 |
SP1011
Degol
| Quantity: | |
|---|---|
SP1011 – Stainless Steel D-Shaped Door Pull Handle on 300mm Rectangular Backplate with 45mm Round Cutout
PRODUCT SPECIFICATIONS
The DEGOL SP1011 features a stainless steel D-shaped tubular pull handle mounted on a rectangular backplate with a 45 mm circular top opening and six fixing holes. Its straightforward design is suitable for compatible residential, hospitality and commercial door installations.
| Product Attribute | Specification |
|---|---|
| Model Number | SP1011 |
| Product Type | Pull Handle Plate Set |
| Backplate Dimensions | 300 × 100 × 10 mm |
| Handle Diameter | Ø19 mm |
| Handle Projection | 62 mm |
| Top Hole Diameter | Ø45 mm |
| Fixing Holes | 6 Holes, Ø6.5 mm |
| Suitable Door Thickness | 35–55 mm |
Note: Dimensions are based on the supplied SP1011 engineering drawing. The intended function of the Ø45 mm opening, final material grade, finish and included accessories should be confirmed before ordering.
PRODUCT INTRODUCTION
The DEGOL SP1011 Stainless Steel D-Shaped Door Pull Handle on Rectangular Backplate combines a practical tubular pull handle with a clean, elongated mounting plate, creating a contemporary architectural hardware option for residential, hospitality and commercial doors.
Featuring a vertically mounted D-shaped tubular pull handle, the SP1011 provides a convenient gripping surface for manually opening and closing compatible doors. Its smooth cylindrical profile and rounded handle ends complement modern architectural interiors.
The product features a 300 × 100 mm rectangular backplate, a Ø19 mm tubular pull handle and a 62 mm handle projection. The backplate incorporates a Ø45 mm circular opening near the top and six fixing holes for the specified mounting arrangement.
The elongated backplate provides a coordinated mounting surface, making the SP1011 suitable for projects requiring a pull handle and plate assembly rather than a conventional lever-operated door handle.
Stainless steel construction provides a practical material option for architectural door hardware applications. Buyers can discuss the required material grade and surface finish according to their project environment and purchasing requirements.
As an architectural hardware manufacturer and export supplier, DEGOL welcomes inquiries from international wholesalers, importers, distributors and construction project buyers seeking stainless steel pull handle solutions for bulk purchasing and OEM/ODM cooperation.
Key Product Features:
Modern D-shaped tubular stainless steel pull handle.
Rectangular 300 × 100 mm backplate design.
Ø19 mm tubular handle with a smooth gripping surface.
62 mm handle projection for convenient manual operation.
Ø45 mm circular opening in the upper section of the plate.
Six Ø6.5 mm fixing holes for the specified mounting arrangement.
Suitable for compatible residential, hotel and commercial doors.
Stainless steel construction with finish options subject to confirmation.
OEM/ODM customization and wholesale purchasing inquiries welcomed.
APPLICATIONS
The SP1011 Stainless Steel Pull Handle Plate Set can be considered for architectural door hardware applications requiring a manually operated pull handle, rectangular mounting plate and compatible fixing arrangement.
Residential Buildings and Apartments
Suitable for selected residential entrance doors, apartment access doors and interior doors where a pull handle configuration is appropriate.
Hotels and Hospitality Projects
A practical design option for hotel entrances, service-area doors and hospitality interior installations requiring coordinated stainless steel pull hardware.
Office Buildings and Commercial Interiors
The simple tubular design complements office entrance doors, administrative areas and commercial interior environments where a fixed pull handle is specified.
Residential Construction and Renovation Projects
Suitable for consideration in housing developments and renovation projects requiring a consistent pull handle design across multiple compatible door installations.
Wholesale and Hardware Distribution
A relevant product for architectural hardware importers, door hardware wholesalers, building material distributors and professional hardware retailers seeking stainless steel pull handle plate assemblies.
The SP1011 is particularly relevant to international wholesale and construction sourcing inquiries from South American markets, including Brazil, Chile, Peru, Colombia and Argentina.
For fire-rated, security-rated, high-traffic or exposed exterior applications, buyers should confirm the required performance specifications and applicable project standards before selecting the product.
SUITABLE DOOR TYPES
The DEGOL SP1011 D-Shaped Tubular Pull Handle can be considered for the following door types, subject to door construction, fixing requirements and the intended function of the circular plate opening.
Wooden Doors
Suitable for compatible wooden door installations where the mounting surface provides sufficient support for the specified fixing system.
Solid Timber Doors
Applicable to solid timber doors where door thickness, fixing positions and mounting requirements meet the product specifications.
Metal Doors
Can be considered for metal door installations with appropriate mounting preparation, reinforcement where necessary and suitable fixing hardware.
Apartment Entrance Doors
A pull handle option for compatible residential apartment entrance installations requiring a rectangular backplate design.
Hotel and Hospitality Doors
Suitable for selected hospitality door applications where the pull handle configuration and mounting arrangement meet project requirements.
Office and Commercial Doors
Applicable to compatible office entrance doors, administrative doors and commercial interior doors requiring fixed pull hardware.
Door Compatibility Note:
The SP1011 engineering drawing specifies a reference door thickness range of 35–55 mm.
Before bulk ordering, buyers should confirm the door thickness, fixing hole positions, mounting screw specifications and compatibility of the Ø45 mm circular opening with any associated hardware.
The SP1011 is a pull handle assembly rather than a spring-operated lever handle. Any latch, lock or access-control mechanism must be selected and verified separately.
For South American construction projects, compatibility with locally specified door hardware and applicable installation requirements should be checked before ordering.
TECHNICAL DRAWINGS & LOCK COMPATIBILITY
The DEGOL SP1011 Pull Handle Plate Set features a rectangular stainless steel backplate with a vertically mounted tubular pull handle, a circular upper opening and six fixing holes.
Key Engineering Dimensions
Backplate Height: 300 mm.
Backplate Width: 100 mm.
Backplate Thickness: 10 mm.
Handle Diameter: Ø19 mm.
Handle Projection: 62 mm.
Top Circular Opening: Ø45 mm.
Fixing Hole Diameter: Ø6.5 mm.
Number of Fixing Holes: 6.
Suitable Door Thickness: 35–55 mm.
Rectangular Backplate Design
The SP1011 features a 300 × 100 mm rectangular backplate with rounded corners and six fixing holes positioned along the two sides of the plate.
The plate provides a mounting surface for the tubular pull handle and includes a circular opening near the upper section.
The engineering drawing specifies a plate thickness of 10 mm and a fixing hole diameter of Ø6.5 mm.
Buyers should verify the fixing hole centre positions and door preparation requirements against the approved technical drawing before installation.
45mm Circular Top Opening
The SP1011 includes a Ø45 mm circular opening near the top of the backplate.
This opening is a distinctive feature of the product design. Its intended hardware application should be confirmed before selecting any associated locking, access-control or door accessory components.
The Ø45 mm measurement should not be interpreted as universal compatibility with a specific lock cylinder or hardware standard.
Lock and Hardware Compatibility
Unlike a conventional lever handle, the SP1011 is designed primarily as a fixed pull handle assembly.
It does not operate a latch through a lever spindle.
Where a locking system is required, buyers should select a compatible lock or access-control arrangement separately and verify the installation positions, required clearances and function of the circular plate opening.
Fixing Requirements
The engineering drawing specifies:
Fixing Hole Diameter: Ø6.5 mm.
Fixing Screws: M5 or ST5.5, subject to mounting configuration.
Number of Screws: 6 pieces, as illustrated.
Reference Door Thickness: 35–55 mm.
The required screw length and fixing method depend on the door material, thickness and approved installation arrangement.
Surface Finish Options
The supplied engineering reference illustrates the following stainless steel finishes:
SSS: Satin Stainless Steel – Brushed Silver.
PSS: Polished Stainless Steel – Mirror Silver.
PVD-GD: PVD Gold.
PVD-BK: PVD Black.
Available finishes for SP1011 should be confirmed with DEGOL before placing an order.
Material Selection
The reference drawing includes a comparison of stainless steel grades 304 and 201.
Stainless Steel 304: Generally offers better corrosion resistance and is often preferred where greater environmental resistance is required.
Stainless Steel 201: Can provide a cost-effective option for suitable indoor applications.
Buyers should confirm the available material grade, required environmental resistance and relevant product documentation before ordering.
Technical Note:
All dimensions are based on the supplied SP1011 engineering drawing. Final production specifications, mounting positions, tolerances and included accessories should be confirmed against approved product documentation.
INSTALLATION GUIDE
The SP1011 Stainless Steel D-Shaped Pull Handle Plate Set is intended for installation on compatible doors using an appropriate mounting arrangement.
The following steps provide general installation guidance.
Step 1: Check Door Compatibility
Confirm that the door thickness is within the reference 35–55 mm range and that the door material can support the specified pull handle fixing arrangement.
Step 2: Confirm Hardware Requirements
Check the required mounting positions and determine whether the Ø45 mm circular opening must align with any additional door hardware.
Confirm the selected fixing method before preparing the door.
Step 3: Mark the Fixing Positions
Position the rectangular backplate against the door and mark the six fixing locations according to the approved installation drawing.
Check the alignment and ensure that sufficient clearance is available for the pull handle.
Step 4: Prepare the Door
Prepare the fixing holes using the appropriate tools and procedures for the selected door material.
If the circular opening is required for additional hardware, prepare the corresponding door opening according to the approved specifications.
Step 5: Position the Pull Handle Plate
Place the SP1011 backplate against the prepared door surface, aligning the fixing holes and any required circular opening.
Ensure that the plate sits correctly against the door.
Step 6: Secure the Assembly
Fasten the pull handle plate using the approved fixing system.
The reference drawing specifies six fixing positions and identifies M5 or ST5.5 screw options.
Select the appropriate screw type and length according to the door construction and mounting requirements.
Step 7: Check Installation
Confirm that the backplate is securely mounted and that the tubular pull handle remains stable during normal manual operation.
Check any associated door hardware for proper clearance and function.
Installation Note:
Installation methods may vary depending on door material, fixing configuration and associated locking hardware.
The exact package contents and fixing components should be confirmed before ordering.
Professional installation is recommended for commercial and construction project applications.
FACTORY CAPABILITY
DEGOL Hardware – Professional Architectural Door Hardware Manufacturer
Jiangmen Degol Hardware Co., Ltd. is a China-based hardware manufacturer and export supplier providing architectural hardware solutions for international importers, wholesalers, distributors and construction project buyers.
DEGOL supplies door hardware, glass hardware, furniture hardware, window hardware and related products for residential and commercial applications.
Manufacturing and Product Supply
DEGOL's manufacturing and supply operations cover product development, production, assembly, quality control, packaging and export coordination.
The company supports wholesale hardware sourcing and project-based purchasing requirements for international customers.
OEM & ODM Customization
DEGOL welcomes OEM and ODM inquiries from architectural hardware wholesalers, distributors and private-label customers.
Depending on product specifications and manufacturing feasibility, customization inquiries may include:
Custom logos and private-label branding.
Alternative stainless steel surface finishes.
Product dimension and configuration adjustments.
Customized packaging and carton labeling.
Product development based on customer drawings or samples.
All customization requirements are subject to technical review and commercial confirmation.
Quality Control
DEGOL incorporates quality control into its manufacturing and supply processes, with attention to material requirements, dimensional consistency, product appearance, assembly and packaging.
Customers may request available technical specifications, material information and relevant quality documentation before confirming wholesale orders.
International Wholesale Supply
DEGOL welcomes long-term cooperation with architectural hardware importers, building material wholesalers, distributors and construction contractors.
The company supports international B2B sourcing inquiries, including customers supplying stainless steel door hardware to South American residential, hospitality and commercial construction markets.
PACKAGING & EXPORT INFORMATION
DEGOL provides wholesale purchasing and export support for international customers interested in the SP1011 stainless steel pull handle plate set.
Product Packaging
Packaging arrangements can be discussed according to the selected product configuration, order quantity and customer requirements.
Available packaging inquiries may include:
Protective individual product packaging.
Retail boxes and master cartons.
Custom logo and private-label packaging.
Product labels and carton markings.
Export carton and palletizing requirements.
Wholesale Orders
Customers can contact DEGOL to confirm the applicable minimum order quantity, sample availability, wholesale pricing and estimated production lead time.
Export and Shipping
DEGOL welcomes international shipment inquiries and can discuss export arrangements according to the destination country, order quantity and shipping requirements.
Customers may request quotations based on applicable trading terms, including FOB or CIF, subject to commercial confirmation.
Information Required for an Accurate Quotation:
Product Model: SP1011.
Required Order Quantity: Specify the requested quantity.
Material Requirements: Confirm the required stainless steel grade.
Preferred Surface Finish: SSS, PSS, PVD Gold, PVD Black or other requested finish.
Product Configuration: Confirm the required mounting arrangement and accessories.
Packaging Requirements: Standard or private-label packaging.
Destination: Country and port.
Preferred Shipping Terms: FOB, CIF or other agreed Incoterms.
Final carton quantities, packing dimensions, shipping arrangements, payment terms and production lead times will be confirmed during the quotation process.
FREQUENTLY ASKED QUESTIONS (FAQ)
Q1: What type of door handle is the SP1011?
The SP1011 is a stainless steel D-shaped tubular pull handle mounted on a 300 × 100 mm rectangular backplate. It features a Ø45 mm circular top opening and six fixing holes for compatible door installations.
Q2: What are the dimensions of the SP1011 pull handle plate set?
The SP1011 features a 300 × 100 × 10 mm rectangular backplate, Ø19 mm tubular handle diameter and 62 mm handle projection. The top circular opening measures Ø45 mm, and the six fixing holes have a diameter of Ø6.5 mm.
Q3: What is the purpose of the 45mm circular opening?
The SP1011 includes a Ø45 mm circular opening near the top of the backplate. Buyers should confirm its intended application and compatibility with any associated lock, access-control device or other hardware before installation.
Q4: What door thickness is suitable for SP1011?
The engineering drawing specifies a reference door thickness range of 35–55 mm. Actual compatibility depends on the door construction, fixing system and installation requirements.
Q5: How many fixing holes does the SP1011 have?
The SP1011 features six fixing holes with a reference diameter of Ø6.5 mm. The engineering drawing specifies M5 or ST5.5 fixing screw options, subject to the approved mounting arrangement.
Q6: Is the SP1011 available in stainless steel 304 or 201?
The engineering reference includes a comparison of stainless steel grades 304 and 201. Customers should contact DEGOL to confirm which material grades are available for SP1011 and select the appropriate specification for their intended application.
Q7: What surface finishes are available for SP1011?
The reference drawing illustrates satin brushed stainless steel, polished stainless steel, PVD gold and PVD black. Buyers can contact DEGOL to confirm available finishes, customization requirements and applicable minimum order quantities.
Q8: Can DEGOL provide OEM and ODM customization for SP1011?
Yes. DEGOL welcomes OEM and ODM inquiries. Customers can discuss custom logos, surface finishes, packaging and product configuration requirements with the sales team.
Q9: What is the MOQ, and can I request samples before bulk ordering?
The minimum order quantity depends on the selected product specifications and customization requirements. Sample inquiries are welcome. Please contact DEGOL to confirm MOQ, sample availability, applicable charges and wholesale pricing.
Q10: Can DEGOL supply SP1011 pull handles to South American markets?
DEGOL welcomes wholesale and project inquiries from importers, distributors and contractors serving Brazil, Chile, Peru, Colombia, Argentina and other South American markets. Buyers can provide their order quantity, destination country and preferred shipping terms to discuss export arrangements.
CONTACT DEGOL – REQUEST A WHOLESALE QUOTE
Looking for a stainless steel D-shaped door pull handle on a 300mm rectangular backplate with a 45mm circular opening for your architectural door hardware range, wholesale distribution business or construction project?
Contact DEGOL Hardware for product specifications, technical drawings, available finishes, sample information, OEM/ODM customization and wholesale pricing.
Product Model: SP1011
Product Name: Stainless Steel D-Shaped Door Pull Handle on 300mm Rectangular Backplate with 45mm Round Cutout
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Whether you are an architectural hardware wholesaler, importer, building material distributor or construction project buyer, DEGOL welcomes your product sourcing inquiries.
For faster quotation processing, please provide your required quantity, preferred material grade, surface finish, mounting requirements, packaging requirements and destination country.
Request Your SP1011 Stainless Steel D-Shaped Pull Handle Plate Set Wholesale Quote Today.
