 |
LH1116
Degol
| Quantity: | |
|---|---|
The DEGOL LH1116 Flowing Curved Door Lever Handle Set is a contemporary architectural door hardware design featuring a smooth sweeping lever profile, a gently tapered grip, and a coordinated round mounting rose.
Designed with flowing lines and rounded transitions, the LH1116 offers a refined alternative to conventional straight tubular and angular door lever handles.
The lever features a broad, rounded connecting section near the mounting rose. Its body extends outward in a smooth, continuous curve before gradually narrowing toward a softly rounded tip.
The illustrated gripping area has a flattened oval cross-section, giving the handle a distinctive sculpted appearance without the pronounced twisting surface found on some other decorative lever designs.
LH1116 is presented with two material options: zinc alloy or aluminum alloy. The actual material selected for production must be confirmed with DEGOL before ordering.
Zinc alloy is commonly considered for decorative lever handle designs requiring detailed shapes and smooth surface transitions. Aluminum alloy offers another material option for modern architectural hardware. The suitability of either material depends on the actual alloy grade, production process, surface treatment, and intended application.
The supplied engineering reference drawing indicates a lever length of approximately 125 mm, a projection of approximately 60 mm, and a grip section measuring approximately 22 × 10 mm.
The handle is shown with a round mounting rose approximately 52 mm in diameter and 10 mm thick. Matching round Euro-profile-style keyhole escutcheons are also illustrated.
The reference drawing shows a silver metallic finish. Typical finish categories listed in the supplied specification include satin chrome, polished chrome, matte black, and PVD decorative finishes such as gold.
With its elegant flowing silhouette and contemporary styling, the LH1116 can be considered for compatible residential, apartment, hotel, office, and commercial interior doors.
Jiangmen Degol Hardware Co., Ltd. welcomes wholesale and OEM / ODM inquiries from door hardware importers, architectural hardware distributors, door manufacturers, project contractors, and international hardware brands.
Modern flowing curved lever handle design
Smooth sculpted body with a tapered outer end
Rounded lever neck and soft surface transitions
Flattened oval grip profile
Zinc alloy or aluminum alloy material options
Satin chrome reference appearance
Polished chrome, matte black, and PVD finish inquiries
Approx. 125 mm reference lever length
Approx. 60 mm reference projection
Approx. 22 × 10 mm reference grip section
Approx. Ø52 mm round mounting rose
Approx. 10 mm rose thickness
Matching round Euro-profile-style escutcheons illustrated
Approx. 8 × 8 mm square spindle reference
Suitable for modern architectural hardware collections
Wholesale and OEM / ODM inquiries welcomed
Technical Notice: The supplied LH1116 engineering drawing is marked “Reference Only – Not for Manufacturing.” Dimensions, mounting details, material selection, finishes, and component configurations must be verified against approved manufacturer documentation or a physical sample.
The DEGOL LH1116 is a modern lever-on-round-rose door handle design featuring a gently sweeping curved lever, flattened oval grip, and smooth tapered tip.
The lever is intended to operate a compatible door latch or lock mechanism through a spindle connection.
Unlike a conventional straight lever, the LH1116 has a continuous flowing profile that changes gradually from its rounded neck to its slimmer outer end.
1. Flowing Curved Lever
The lever extends outward from the mounting rose in a smooth sweeping arc.
Its curvature creates a soft, contemporary appearance.
2. Rounded Connecting Neck
The handle begins with a rounded connecting section that transitions into the wider gripping area.
3. Flattened Oval Grip
The reference grip cross-section is approximately 22 × 10 mm.
This shape distinguishes the LH1116 from round tubular lever handles.
4. Tapered Outer Tip
The lever narrows gradually toward a smooth rounded end.
5. Subtle Lever Height Change
The reference drawing indicates an approximate 8 mm lever height drop.
The actual installed geometry and measurement datum require confirmation.
6. Round Mounting Rose
The illustrated circular rose measures approximately Ø52 mm.
7. Compact Rose Thickness
The reference rose thickness is approximately 10 mm.
8. Square Spindle Connection
The drawing illustrates an approximately 8 × 8 mm square spindle.
9. Coordinated Keyhole Escutcheons
Matching round Euro-profile-style escutcheons are illustrated for a coordinated door hardware appearance.
10. Zinc Alloy or Aluminum Alloy Construction
The product is specified for consideration in zinc alloy or aluminum alloy.
The exact material, alloy grade, and construction method must be confirmed for each order.
The exploded reference drawing shows:
Two curved lever handles
Two round decorative roses
Internal mounting plates
One square spindle
Two matching round keyhole escutcheons
The final commercial packing list must be confirmed. A mortise lock body, lock cylinder, and fixing screws should not be assumed to be included unless specified.
| Parameter | Specification |
|---|---|
| Brand | DEGOL |
| Model Number | LH1116 |
| Product Name | Flowing Curved Zinc Alloy or Aluminum Alloy Door Lever Handle Set |
| Product Type | Door Lever Handle Set on Round Rose |
| Product Category | Architectural Door Hardware |
| Lever Style | Flowing / Curved / Tapered |
| Grip Shape | Flattened Oval |
| Design Style | Modern / Contemporary / Minimalist |
| Material Option 1 | Zinc Alloy |
| Material Option 2 | Aluminum Alloy |
| Reference Appearance | Satin Silver / Satin Chrome |
| Typical Finish Categories | Satin Chrome / Polished Chrome / Matte Black / PVD |
| Lever Length | 125 mm – Reference |
| Handle Projection | 60 mm – Reference |
| Lever Height Drop | Approx. 8 mm – Reference |
| Grip Cross-Section | 22 × 10 mm – Reference |
| Rose Shape | Round |
| Rose Diameter | Ø52 mm – Reference |
| Rose Thickness | 10 mm – Reference |
| Escutcheon Shape | Round |
| Escutcheon Diameter | Ø52 mm – Reference |
| Escutcheon Thickness | 10 mm – Reference |
| Keyhole Type | Euro Profile Style – Compatibility TBC |
| Mounting Plate Diameter | Ø38 mm – Reference |
| Mounting Holes | 2 × Ø5 mm Through – Reference |
| Mounting-Hole Pitch | Approx. 38 mm – Verify |
| Spindle Size | 8 × 8 mm Square – Reference |
| Reference Door Thickness | 35–55 mm |
| Return Spring | Not Verified |
| Lock Compatibility | Subject to Selected Lock Mechanism |
| Applications | Residential / Hotel / Office / Commercial Interior |
| Suitable Door Materials | Compatible Wooden and Metal Doors |
| OEM / ODM | Available for Inquiry |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Specification Disclaimer: The values above come from the supplied LH1116 reference drawing and have not been confirmed as approved production tolerances. The actual zinc alloy or aluminum alloy configuration must be verified before purchase, installation, or manufacturing.
The supplied engineering drawing illustrates the DEGOL LH1116 through assembled, exploded, elevation, plan, profile, and installation views.
The drawing includes:
Assembled perspective view
Exploded assembly perspective view
Front view of a single lever
Top view of a single lever
Side view of a single lever
Round rose detail
Euro-profile-style escutcheon detail
Mounting plate detail
Lever grip cross-section
Door installation section
Reference specification table
The illustrated lever length is 125 mm.
This measurement is relevant when assessing the handle's visual proportions, operating clearance, and compatibility with surrounding door hardware.
The exact finished length and measurement datum must be verified.
The reference projection is 60 mm.
This measurement is relevant to hand clearance and the installed distance between the door surface and the outermost lever profile.
The reference drawing indicates an approximate 8 mm height drop.
This describes a feature of the illustrated curved lever geometry.
The exact datum and final production geometry must be confirmed.
The grip cross-section is illustrated as approximately 22 mm wide and 10 mm thick.
The section is flattened and oval-shaped rather than cylindrical or square.
Because the lever is tapered, the cross-section may vary along its length.
The LH1116 lever has a rounded, sculpted profile that gradually narrows toward the tip.
The reference drawing does not specify the exact curvature radii, taper angles, or manufacturing tolerances.
The illustrated mounting rose measures approximately 52 mm in diameter.
Its circular design complements the soft flowing lever geometry.
The decorative rose is shown with a reference thickness of 10 mm.
The matching keyhole escutcheon has a reference diameter of 52 mm.
The reference escutcheon thickness is 10 mm.
The drawing illustrates a Euro-profile-style keyhole opening.
The exact opening dimensions and compatibility with the selected lock cylinder must be confirmed.
The internal mounting plate is illustrated with a reference diameter of 38 mm.
The reference mounting plate shows two approximately 5 mm through-holes.
The actual fixing method and screw dimensions must be verified.
The notes identify a reference mounting-hole pitch of approximately 38 mm.
Because the mounting plate itself is also listed as approximately Ø38 mm, the fixing geometry requires special verification.
Do not use these preliminary mounting dimensions to prepare drilling holes.
The exploded assembly shows an approximately 8 × 8 mm square spindle.
The actual spindle length and lock compatibility must be confirmed.
The reference installation section indicates a door thickness range of approximately 35–55 mm.
Actual compatibility depends on the approved spindle, mounting components, lock mechanism, and door construction.
| Component | Reference Dimension |
|---|---|
| Lever Length | 125 mm |
| Handle Projection | 60 mm |
| Lever Height Drop | Approx. 8 mm |
| Grip Section | 22 × 10 mm |
| Rose Diameter | Ø52 mm |
| Rose Thickness | 10 mm |
| Escutcheon Diameter | Ø52 mm |
| Escutcheon Thickness | 10 mm |
| Mounting Plate Diameter | Ø38 mm |
| Mounting-Hole Pitch | Approx. 38 mm – Verify |
| Mounting Holes | 2 × Ø5 mm |
| Spindle | 8 × 8 mm Square |
| Door Thickness | 35–55 mm |
Drawing Notice: All dimensions are in millimeters. The reference drawing is not an approved manufacturing drawing or installation drilling template.
Zinc alloy is a material commonly used for decorative architectural door handles.
Depending on the selected alloy and manufacturing process, it can be suitable for detailed curved profiles, rounded surfaces, and decorative handle shapes.
For LH1116, zinc alloy may be considered for the sculpted curved lever design.
Potential project considerations include:
Decorative curved lever geometry
Smooth surface transitions
Detailed handle shaping
Compatibility with selected surface finishes
Residential and commercial interior applications
The actual zinc alloy grade, production method, construction, and performance requirements must be confirmed.
Aluminum alloy is another material option for modern architectural door hardware.
Its relatively low density compared with many zinc alloys can be useful where component weight is an important design consideration.
Depending on the selected alloy and manufacturing process, aluminum alloy can also support contemporary curved lever designs.
Potential project considerations include:
Lightweight material selection
Modern architectural styling
Smooth lever surfaces
Decorative finish requirements
Compatible interior door applications
The actual aluminum alloy grade, construction method, finish compatibility, and mechanical properties must be confirmed.
| Feature | Zinc Alloy | Aluminum Alloy |
|---|---|---|
| Material Category | Zinc-Based Alloy | Aluminum-Based Alloy |
| General Density | Typically Higher | Typically Lower |
| Curved Decorative Designs | Possible | Possible |
| Detailed Shapes | Process-Dependent | Process-Dependent |
| Surface Finishing | Depends on Alloy and Preparation | Depends on Alloy and Preparation |
| Component Weight | Depends on Geometry and Construction | Depends on Geometry and Construction |
| Mechanical Performance | Grade-Dependent | Grade-Dependent |
| Corrosion Resistance | Alloy and Finish-Dependent | Alloy and Finish-Dependent |
Neither material should be described as universally stronger, more durable, or better for all applications without specifying the exact alloy, construction, coating, and testing requirements.
The supplied drawing shows a satin silver metallic appearance.
Satin chrome is listed as a typical finish category.
This understated metallic appearance complements the flowing curved shape of LH1116.
Polished chrome is another finish category mentioned in the supplied reference.
Customers may inquire about a brighter reflective appearance for modern residential and hospitality interiors.
Matte black may be considered for contemporary, minimalist, and industrial-inspired interior projects.
Availability must be confirmed for the selected material.
PVD gold is identified as an example of a decorative finish category.
The actual coating process, color, durability, and availability depend on the selected base material and manufacturer specifications.
Customers may inquire about:
Satin Chrome
Polished Chrome
Matte Black
Gold-Tone Decorative Finishes
Brushed Metallic Finishes
Other Project-Specific Colors
These are finish inquiries rather than a confirmed standard LH1116 finish range.
For wholesale orders, customers should confirm:
Whether the ordered version uses zinc alloy or aluminum alloy
The exact alloy grade
Whether the lever is solid or hollow
The manufacturing method
The surface preparation and coating process
Finish durability requirements
Intended installation environment
Relevant product testing or certification requirements
Material Notice: LH1116 is described here as a zinc alloy or aluminum alloy door handle. It should not be marketed as a stainless steel handle unless DEGOL separately confirms a stainless steel version.
The DEGOL LH1116 Flowing Curved Door Lever Handle Set is suitable for evaluation in a range of contemporary interior design projects.
The smooth curved lever design can complement contemporary homes and apartments.
LH1116 may be considered for compatible interior bedroom doors using an appropriate latch or privacy locking system.
The flowing silhouette can coordinate with modern residential interior finishes.
The handle's contemporary appearance makes it a potential option for apartment door hardware schedules.
LH1116 can be considered for hospitality interiors where its final configuration meets the relevant durability, locking, and installation requirements.
The curved design can complement meeting rooms, administrative spaces, and compatible office interior doors.
The handle can be evaluated as a decorative alternative to straight tubular lever handles.
Door manufacturers may inquire about integration with compatible door constructions and locking systems.
The LH1116 offers a curved lever design category for importers and hardware wholesalers.
International hardware brands may inquire about customized material, finish, branding, and packaging configurations.
| Door Type | Application Consideration |
|---|---|
| Wooden Interior Doors | Subject to mounting and lock compatibility |
| MDF Interior Doors | Subject to fixing and door construction |
| Composite Interior Doors | Subject to approved installation requirements |
| Residential Bedroom Doors | Compatible latch or privacy lock required |
| Apartment Interior Doors | Suitable for evaluation |
| Office Interior Doors | Suitable for evaluation |
| Hotel Interior Doors | Performance and security requirements must be verified |
| Metal Interior Doors | Appropriate mounting preparation required |
| Commercial Interior Doors | Subject to project requirements |
| Exterior Entrance Doors | Environmental suitability must be confirmed |
| Fire-Rated Doors | Requires appropriate certification and approval |
| Frameless Glass Doors | Direct mounting compatibility not established |
| Sliding Doors | Not intended as a conventional sliding-door pull |
Before ordering, confirm:
Door material
Door thickness
Lock case or latch type
Spindle size and length
Mounting plate configuration
Fixing-hole locations
Lever handing
Required lever clearance
Escutcheon dimensions
Cylinder compatibility
Applicable project standards
The supplied drawing does not establish a fire rating, emergency-exit certification, or suitability for any specific certified door assembly.
The following instructions provide a general installation overview for lever-on-round-rose door hardware.
Always follow the approved LH1116 installation instructions and the selected lock manufacturer's requirements.
Confirm the door thickness, construction, and lock mechanism.
The supplied drawing indicates a reference door thickness of 35–55 mm, but actual compatibility must be verified.
Inspect the supplied lever handles, roses, mounting plates, spindle, screws, and any included escutcheons.
Compare the components with the approved packing list.
Determine the correct orientation for the LH1116 curved levers on each side of the door.
Confirm whether the final product is reversible or requires a handed configuration.
Mark the spindle opening and fixing positions according to approved manufacturer instructions.
Do not drill using the preliminary reference drawing.
Fit the compatible latch or mortise lock according to the lock manufacturer's instructions.
Insert the approved square spindle through the lock follower.
Verify the correct spindle dimensions and engagement.
Fit the LH1116 lever assemblies to the appropriate sides of the door.
Check the orientation of the curved tapered grips.
Attach the mounting components using the specified screws and fixing system.
Install the decorative rose covers as required.
If Euro-profile-style escutcheons are included, fit them according to the approved installation instructions.
Verify the selected cylinder and keyhole compatibility.
Check:
Smooth lever movement
Correct latch operation
Secure mounting
Proper handle alignment
Sufficient operating clearance
Correct lever return where specified
Correct locking operation where applicable
The actual mounting-hole positions, spindle length, fixing screws, lever handing, and lock compatibility must be confirmed before installation.
The LH1116 features a smooth sweeping lever profile that creates a contemporary architectural appearance.
The lever gradually narrows toward its outer tip, producing a refined silhouette.
The handle's rounded connecting neck and flowing surface provide a softer visual alternative to angular lever designs.
The approximately 22 × 10 mm reference grip section gives the handle a distinct shape compared with conventional round tubular handles.
Zinc alloy can be considered for detailed decorative lever designs, subject to confirmed specifications.
Aluminum alloy provides another material option for buyers evaluating modern curved lever handles.
The approximately Ø52 mm reference rose complements the curved lever design.
The illustrated satin silver finish can coordinate with a wide range of modern interior finishes.
Customers may inquire about satin chrome, polished chrome, matte black, and PVD finishes.
The illustrated round Euro-profile-style escutcheons provide a coordinated appearance.
The LH1116 can be considered for compatible residential, office, hotel, and commercial interior applications.
The design provides a basis for inquiries involving custom materials, finishes, branding, and packaging.
Jiangmen Degol Hardware Co., Ltd. welcomes OEM and ODM inquiries for modern architectural door hardware, including curved lever handle designs such as LH1116.
Customers may submit drawings, material requirements, surface finish references, and packaging specifications for technical evaluation.
Potential private-label requirements include:
Customer logo identification
Custom model numbers
Product labels
Barcode stickers
Branded packaging
Customized instruction sheets
Export carton markings
Customers may request evaluation of:
Zinc Alloy
Aluminum Alloy
The final material selection depends on the approved alloy grade, design requirements, manufacturing process, and order conditions.
Potential finish inquiries include:
Satin Chrome
Polished Chrome
Matte Black
Decorative PVD Finishes
Project-Specific Metallic Colors
Actual availability must be confirmed.
Customers may submit requests involving:
Lever length
Handle projection
Grip width
Grip thickness
Lever curvature
Tapered tip dimensions
Rounded neck geometry
Rose dimensions
Design modifications may require new tooling, engineering drawings, and sample approval.
Customers may inquire about decorative rose sizes, cover profiles, and fixing arrangements.
Matching keyhole escutcheons may be discussed according to the selected locking system.
Potential packaging options include:
Private-label boxes
Protective internal packaging
Printed labels
Barcode identification
Branded installation instructions
Export carton markings
Customers may submit architectural drawings, door schedules, finish requirements, and estimated purchasing quantities.
Where available, physical samples may be requested to confirm material, dimensions, surface finish, and installation compatibility.
OEM / ODM Notice: All customization options are subject to technical feasibility, MOQ, tooling requirements, sample approval, and agreed commercial terms.
| Item | Information |
|---|---|
| Product Model | LH1116 |
| Brand | DEGOL |
| Product Name | Flowing Curved Door Lever Handle Set |
| Material Options | Zinc Alloy or Aluminum Alloy |
| Final Material | To Be Selected and Confirmed |
| Reference Finish | Satin Chrome / Satin Silver Appearance |
| Other Finish Inquiries | Polished Chrome / Matte Black / PVD Gold |
| Lever Handles | Opposing Pair Illustrated; Supply TBC |
| Round Roses | Illustrated; Final Supply TBC |
| Mounting Plates | Illustrated; Final Supply TBC |
| Square Spindle | 8 × 8 mm Reference |
| Fixing Screws | Subject to Packing List |
| Keyhole Escutcheons | Pair Illustrated; Inclusion TBC |
| Mortise Lock Body | Not Confirmed as Included |
| Lock Cylinder | Not Confirmed as Included |
| MOQ | Subject to Quotation |
| Sample Availability | On Request |
| OEM Packaging | Subject to Confirmation |
| Production Lead Time | Subject to Order Confirmation |
| Payment Terms | To Be Negotiated |
| Shipping Terms | Subject to Quotation |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Step 1 – Send Your Inquiry
Provide model LH1116, required quantity, preferred material, finish, and destination country.
Step 2 – Confirm the Material
Specify whether the requested configuration should use zinc alloy or aluminum alloy.
Step 3 – Verify Product Specifications
Confirm lever dimensions, rose dimensions, spindle, mounting arrangement, and lock compatibility.
Step 4 – Request Samples
Contact DEGOL regarding sample availability, pricing, and shipping arrangements.
Step 5 – Confirm OEM / ODM Requirements
Submit branding, packaging, or custom design requirements where applicable.
Step 6 – Review the Quotation
Confirm unit pricing, MOQ, lead time, packaging, payment terms, and shipping arrangements.
Step 7 – Approve the Final Configuration
Review the approved product specifications and sample where required.
Step 8 – Arrange Production and Delivery
Production and shipment follow the confirmed purchase order and agreed commercial terms.
Product Model: LH1116
Required Quantity
Zinc Alloy or Aluminum Alloy
Preferred Finish
Door Thickness
Spindle and Lock Requirements
Escutcheon Requirements
OEM / ODM Requirements
Packaging Preferences
Destination Country
Required Delivery Schedule
Jiangmen Degol Hardware Co., Ltd. is a China-based manufacturer and export supplier serving international customers with door hardware and related architectural fittings.
DEGOL offers architectural hardware sourcing and OEM / ODM cooperation for distributors, wholesalers, project contractors, and professional buyers.
Customers may inquire about:
Zinc alloy door handles
Aluminum alloy door handles
Modern curved lever handles
Round rose lever handles
Square rose lever handles
Decorative door handle sets
Door escutcheons
Door locks and mortise lock bodies
Door hinges
Related architectural door accessories
Specific model availability must be confirmed.
DEGOL welcomes inquiries involving customer drawings, samples, material requirements, and project specifications.
Custom product development is subject to technical evaluation.
For LH1116, customers may inquire about zinc alloy and aluminum alloy configurations.
The actual alloy grade, construction, and manufacturing process must be confirmed before production.
Customers may discuss satin chrome, polished chrome, matte black, and other decorative finish requirements.
Final availability depends on the approved material and production process.
The preliminary LH1116 drawing illustrates lever handles, decorative roses, mounting plates, a square spindle, and matching keyhole escutcheons.
The final commercial configuration must be confirmed.
Buyers may request information about inspection procedures covering:
Product dimensions
Surface appearance
Lever assembly
Mounting fit
Spindle compatibility
Lever operation
Finish requirements
Packaging condition
LH1116-specific test reports, certifications, and performance ratings should be requested separately.
International customers may submit requirements for:
Material customization
Lever geometry modifications
Decorative finishes
Private-label branding
Custom packaging
Project-specific configurations
DEGOL welcomes inquiries from:
Architectural hardware importers
Door handle wholesalers
Hardware distributors
Door manufacturers
Building material suppliers
Construction contractors
Hotel project buyers
International hardware brands
OEM / ODM customers
For LH1116, customers may request:
Confirmed material specifications
Approved product drawings
Available surface finishes
Lever dimensions
Rose dimensions
Mounting plate details
Spindle specifications
Lock compatibility information
Matching escutcheon options
Sample information
Packaging specifications
Wholesale quotations
Factory Capability Notice: General DEGOL company capabilities do not establish the availability, certification, production capacity, or exact manufacturing process of any particular LH1116 configuration. Model-specific details require confirmation.
The DEGOL LH1116 is a modern flowing curved door lever handle design featuring a tapered grip and round mounting rose.
LH1116 is presented with zinc alloy or aluminum alloy material options. The final material must be confirmed for each order.
Zinc alloy is one of the specified material options. Buyers should confirm the actual production availability and alloy grade with DEGOL.
Aluminum alloy is another specified material option. Its availability and exact alloy grade require confirmation.
LH1116 is described here as a zinc alloy or aluminum alloy product, not as a stainless steel handle.
A stainless steel version should not be assumed to exist without separate confirmation.
Zinc alloys generally have higher density than aluminum alloys. Their mechanical properties, corrosion resistance, finishing characteristics, and suitability depend on the specific grade and manufacturing process.
The appropriate choice depends on the required weight, finish, budget, mechanical performance, and intended application.
DEGOL should confirm the specifications of the available versions before buyers compare them.
The handle has a modern, contemporary design with a smooth flowing curve and tapered outer tip.
Yes. The supplied drawing shows a gently sweeping curved lever profile.
Yes. The reference drawing illustrates a circular mounting rose.
The reference lever length is 125 mm.
The reference handle projection is 60 mm.
The drawing indicates an approximate 8 mm height drop.
The reference grip section measures approximately 22 × 10 mm.
The illustrated grip has a flattened oval cross-section rather than a round tubular profile.
Yes. The reference drawing shows a lever that gradually narrows toward its rounded outer end.
The reference rose diameter is 52 mm.
The reference rose thickness is 10 mm.
The drawing illustrates two round Euro-profile-style escutcheons.
Their inclusion in the standard commercial package must be confirmed.
The reference escutcheon diameter is 52 mm.
The reference escutcheon thickness is 10 mm.
No. Compatibility depends on the exact escutcheon opening and selected lock cylinder.
The reference drawing illustrates an 8 × 8 mm square spindle.
The spindle length has not been confirmed.
The reference drawing indicates a door thickness range of 35–55 mm.
Final compatibility must be verified.
LH1116 may be considered for compatible wooden interior doors when the mounting system and lock mechanism are suitable.
The reference drawing identifies metal doors as a potential application.
Actual installation compatibility must be confirmed.
The design can be considered for hotel interiors, subject to the required lock compatibility, durability, and project specifications.
LH1116 may be considered for compatible office interior doors.
Exterior suitability has not been confirmed.
Material, coating, environmental exposure, and corrosion resistance requirements should be reviewed.
No LH1116 fire-rating documentation has been provided.
Use on a fire-rated door requires the appropriate certification and assembly approval.
Satin chrome is listed as a typical finish in the supplied reference drawing.
Actual availability must be confirmed.
Polished chrome is another finish category listed in the reference specification.
Customers should confirm availability for the selected material.
Matte black is listed as a typical finish category.
Actual production availability requires confirmation.
The reference drawing mentions PVD decorative finishes such as gold.
Customers may inquire about gold-tone options.
The reference mounting-plate diameter is approximately 38 mm.
The reference notes indicate an approximate pitch of 38 mm.
Because the mounting-plate diameter is also listed as approximately 38 mm, this dimension must be verified before drilling or manufacturing.
The drawing shows two approximately 5 mm through-holes.
The drawing illustrates opposing lever assemblies, but reversibility has not been confirmed.
The supplied drawing does not confirm the presence of an internal return spring.
The reference drawing does not establish that a mortise lock body is included.
DEGOL welcomes OEM / ODM inquiries involving material selection, surface finishes, branding, packaging, and possible dimensional modifications.
Customers may inquire about private-label branding and packaging.
Availability depends on the confirmed order requirements.
Customers may contact DEGOL to inquire about sample availability, cost, and shipping arrangements.
The confirmed MOQ has not been provided.
It should be requested according to the required material, finish, and packaging configuration.
LH1116 features a smooth flowing curved lever with a gently tapered outer tip.
LH1115 features a more pronounced sculpted twisted wave profile.
The two designs should be presented separately in architectural hardware collections.
DEGOL welcomes wholesale inquiries from architectural hardware importers, distributors, door manufacturers, and professional buyers.
Contact DEGOL via WhatsApp or email with the model number, preferred material, finish, order quantity, and destination country.
Looking for a modern flowing curved door lever handle made from zinc alloy or aluminum alloy, with a round mounting rose and matching Euro-profile-style escutcheon options?
Contact DEGOL Hardware for confirmed material specifications, approved technical drawings, available finishes, sample information, OEM / ODM options, packaging details, and wholesale pricing.
Product Model: LH1116
Product Name: LH1116 Flowing Curved Zinc Alloy or Aluminum Alloy Door Lever Handle Set on Round Rose with Euro Profile Escutcheons
Material Options: Zinc Alloy or Aluminum Alloy
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your LH1116 Zinc Alloy or Aluminum Alloy Curved Door Lever Handle Set Wholesale Quote Today.
