How to install aluminum alloy window handle

The installation method of aluminum alloy window handles mainly includes two steps: dismantling the old handle and installing the new handle

1.Dismantling the old handle:

Firstly, it is necessary to locate the outer cover at the handle and rotate it to expose the fixing screws.

Use a screwdriver to loosen the fixing screw and then pull out the handle outward. If the handle is difficult to pull out, you can shake the handle and slowly move it outward.

2.Install new handle:

Prepare a new handle of the same model and specifications.

Align the handle with the installation hole and insert the screw to tighten it.

Finally, rotate the outer cover to cover the fixing screws.

During the installation process, the following points should be noted:

1.Ensure that the screws and handle models used match to avoid problems caused by improper installation.

2.Before installation, clean the installation area at the handle with a cloth to ensure a secure and aesthetically pleasing installation.

3.After installation, check if the handle can rotate smoothly without obstruction.

4.In addition, the installation of aluminum alloy windows also requires attention to some details, such as fixing the window frame, filling gaps, and installing hardware accessories, to ensure the stability and sealing of the window