditions and applicable building requirements.

Suitable Door Types

The ML1054 mortise deadbolt lock may be considered for the following door categories, provided that the door structure and preparation dimensions are compatible.

Note: Confirm compatibility with the door manufacturer and applicable building regulations before installation, particularly for fire-rated doors, escape routes and access-controlled entrances.

Installation Guide

The following instructions provide a general overview of mortise deadbolt installation. Always use the official ML1054 installation instructions and dimension drawings for actual door preparation.

1. Confirm Door Compatibility — Check door thickness, material, handing and required mortise dimensions before starting installation.

2. Mark the Lock Position — Identify the correct installation height, faceplate position and cylinder centerline using the approved technical drawing.

3. Prepare the Mortise Pocket — Create the required cavity in the door edge using suitable woodworking or metalworking equipment.

4. Fit the Lock Body — Insert the mortise deadbolt body into the prepared door cavity and confirm correct alignment.

5. Install Cylinder and Interior Hardware — Fit the key cylinder and the specified interior operating mechanism according to the supplied configuration.

6. Install the Strike Plate — Position and secure the compatible strike plate or receiving component on the door frame.

7. Test Lock Operation — Check key operation, deadbolt movement, alignment and locking performance with the door open before testing it closed.

8. Complete Final Inspection — Confirm smooth locking and unlocking, correct fastener installation and appropriate door clearance.

For commercial, fire-rated or regulated building applications, installation should be performed by qualified personnel in accordance with applicable regulations.

Product Advantages

1. Dedicated Mechanical Locking Function

The mortise deadbolt configuration provides a dedicated mechanical locking mechanism for compatible door assemblies.

2. Single Cylinder Operation

The single-cylinder design supports a keyed exterior locking arrangement with an interior operating mechanism subject to the selected configuration.

3. Mortise-Based Installation

The lock body is designed for integration into a properly prepared door-edge mortise, supporting a coordinated architectural hardware appearance.

4. Architectural Hardware Integration

The ML1054 can be considered alongside compatible door handles, cylinders and other building hardware products.

5. Residential and Project Supply Potential

The product category is relevant to distributors and project buyers sourcing locks for residential and suitable commercial door applications.

6. Wholesale Procurement Support

DEGOL provides an established door hardware product range and a direct contact channel for buyers seeking specifications, samples and wholesale quotations.

7. OEM / ODM Inquiry Options

Buyers can discuss project-specific branding, packaging or configuration requirements, subject to technical feasibility and production confirmation.

OEM / ODM Service

DEGOL Hardware supports OEM and ODM discussions for architectural door hardware supply projects.

For the ML1054 Single Cylinder Mortise Deadbolt Lock, customization requirements can be reviewed according to product design, order volume and manufacturing feasibility.

Buyers should provide their target market, required product specifications, estimated order quantity and customization requirements when requesting an OEM or ODM quotation.

Packaging & Order Information

DEGOL provides direct inquiry support for distributors, building hardware importers and international wholesale buyers.

For an accurate quotation, please provide the required order quantity, destination country, finish requirements, expected delivery date and any technical documentation needed.

Factory Capability

Jiangmen Degol Hardware Co., Ltd. – Architectural Door Hardware Supplier in China

DEGOL Hardware is a China-based supplier of architectural and building hardware products, with a product portfolio covering door locks, mortise lock bodies, door handles, door hinges, cylinders and other door accessories.

According to the DEGOL website, the company has operated since 2012 and lists a headquarters area of approximately 800 m² and a 50,000 m² workplace.

DEGOL offers a broad selection of hardware categories relevant to wholesale buyers, including door hardware, furniture hardware, glass door fittings and related building accessories.

International Wholesale Inquiries

The company's product portfolio supports inquiries from hardware distributors, importers, building material suppliers and procurement teams looking for multiple architectural hardware categories.

Product Selection & Technical Coordination

Buyers can contact DEGOL for available models, product specifications, manufacturing options and related door hardware products.

OEM & Project Supply

Customized requirements, private labeling and project-specific product inquiries can be reviewed according to product capabilities and confirmed order specifications.

For buyers developing a complete architectural door hardware range, DEGOL offers a centralized contact point for discussing locks, handles and associated accessories.

FAQ – ML1054 Single Cylinder Mortise Deadbolt Lock

Q1: What is the DEGOL ML1054 Single Cylinder Mortise Deadbolt Lock?

The ML1054 is a single-cylinder mortise deadbolt lock model offered under the DEGOL architectural door hardware product range. It is intended for compatible door installations requiring a mechanical deadbolt locking arrangement.

Q2: What is the difference between a single cylinder and a double cylinder deadbolt?

A single-cylinder deadbolt typically uses a key on the exterior side and a thumb turn on the interior side. A double-cylinder deadbolt generally uses a key-operated cylinder on both sides. Exact operation depends on the product configuration.

Q3: Is the ML1054 suitable for wooden doors?

It may be suitable for wooden doors with the required structural thickness and mortise preparation. Buyers should confirm the door thickness and official installation dimensions before ordering.

Q4: Can the ML1054 be installed on metal doors?

Metal door installation may be possible when the door is designed to accommodate the mortise lock body and associated hardware. Compatibility must be verified against the door manufacturer's preparation requirements.

Q5: What are the backset and lock body dimensions of ML1054?

The exact backset and lock body dimensions require confirmation from the official ML1054 technical specification or drawing. Contact DEGOL for current dimensional information.

Q6: What finishes are available for the ML1054 mortise deadbolt lock?

Available finishes depend on the specific product configuration and current production options. Please contact DEGOL for confirmed finishes and matching architectural hardware options.

Q7: Is the ML1054 suitable for commercial door installations?

It may be considered for suitable commercial applications, subject to the door type, usage requirements, applicable building codes and verified product specifications.

Q8: Can I order ML1054 mortise deadbolt locks in bulk?

Yes, wholesale buyers can contact DEGOL to discuss bulk supply requirements, order quantity, product configuration and quotation details. MOQ and delivery arrangements require confirmation.

Q9: Does DEGOL provide OEM or private label service?

DEGOL accepts customization inquiries. Buyers can discuss OEM branding, packaging and product requirements with the sales team, subject to technical and commercial approval.

Q10: Can I request a sample before placing a wholesale order?

You can contact DEGOL to request sample information. Sample availability, cost and shipping arrangements should be confirmed with the sales team.

Q11: Does the ML1054 include keys, a strike plate and installation screws?

The supplied accessory package should be verified against the official ML1054 kit configuration before purchase.

Q12: How do I request a wholesale quotation for the ML1054?

Contact DEGOL Hardware through WhatsApp, email or the official website. Include the product model ML1054, required quantity, destination market and any special finish or customization requirements.

Contact DEGOL – Request a Wholesale Quote