 |
ML1054
Degol
| Quantity: | |
|---|---|
The DEGOL ML1054 Mortise Hook Lock is an architectural door locking hardware product intended for applications requiring a mechanical hook-style locking arrangement.
Designed for evaluation in compatible sliding doors, aluminum-framed doors and metal door systems, the ML1054 belongs to the mortise hook lock category, where a shaped hook bolt engages with a suitable receiving strike or keeper.
Unlike a conventional straight deadbolt, a hook bolt locking mechanism is designed to engage with a corresponding receiving component through a hooked locking movement.
This type of locking hardware is commonly considered for sliding door assemblies and selected narrow-stile door systems where the lock configuration and door preparation are compatible.
For architectural hardware distributors, door manufacturers, building contractors and international wholesale buyers, DEGOL provides product sourcing services, technical information inquiries and OEM / ODM customization discussions.
Customers can contact DEGOL Hardware to confirm the actual ML1054 hook bolt design, lock body dimensions, compatible cylinders, available finishes and installation requirements before placing an order.
What Is a Mortise Hook Lock?
A mortise hook lock is a mechanical door locking device featuring a hook-shaped bolt that engages with a compatible strike plate or keeper.
The lock body is installed into a prepared mortise pocket within the door edge.
When the locking mechanism is operated, the hook bolt moves into its locking position and engages with the corresponding receiving component in the door frame.
This engagement arrangement is often associated with sliding doors, where the hook-shaped bolt can help retain the door in its closed position.
How Does a Hook Bolt Lock Work?
A typical mortise hook locking mechanism follows these principles:
The door is moved into its closed position.
The locking mechanism is operated using its compatible cylinder, thumb turn or other designated control.
The hook-shaped bolt moves into engagement with the strike or keeper.
The locking arrangement retains the door against normal opening movement.
Reversing the operating mechanism retracts or disengages the hook bolt.
Exact operation depends on the internal lock design.
Mortise Hook Lock vs. Standard Deadbolt Lock
Feature | Mortise Hook Lock | Standard Deadbolt Lock |
|---|---|---|
Bolt Shape | Hook-Shaped | Straight Bolt |
Common Application | Sliding and Compatible Metal Doors | Hinged Entry Doors |
Lock Engagement | Hook and Keeper | Bolt and Strike |
Installation | Mortise Body | Mortise or Bored Lock, Depending on Design |
Door Compatibility | Requires Matched Hook Keeper | Requires Matched Strike |
Operating Mechanism | Depends on Model | Depends on Model |
The ML1054 should be selected according to its verified product configuration rather than assuming interchangeability with conventional deadbolt locks.
Specification | Details |
|---|---|
Product Model | ML1054 |
Brand | DEGOL |
Product Name | Hook Lock |
Product Classification | Mechanical Mortise Lock |
Locking Type | Hook Bolt |
Installation Method | Mortise Installation |
Operating Mechanism | To Be Confirmed |
Surface Finish | Upon Inquiry |
Matching Keeper | To Be Confirmed |
Keys Included | Subject to Product Configuration |
Installation Accessories | According to Confirmed Product Kit |
Applicable Standards | Documentation Upon Verification |
OEM / ODM | Available for Inquiry |
Place of Origin | Guangdong, China |
Supplier | Jiangmen Degol Hardware Co., Ltd. |
Accurate dimensional information is essential when selecting a mortise hook lock for sliding doors, narrow-stile metal doors and other architectural door systems.
Unlike a conventional deadbolt, hook locks require correct alignment between the hook bolt and the corresponding keeper or strike.
The ML1054 should be installed using the current manufacturer-approved technical drawing.
Key Technical Dimensions
Measurement | Description |
|---|---|
Lock Case Height (H) | Overall vertical dimension of the lock body |
Lock Case Depth (D) | Depth of the mortise body |
Lock Case Thickness (T) | Width of the lock case |
Backset (B) | Distance from the faceplate reference edge to the operating centerline |
Faceplate Length (FL) | Overall length of the front plate |
Faceplate Width (FW) | Width of the front plate |
Faceplate Thickness (FT) | Thickness of the faceplate |
Hook Bolt Projection (HP) | Hook extension when locked |
Hook Bolt Height (HH) | Height of the hook element |
Hook Bolt Thickness (HT) | Thickness of the hook bolt |
Cylinder Centerline (CC) | Position of the cylinder or operating point |
Fixing Hole Spacing (MH) | Distance between mounting screw centers |
Keeper Opening (KO) | Required receiving opening in the strike |
Door Thickness (DT) | Compatible door thickness |
Door Profile Width (PW) | Minimum or required profile clearance |
Technical Drawing Documentation
Buyers should request:
Front and side dimension views
Lock body and case dimensions
Hook bolt geometry
Backset measurements
Faceplate dimensions
Cylinder installation details
Keeper and strike drawings
Door preparation dimensions
Mounting screw locations
Installation instructions
Important: Do not use technical dimensions from ML1024, ML1104, ML20054 or another DEGOL hook lock as the machining template for ML1054.
Material selection influences the mechanical operation, corrosion resistance, product appearance and maintenance requirements of architectural locking hardware.
DEGOL offers stainless steel mortise hook lock products in its broader door hardware portfolio. However, material specifications from other models do not automatically apply to ML1054.
Component | Material / Finish Information |
|---|---|
Mounting Screws | According to Product Kit |
Standard Surface Finish | To Be Confirmed |
Corrosion Resistance | Test Performance to Be Confirmed |
Surface Finish Options
Buyers may inquire about satin stainless steel appearance, polished stainless steel appearance, zinc-plated finishes or customized surface treatments, where supported by the actual ML1054 configuration.
Environmental Requirements
For doors exposed to humidity, outdoor air or corrosive environments, buyers should request verified material and surface protection specifications.
The corrosion resistance of the lock should be evaluated based on the installed environment and the performance of the complete locking assembly.
The DEGOL ML1054 Mortise Hook Lock is intended for consideration in architectural projects requiring hook-style mechanical locking.
1. Sliding Door Systems
Hook locks are commonly used on compatible sliding doors where a hooked bolt engages with a receiving keeper in the door frame.
2. Aluminum Door Systems
The lock may be evaluated for aluminum door profiles with sufficient internal space for the mortise mechanism.
3. Metal Door Applications
Suitable metal door systems can accommodate mortise hook locks where the door structure and fixing requirements are compatible.
4. Residential Sliding Doors
Hook locking arrangements may be used in suitable residential sliding door systems, subject to security and emergency release requirements.
5. Commercial Sliding Doors
The product may be considered for commercial door systems where the exact locking configuration meets project specifications.
6. Architectural Door Manufacturing
Door manufacturers can evaluate ML1054 for production programs after confirming dimensional compatibility and the appropriate keeper arrangement.
7. Door Hardware Replacement Projects
The model may be suitable for replacing compatible hook lock hardware when lock case size, backset, fixing positions and hook bolt geometry match.
8. Wholesale Door Hardware Distribution
The ML1054 may be included in architectural hardware sourcing programs for distributors seeking mechanical door locking products.
Door Type | Compatibility Guidance |
|---|---|
Aluminum Sliding Doors | Subject to lock case and door profile compatibility |
Metal Sliding Doors | Requires suitable mortise preparation and keeper |
Narrow-Stile Doors | Backset and profile clearance must be verified |
Residential Sliding Doors | Subject to door structure and locking requirements |
Commercial Sliding Doors | Based on approved hardware configuration |
Wooden Sliding Doors | Possible with appropriate mortise preparation |
Hinged Metal Doors | Only if the specific mechanism and keeper are designed for the application |
Security Doors | Requires verified security performance and compatibility |
Fire-Rated Doors | Only when approved for the applicable door assembly |
Emergency Exit Doors | Must satisfy keyless egress and other local safety requirements where applicable |
Door Compatibility Notice
Not every mortise hook lock is suitable for every sliding door. The door's frame construction, profile width, operating direction and keeper geometry must be verified before installation.
Step 1 – Confirm Door Compatibility
Check the door material, thickness, internal profile dimensions and opening arrangement.
Step 2 – Review the Technical Drawing
Confirm the ML1054 lock case, faceplate, backset, operating centerline and keeper dimensions.
Step 3 – Mark the Mortise Location
Determine the lock position according to the official installation template.
Step 4 – Prepare the Mortise Pocket
Machine the door edge to accommodate the lock body without compromising the required structural integrity.
Step 5 – Install the Hook Lock Body
Insert the lock case into the prepared pocket and secure the faceplate using the specified fasteners.
Step 6 – Install the Operating Hardware
Fit the compatible cylinder, thumb turn or other operating component according to the confirmed product design.
Step 7 – Position the Keeper
Install the matching keeper in the frame at the required engagement position.
Step 8 – Check Hook Engagement
With the door in its correct closed position, operate the mechanism and verify that the hook engages with the keeper without excessive friction.
Step 9 – Test Locking and Unlocking
Check repeated lock operation, hook bolt movement and full release.
Step 10 – Complete Final Inspection
Verify mounting security, door movement, alignment and any applicable safety requirements.
Installation Notice: Do not modify a hook lock or its receiving keeper in ways that interfere with safe unlocking or the door manufacturer's installation requirements.
1. Hook Bolt Locking Mechanism
The hook-style design provides a dedicated mechanical engagement arrangement for compatible door frames and keepers.
2. Suitable for Sliding Door Hardware Systems
Mortise hook locks are commonly used in sliding door configurations where conventional straight deadbolts may not suit the intended frame arrangement.
3. Concealed Mortise Installation
The lock body is fitted within a prepared door-edge pocket, supporting an integrated architectural hardware appearance.
4. Mechanical Door Locking
The product category provides a mechanical locking function without requiring an electronic locking system.
5. Architectural Door Integration
Hook locks can be specified alongside compatible handles, cylinders, strikes and other door hardware components.
6. Multiple Project Applications
The product category is relevant to residential sliding doors, commercial metal doors and compatible architectural door systems.
7. Replacement Hardware Potential
The ML1054 can be evaluated for compatible replacement work when all critical dimensions and operating requirements match.
8. Wholesale Sourcing Support
DEGOL provides direct inquiry channels for product specifications, technical drawings, samples and wholesale quotations.
9. OEM / ODM Opportunities
International distributors can discuss feasible custom branding, finishes and packaging options.
DEGOL Hardware accepts OEM and ODM inquiries for architectural door hardware products.
Customization requirements for the ML1054 Hook Lock may be reviewed according to technical feasibility, order quantity and manufacturing capacity.
OEM / ODM Service | Description |
|---|---|
OEM Branding | Customer logo and product identification |
Private Label Packaging | Branded packaging for distributors |
Surface Finish | Custom finish inquiries |
Material Requirements | Available material configurations subject to confirmation |
Lock Body Dimensions | Custom size inquiries subject to engineering review |
Hook Bolt Configuration | Product design review |
Keeper Compatibility | Matching strike and keeper requirements |
Cylinder Compatibility | Technical configuration discussion |
Packaging Customization | Printed boxes, labels and export cartons |
Barcode Labeling | Customer SKU and barcode requirements |
Sample Evaluation | Sample orders subject to availability |
Bulk Supply | Wholesale order planning |
OEM / ODM Requirements
Please provide the preferred lock dimensions, backset, hook bolt configuration, intended door type, required material, surface finish, estimated order quantity and target market.
Order Item | Details |
|---|---|
Product Model | ML1054 |
Product Name | Hook Lock |
Product Type | Mortise Hook Lock |
Brand | DEGOL |
Order Category | Wholesale / OEM / Project Supply |
Sales Unit | To Be Confirmed |
MOQ | Contact DEGOL |
Sample Availability | Upon Inquiry |
Standard Packaging | To Be Confirmed |
Product Kit Contents | According to Confirmed Configuration |
Mounting Screws | According to Product Kit |
OEM Packaging | Available for Inquiry |
Production Lead Time | Subject to Order Requirements |
Shipping Method | According to Commercial Terms |
Payment Terms | According to Quotation |
Country of Origin | China |
Supplier | Jiangmen Degol Hardware Co., Ltd. |
Wholesale Ordering Information
For an accurate quotation, buyers should provide the required quantity, destination market, lock body dimensions, preferred material, surface finish, compatible door type and expected delivery schedule.
Jiangmen Degol Hardware Co., Ltd. – China Architectural Door Lock Manufacturer & Supplier
DEGOL Hardware is a Guangdong-based architectural hardware company offering door lock and building hardware products for international wholesale and project procurement.
Its published product range includes mortise locks, hook lock designs, door handles, cylinders, hinges, door closers and associated architectural hardware.
Mortise Lock Product Range
DEGOL publishes different mortise hook and multi-bolt lock products for residential and commercial door applications.
The company maintains product categories covering sliding door hook bolt lock hardware.
Wholesale and Project Orders
DEGOL provides contact channels for distributors, importers, contractors and project buyers seeking bulk hardware purchasing.
OEM / ODM Inquiry Support
Buyers may discuss branding, packaging, technical specifications and project-specific product requirements with DEGOL.
Product Documentation
Customers can request technical drawings, confirmed specifications, installation information, product samples and available certification documents.
International Business Contact
Company: Jiangmen Degol Hardware Co., Ltd.
Website: degolhardware.com
WhatsApp: +86 13725946499
Email: info@degolhardware.com
Q1: What is the DEGOL ML1054 Hook Lock?
The DEGOL ML1054 is the model being presented as a mortise hook lock for compatible architectural door hardware applications. Its exact hook bolt configuration and specifications should be verified against the manufacturer's current product drawing.
Q2: What is a mortise hook lock used for?
A mortise hook lock is used for mechanical locking in compatible door systems, commonly including sliding doors, where a hook-shaped bolt engages with a suitable keeper.
Q3: Is ML1054 suitable for aluminum sliding doors?
It may be suitable if the lock body, backset, hook bolt and keeper dimensions match the aluminum door profile. Compatibility requires verification.
Q4: Can ML1054 be installed on metal doors?
Metal door installation may be possible when suitable mortise preparation, frame reinforcement and matching keeper hardware are available.
Q5: What is the difference between a hook lock and a deadbolt lock?
A hook lock uses a hook-shaped bolt that engages with a keeper, while a conventional deadbolt uses a straight bolt that extends into a strike opening.
Q6: What is the backset of the ML1054 Hook Lock?
The exact backset has not been verified. Buyers should request the official ML1054 drawing before door preparation.
Q7: What material is the ML1054 made from?
The exact lock body, faceplate and hook bolt materials require confirmation. Other DEGOL hook locks use stainless steel, but those specifications should not be automatically assigned to ML1054.
Q8: What finishes are available for ML1054?
Available finishes depend on the confirmed product configuration. Buyers can inquire about satin, polished and custom finish requirements.
Q9: Does ML1054 include a lock cylinder?
Cylinder inclusion has not been confirmed. Buyers should verify the supplied product kit and compatible cylinder dimensions.
Q10: Does the ML1054 come with a strike plate or keeper?
A compatible keeper is important for hook engagement, but whether it is supplied in the standard kit must be confirmed.
Q11: Can the ML1054 Hook Lock be used on wooden doors?
It may be used on compatible wooden door systems if the door construction permits correct mortise installation and keeper alignment.
Q12: Is ML1054 suitable for fire doors?
Fire door suitability has not been verified. The lock must have appropriate approval for the intended fire-rated door assembly.
Q13: Can DEGOL customize the dimensions of ML1054?
Buyers can submit custom dimension requests for technical review. Availability depends on production feasibility and order requirements.
Q14: Does DEGOL provide OEM / ODM services?
DEGOL accepts OEM and ODM inquiries covering branding, packaging, materials and technical requirements.
Q15: Can I purchase ML1054 Hook Locks in bulk?
Wholesale customers can contact DEGOL to discuss MOQ, samples, product configurations and quantity-based pricing.
Q16: How can I request a wholesale quotation for ML1054?
Contact DEGOL Hardware by WhatsApp, email or its official website. Include the ML1054 model, order quantity, intended door application, required backset, material, finish and shipping destination.
Looking for an ML1054 Mortise Hook Lock for your architectural door hardware range? Contact DEGOL Hardware for product specifications, technical drawings, hook bolt dimensions, available finishes, sample information and wholesale pricing.
Product Model: ML1054
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your ML1054 Mortise Hook Lock Wholesale Quote Today.
