 |
LH1117
Degol
| Quantity: | |
|---|---|
The DEGOL LH1117 Modern Curved Neck Oval Grip Door Lever Handle Set is a contemporary architectural door hardware design featuring an elegant curved connecting neck, an elongated tapered oval grip, and a coordinated round mounting rose.
Unlike conventional straight tubular door handles, the LH1117 combines a slender curved neck with a fuller spindle-shaped gripping section. This distinctive design creates a balanced appearance, with a smooth transition from the mounting rose to the gently tapered handle.
The grip has a rounded oval profile, becoming wider toward the central section and narrowing gradually toward both ends. Its elongated silhouette gives the LH1117 a refined architectural character suitable for modern interior design collections.
A clearly defined transition between the curved neck and the oval grip is visible in the supplied reference drawing. The illustration also shows a satin metallic grip appearance with more reflective highlights around the connecting neck and rose.
These are visual characteristics of the drawing; the exact finish combination and manufacturing construction must be confirmed.
The LH1117 is presented with zinc alloy or aluminum alloy material options. Buyers should confirm which material, alloy grade, and construction method will be supplied for their specific order.
The preliminary engineering drawing indicates a reference lever length of approximately 135 mm, a handle projection of approximately 60 mm, and a maximum lever height of approximately 20 mm.
The illustrated oval grip section measures approximately 20 × 12 mm.
The handle is shown with a round mounting rose approximately 52 mm in diameter and 10 mm thick. Matching round Euro-profile-style keyhole escutcheons are also illustrated.
Typical decorative finish categories identified in the reference drawing include satin chrome, polished chrome, matt nickel, and PVD finishes such as gold and black.
The flowing curved neck and tapered oval grip can complement contemporary residential, apartment, hotel, office, and commercial interior design projects.
Jiangmen Degol Hardware Co., Ltd. welcomes wholesale and OEM / ODM inquiries from architectural hardware importers, door handle distributors, building material suppliers, door manufacturers, contractors, and international hardware brands.
Modern curved neck door lever handle design
Elegant elongated oval gripping section
Distinct transition between curved neck and grip
Smooth tapered spindle-shaped handle profile
Zinc alloy or aluminum alloy material options
Satin silver reference appearance
Decorative chrome, nickel, and PVD finish inquiries
Approx. 135 mm reference lever length
Approx. 60 mm reference projection
Approx. 20 mm maximum lever height
Approx. 20 × 12 mm oval grip section
Approx. Ø52 mm round mounting rose
Approx. 10 mm rose thickness
Matching Euro-profile-style escutcheons illustrated
Approx. 8 × 8 mm square spindle reference
Wholesale and OEM / ODM inquiries welcomed
Important Technical Notice: The supplied LH1117 engineering drawing is marked “Reference Only – Not for Manufacturing.” The actual material, dimensions, finish, mounting geometry, and standard product configuration must be confirmed with DEGOL before purchasing, installation, or manufacturing.
The DEGOL LH1117 is a modern lever-on-round-rose door handle design characterized by a curved connecting neck and a tapered oval grip.
A lever door handle operates a compatible latch or lock mechanism through a spindle connection.
The LH1117 is distinguished by the contrast between its narrower curved neck and fuller elongated gripping section.
Rather than using a continuous straight bar, the design introduces a visible transition from the curved neck into the oval grip.
1. Curved Connecting Neck
The lever begins with a slender connecting section that curves outward from the round mounting rose.
This curved neck creates a smooth architectural transition between the door surface and the gripping area.
2. Elongated Oval Grip
The main gripping section has a spindle-shaped oval profile.
The illustrated grip is fuller around the middle and gradually tapers toward its rounded outer tip.
3. Distinct Neck-to-Grip Transition
A visible transition separates the curved neck from the elongated oval grip.
This feature is a defining visual characteristic of the LH1117.
4. Flattened Oval Cross-Section
The reference grip cross-section measures approximately 20 × 12 mm.
Its shape is oval rather than cylindrical or square.
5. Rounded Outer Tip
The outer end narrows smoothly to a rounded tip.
6. Round Mounting Rose
The reference drawing shows a circular mounting rose approximately 52 mm in diameter.
7. Decorative Rose Profile
The illustrated rose thickness is approximately 10 mm.
8. Square Spindle Connection
The preliminary exploded view shows an approximately 8 × 8 mm square spindle.
9. Matching Keyhole Escutcheons
Two round Euro-profile-style escutcheons are illustrated.
Their exact dimensions, cylinder compatibility, and inclusion in the commercial package must be confirmed.
10. Zinc Alloy or Aluminum Alloy Material Options
LH1117 is presented with zinc alloy or aluminum alloy construction options.
The actual production material and alloy grade must be confirmed for each order.
The preliminary assembly drawing shows:
Two curved neck oval grip lever handles
Two round decorative mounting roses
Two internal mounting plates
One square spindle
Two matching round keyhole escutcheons
The final packing list must be confirmed. A mortise lock case, lock cylinder, fixing screws, or additional installation accessories should not be assumed to be included unless specified.
| Parameter | Specification |
|---|---|
| Brand | DEGOL |
| Model Number | LH1117 |
| Product Name | Curved Neck Oval Grip Door Lever Handle Set |
| Product Category | Architectural Door Hardware |
| Product Type | Door Lever Handle Set on Round Rose |
| Lever Style | Curved Neck / Elongated Oval Grip |
| Grip Shape | Tapered Oval / Spindle-Shaped |
| Design Style | Modern / Contemporary / Refined |
| Material Option 1 | Zinc Alloy |
| Material Option 2 | Aluminum Alloy |
| Reference Appearance | Satin Silver with Reflective Metallic Accents |
| Typical Finish Categories | Satin Chrome / Polished Chrome / Matt Nickel / PVD |
| Lever Length | 135 mm – Reference |
| Handle Projection | 60 mm – Reference |
| Maximum Lever Height | 20 mm – Reference |
| Oval Grip Section | 20 × 12 mm – Reference |
| Rose Shape | Round |
| Rose Diameter | Ø52 mm – Reference |
| Rose Thickness | 10 mm – Reference |
| Escutcheon Shape | Round |
| Escutcheon Diameter | Ø52 mm – Reference |
| Escutcheon Thickness | 10 mm – Reference |
| Keyhole Style | Euro Profile – Compatibility TBC |
| Mounting Plate Diameter | Ø38 mm – Reference |
| Mounting Holes | 2 × Ø5 mm Through – Reference |
| Mounting-Hole Pitch | Approx. 38 mm – Requires Verification |
| Spindle | 8 × 8 mm Square – Reference |
| Door Thickness | 35–55 mm – Reference |
| Return Spring | Not Verified |
| Lock Compatibility | Subject to Selected Lock Mechanism |
| Suitable Door Materials | Compatible Wooden / Metal / Interior Doors |
| Applications | Residential / Apartment / Hotel / Office / Commercial Interior |
| OEM / ODM | Available for Inquiry |
| MOQ | To Be Confirmed |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Specification Disclaimer: All dimensions are based on the supplied preliminary reference drawing. They have not been verified as final LH1117 production specifications. Buyers should obtain approved technical documentation before ordering or preparing installation holes.
The supplied LH1117 engineering reference drawing illustrates the handle through several technical views.
These include:
Assembled perspective view
Exploded assembly perspective view
Front view of a single lever
Top view of a single lever
Side view of a single lever
Round rose detail
Euro-profile-style escutcheon detail
Mounting plate detail
Oval grip cross-section
Door installation section
Reference specification table
The reference drawing indicates a lever length of 135 mm.
This dimension is relevant when assessing the visual proportions of the handle and its relationship to the mounting rose.
The exact measurement datum and production tolerance must be confirmed.
The illustrated handle projection is approximately 60 mm.
This dimension helps determine the installed distance between the door surface and the outermost part of the lever.
Actual installed projection depends on the confirmed product geometry and mounting configuration.
The reference specification indicates a maximum lever height of approximately 20 mm.
This corresponds to the fuller gripping section shown in the technical views.
The drawing includes a cross-sectional view of the grip.
The illustrated section measures approximately 20 mm wide and 12 mm thick.
Its oval geometry is one of the defining features of LH1117.
Because the grip tapers toward both ends, the cross-section may vary along its length.
The illustrated neck curves outward from the round mounting rose before connecting to the oval grip.
The drawing does not specify the exact neck radius, cross-sectional dimensions, or curvature tolerances.
A clearly visible transition is shown between the narrower curved neck and the fuller oval grip.
This visual division should not be interpreted as proof of a detachable component, separate material, or two-piece construction.
The actual manufacturing structure must be confirmed.
The reference rose diameter is 52 mm.
The circular rose creates a balanced visual contrast with the elongated oval grip.
The illustrated rose thickness is 10 mm.
Actual installed thickness may depend on the approved cover and mounting arrangement.
The matching round Euro-profile-style escutcheon has a reference diameter of 52 mm.
The reference escutcheon thickness is 10 mm.
The drawing illustrates a Euro-profile-style keyhole opening.
Exact cutout dimensions, lock cylinder compatibility, and accessory inclusion must be confirmed.
The internal mounting plate is illustrated with a reference diameter of 38 mm.
The reference mounting plate includes two approximately 5 mm through-holes.
The final fixing screw size and hole positions must be verified.
The drawing notes indicate an approximate mounting-hole pitch of 38 mm.
Because the same drawing lists an approximately Ø38 mm mounting plate, the fixing geometry requires special verification.
Do not use these preliminary dimensions as a drilling template.
The exploded assembly shows an approximately 8 × 8 mm square spindle.
The actual spindle length and compatibility with the selected lock mechanism must be confirmed.
The reference installation section indicates a door thickness range of approximately 35–55 mm.
Actual suitability depends on the final mounting system, spindle length, door construction, and lock configuration.
| Component | Reference Dimension |
|---|---|
| Lever Length | 135 mm |
| Handle Projection | 60 mm |
| Maximum Lever Height | 20 mm |
| Oval Grip Section | 20 × 12 mm |
| Rose Diameter | Ø52 mm |
| Rose Thickness | 10 mm |
| Escutcheon Diameter | Ø52 mm |
| Escutcheon Thickness | 10 mm |
| Mounting Plate Diameter | Ø38 mm |
| Mounting-Hole Pitch | Approx. 38 mm – Verify |
| Mounting Holes | 2 × Ø5 mm |
| Square Spindle | 8 × 8 mm |
| oor Thickness | 35–55 mm |
Technical Drawing Notice: The supplied drawing is for reference only and is not approved for manufacturing, drilling, or production inspection.
Zinc alloy is a common material category for decorative architectural door hardware.
Depending on the selected grade and manufacturing process, zinc alloy can be used to produce detailed handle geometries, rounded transitions, and sculpted profiles.
For LH1117, zinc alloy is one of the specified material options.
Potential considerations include:
Curved decorative lever geometry
Defined neck-to-grip transitions
Smooth oval gripping surfaces
Compatibility with selected decorative finishes
Interior architectural hardware applications
The actual zinc alloy grade, construction, manufacturing method, and mechanical performance must be confirmed.
Aluminum alloy is another material option for modern architectural door hardware.
Its generally lower density compared with zinc alloys may be relevant where product weight is an important consideration.
Depending on the specific grade and production process, aluminum alloy can be used for contemporary curved lever designs.
Potential considerations include:
Lightweight material selection
Modern architectural appearance
Smooth curved handle profiles
Decorative surface treatment requirements
Compatible residential and commercial interior applications
The actual aluminum alloy grade, construction method, and performance specifications must be confirmed.
| Feature | Zinc Alloy | Aluminum Alloy |
|---|---|---|
| Material Category | Zinc-Based Alloy | Aluminum-Based Alloy |
| Typical Density | Generally Higher | Generally Lower |
| Curved Handle Designs | Process-Dependent | Process-Dependent |
| Detailed Decorative Shapes | Possible | Possible |
| Component Weight | Depends on Design and Construction | Depends on Design and Construction |
| Surface Finish Compatibility | Depends on Alloy and Preparation | Depends on Alloy and Preparation |
| Mechanical Performance | Grade-Dependent | Grade-Dependent |
| Corrosion Resistance | Alloy and Coating-Dependent | Alloy and Coating-Dependent |
| LH1117 Configuration | Confirm Before Ordering | Confirm Before Ordering |
Neither material should be described as universally stronger or more durable without identifying the exact alloy grade, construction, coating, and applicable testing requirements.
The supplied illustration shows a satin silver metallic grip appearance.
Satin chrome is listed as a typical finish category in the reference drawing.
This understated metallic look complements the elongated oval grip and curved connecting neck.
Polished chrome is another finish category listed in the reference specification.
Customers may inquire about a brighter reflective appearance.
Matt nickel is listed among the typical finish options in the drawing.
Its subdued metallic appearance may complement contemporary interior design schemes.
PVD gold is mentioned as an example of a decorative finish category.
The actual coating process, color, durability, and availability must be confirmed for the selected base material.
Black decorative finishes are also referenced.
Customers may inquire about matte black or other black-tone finishes, subject to production feasibility.
The reference image shows a satin-looking oval grip with more reflective highlights around the connecting neck and mounting components.
This should be described as an illustrated metallic appearance, not as a verified two-tone finish specification.
The actual surface treatment may be uniform or customized depending on the approved product configuration.
Customers may inquire about:
Satin Chrome
Polished Chrome
Matt Nickel
Satin Silver
Brushed Metallic Finishes
Matte Black
PVD Gold
Other Project-Specific Decorative Finishes
These are finish inquiries rather than confirmed standard LH1117 variants.
Before placing a wholesale order, buyers should verify:
Zinc alloy or aluminum alloy selection
Exact alloy grade
Solid or hollow construction
Manufacturing method
Surface preparation
Coating or plating process
Color and appearance requirements
Finish durability
Intended installation environment
Relevant project standards
Material Notice: LH1117 is presented as a zinc alloy or aluminum alloy door handle. It should not be advertised as stainless steel unless a separate stainless steel configuration is formally confirmed.
The DEGOL LH1117 Curved Neck Oval Grip Door Lever Handle Set can be considered for contemporary architectural interior projects.
The elegant curved neck and tapered oval grip can complement modern home interiors.
LH1117 may be considered for compatible bedroom doors using a suitable latch or privacy locking system.
The refined oval grip can coordinate with contemporary residential door finishes.
The modern design may be considered for apartment and condominium door hardware schedules.
The LH1117 design can complement hospitality interiors where the final product meets the required security, durability, and locking specifications.
The curved lever design may suit meeting rooms, administrative spaces, and compatible office interior doors.
LH1117 provides a decorative alternative to straight tubular and angular lever handles.
Door manufacturers may evaluate the handle for integration with compatible doors and locking systems.
The LH1117 offers a distinctive oval grip design category for hardware importers, distributors, and wholesalers.
International brands may inquire about material, finish, branding, and packaging customization.
| Door Type | Application Consideration |
|---|---|
| Wooden Interior Doors | Subject to mounting and lock compatibility |
| MDF Interior Doors | Subject to door construction and fixing requirements |
| Composite Interior Doors | Subject to approved installation specifications |
| Residential Bedroom Doors | Compatible latch or privacy lock required |
| Apartment Interior Doors | Suitable for evaluation |
| Office Interior Doors | Suitable for evaluation |
| Hotel Interior Doors | Security and durability requirements must be verified |
| Metal Interior Doors | Appropriate mounting preparation required |
| Commercial Interior Doors | Subject to project specifications |
| Exterior Entrance Doors | Environmental suitability must be confirmed |
| Fire-Rated Doors | Requires appropriate certification and approval |
| Frameless Glass Doors | Direct mounting compatibility not established |
| Sliding Doors | Not intended as a conventional sliding-door pull |
Before selecting LH1117, confirm:
Door material and construction
Door thickness
Required latch or mortise lock
Spindle dimensions
Rose mounting arrangement
Fixing-hole locations
Lever handing
Handle projection and clearance
Keyhole escutcheon dimensions
Cylinder compatibility
Applicable project requirements
The supplied reference drawing does not establish a fire rating, emergency-exit certification, or suitability for any specific certified door assembly.
The following steps provide a general installation overview for lever-on-round-rose door hardware.
Actual installation must follow the approved LH1117 instructions and the selected lock manufacturer's requirements.
Confirm the door thickness, material, construction, and lock mechanism.
The reference drawing indicates a door thickness range of 35–55 mm, but actual compatibility must be verified.
Check the supplied lever handles, roses, mounting plates, spindle, screws, and accessories.
Compare all components with the approved packing list.
Determine the correct orientation for the curved neck and oval grip on each side of the door.
Verify whether the final LH1117 product is reversible or requires a specific handing arrangement.
Mark the spindle opening and fixing positions using approved installation instructions.
Do not use the preliminary engineering reference drawing as a drilling template.
Fit the compatible latch or mortise lock according to its manufacturer's instructions.
Insert the approved square spindle through the lock follower.
Verify spindle size, length, and engagement.
Place the LH1117 lever assemblies on the appropriate sides of the door.
Check the orientation of the curved connecting neck and tapered oval grip.
Attach the mounting components using the specified fixing system.
Fit the decorative rose covers as required.
Avoid overtightening screws.
If matching Euro-profile-style escutcheons are supplied, install them according to the approved instructions.
Verify compatibility with the selected lock cylinder.
Check:
Smooth lever rotation
Correct latch retraction
Secure mounting
Proper handle alignment
Sufficient hand clearance
No interference with adjacent fittings
Correct lever return where specified
Correct locking operation where applicable
Final mounting-hole positions, spindle length, fixing screws, handing, escutcheon dimensions, and lock compatibility must be confirmed before installation.
The LH1117 features a slender curved connecting neck that creates a recognizable modern silhouette.
The elongated spindle-shaped grip provides a refined alternative to conventional round tubular handles.
The grip becomes fuller toward the center and narrows toward the rounded outer tip.
The visible transition between the curved neck and the oval grip adds visual detail to the design.
Zinc alloy can be considered for decorative curved handle designs, subject to confirmed specifications.
Aluminum alloy provides another material choice for customers evaluating contemporary door hardware.
The approximately Ø52 mm reference rose complements the handle's curved profile.
The illustrated satin silver appearance can coordinate with a wide range of modern interior finishes.
Customers may inquire about chrome, nickel, black, and gold-tone finishes.
The illustrated round Euro-profile-style escutcheons provide a coordinated design option.
LH1117 can be considered for compatible residential, apartment, office, hotel, and commercial interior projects.
The design provides a basis for inquiries involving custom materials, finishes, branding, and packaging.
Jiangmen Degol Hardware Co., Ltd. welcomes OEM and ODM inquiries for architectural door hardware, including modern curved neck and oval grip lever handle designs such as LH1117.
International customers may submit drawings, reference samples, material requirements, finish specifications, and packaging instructions for technical evaluation.
Potential private-label requirements include:
Customer logo identification
Customized product model numbers
Product labels
Barcode stickers
Branded packaging
Printed installation instructions
Export carton markings
Customers may request evaluation of:
Zinc Alloy
Aluminum Alloy
The final material depends on the approved alloy grade, product geometry, manufacturing method, and commercial requirements.
Potential finish inquiries include:
Satin Chrome
Polished Chrome
Matt Nickel
Matte Black
Decorative PVD Finishes
Project-Specific Metallic Colors
Actual availability must be confirmed.
Customers may submit requests involving:
Lever length
Handle projection
Oval grip width
Grip thickness
Grip taper
Curved neck geometry
Neck-to-grip transition
Rounded tip dimensions
Rose dimensions
Any modification may require revised drawings, tooling, and sample approval.
Customers may inquire about rose diameter, cover thickness, decorative profile, and mounting arrangement.
Matching round keyhole escutcheons may be discussed according to the selected locking system.
Potential packaging requirements include:
Private-label product boxes
Protective internal packaging
Branded labels
Barcode identification
Customized instruction sheets
Export carton markings
Customers may submit architectural drawings, door schedules, finish references, and estimated purchasing quantities.
Where available, physical samples may be requested to verify material, dimensions, finish, appearance, and installation compatibility before bulk ordering.
OEM / ODM Notice: All customization requests are subject to technical feasibility, tooling requirements, MOQ, sample approval, and agreed production lead times.
| Item | Information |
|---|---|
| Product Model | LH1117 |
| Brand | DEGOL |
| Product Name | Curved Neck Oval Grip Door Lever Handle Set |
| Material Options | Zinc Alloy or Aluminum Alloy |
| Final Material | To Be Selected and Confirmed |
| Reference Appearance | Satin Silver Metallic |
| Typical Finish Inquiries | Satin Chrome / Polished Chrome / Matt Nickel / PVD |
| Lever Handles | Opposing Pair Illustrated; Supply TBC |
| Round Roses | Illustrated; Final Supply TBC |
| Mounting Plates | Illustrated; Final Supply TBC |
| Square Spindle | 8 × 8 mm Reference |
| Fixing Screws | Subject to Confirmed Packing List |
| Keyhole Escutcheons | Pair Illustrated; Inclusion TBC |
| Mortise Lock Body | Not Confirmed as Included |
| Lock Cylinder | Not Confirmed as Included |
| MOQ | Subject to Quotation |
| Sample Availability | On Request |
| OEM Packaging | Subject to Confirmation |
| Production Lead Time | Subject to Order Confirmation |
| Payment Terms | To Be Negotiated |
| Shipping Terms | Subject to Quotation |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Step 1 – Submit Your Inquiry
Provide DEGOL with model LH1117, required quantity, preferred material, finish, and destination country.
Step 2 – Confirm the Material
Specify whether the required configuration should use zinc alloy or aluminum alloy.
Step 3 – Verify Product Specifications
Confirm the lever dimensions, curved neck geometry, oval grip dimensions, rose size, spindle, mounting arrangement, and lock compatibility.
Step 4 – Request Samples
Contact DEGOL regarding sample availability, pricing, and shipping arrangements.
Step 5 – Confirm OEM / ODM Requirements
Submit branding artwork, finish references, packaging instructions, or custom drawings where applicable.
Step 6 – Review the Wholesale Quotation
Confirm unit pricing, MOQ, packaging, payment terms, production lead time, and delivery conditions.
Step 7 – Approve the Final Product Configuration
Review the approved technical specifications and physical sample where required.
Step 8 – Arrange Production and Shipment
Production, inspection, packaging, and shipment follow the confirmed purchase order and agreed commercial terms.
Product Model: LH1117
Required Order Quantity
Preferred Material: Zinc Alloy or Aluminum Alloy
Required Surface Finish
Door Thickness
Lock and Spindle Requirements
Escutcheon Requirements
OEM / ODM Requirements
Packaging Preferences
Destination Country
Expected Delivery Schedule
Jiangmen Degol Hardware Co., Ltd. is a China-based hardware manufacturer and export supplier serving international customers with door hardware and related architectural fittings.
DEGOL welcomes wholesale, OEM, and ODM inquiries from distributors, importers, door manufacturers, project contractors, and professional purchasing teams.
Customers may inquire about:
Zinc alloy door handles
Aluminum alloy door handles
Modern curved lever handles
Oval grip door lever handles
Round rose door handles
Square rose door handles
Decorative door handle sets
Door escutcheons
Door locks and mortise lock bodies
Door hinges
Related architectural door accessories
Specific model availability must be confirmed.
DEGOL welcomes inquiries involving customer drawings, reference samples, material specifications, and project requirements.
Custom development requests are subject to technical evaluation.
For LH1117, customers may inquire about zinc alloy and aluminum alloy configurations.
The exact material grade, construction, and manufacturing process must be confirmed before production.
Customers may discuss chrome, nickel, black, gold-tone, and other decorative finish requirements.
Actual availability depends on the approved material and production process.
The preliminary LH1117 drawing illustrates opposing lever handles, round roses, mounting plates, a square spindle, and matching keyhole escutcheons.
The final commercial configuration must be confirmed.
Buyers may request information about inspection procedures covering:
Dimensional consistency
Surface appearance
Lever assembly
Mounting fit
Spindle compatibility
Lever operation
Finish requirements
Packaging condition
LH1117-specific certifications, test reports, and performance ratings must be verified separately.
International customers may submit requirements for:
Material customization
Lever geometry modifications
Decorative finishes
Private-label branding
Customized packaging
Project-specific hardware configurations
DEGOL welcomes inquiries from:
Architectural hardware importers
Door handle wholesalers
Regional hardware distributors
Door manufacturers
Building material suppliers
Construction contractors
Hotel project purchasing teams
International hardware brands
OEM / ODM customers
For LH1117, customers may request:
Verified product technical drawings
Material specifications
Available finishes
Lever dimensions
Oval grip section details
Rose dimensions
Mounting plate specifications
Spindle dimensions
Lock compatibility information
Matching escutcheon options
Sample information
Packaging specifications
Wholesale quotations
Factory Capability Notice: General DEGOL company information does not establish the availability, production capacity, certification, or exact manufacturing process of any particular LH1117 configuration. Model-specific details require confirmation.
The DEGOL LH1117 is a modern curved neck door lever handle featuring an elongated tapered oval grip and a round mounting rose.
LH1117 is presented with zinc alloy or aluminum alloy material options. The final material must be confirmed for each order.
Zinc alloy is one of the specified material options. Actual production availability and alloy grade should be confirmed with DEGOL.
Aluminum alloy is another specified material option. Availability and exact alloy grade require confirmation.
LH1117 is described here as a zinc alloy or aluminum alloy handle, not as a stainless steel handle.
Zinc alloys generally have higher density than aluminum alloys. Mechanical performance, corrosion resistance, and finishing characteristics depend on the specific grades and manufacturing processes.
The appropriate choice depends on the required weight, finish, budget, mechanical performance, and intended application.
The handle has a modern, contemporary design with a curved connecting neck and tapered oval grip.
Its defining feature is the combination of a slender curved neck and a fuller spindle-shaped oval grip.
Yes. The supplied drawing shows a curved connecting neck extending from the round mounting rose.
The grip has an elongated oval shape, becoming fuller toward the center and tapering toward its rounded ends.
The reference lever length is 135 mm.
The reference handle projection is 60 mm.
The reference maximum lever height is 20 mm.
The reference grip section measures approximately 20 × 12 mm.
The illustrated grip has an oval cross-section rather than a round tubular profile.
The drawing shows a visible transition between the grip and the neck, but it does not establish whether they are manufactured as separate components.
The preliminary drawing does not confirm whether the handle is solid or hollow.
Yes. The supplied drawing illustrates a circular mounting rose.
The reference rose diameter is 52 mm.
The reference rose thickness is 10 mm.
The reference drawing illustrates two matching round Euro-profile-style escutcheons. Their inclusion in the standard package must be confirmed.
The reference escutcheon diameter is 52 mm.
The reference escutcheon thickness is 10 mm.
No. Exact cutout dimensions and lock cylinder compatibility must be verified.
The reference drawing illustrates an 8 × 8 mm square spindle.
The actual spindle length has not been confirmed.
The reference drawing indicates a door thickness range of 35–55 mm.
LH1117 may be considered for compatible wooden interior doors when the mounting system and lock mechanism are suitable.
The reference drawing identifies metal doors as a potential application. Actual compatibility must be confirmed.
The design can be considered for hotel interiors, subject to security, durability, and locking requirements.
LH1117 may be considered for compatible office interior doors.
Exterior suitability has not been confirmed. Material, coating, corrosion resistance, and environmental exposure requirements should be reviewed.
No LH1117 fire-rating documentation has been provided. Use on a fire-rated door requires appropriate certification and assembly approval.
The reference drawing lists satin chrome, polished chrome, matt nickel, and PVD decorative finishes. Actual availability must be confirmed.
Satin chrome is listed as a typical finish category. Customers should confirm availability for the selected material.
Polished chrome is listed in the reference specification. Actual production availability requires confirmation.
Customers may inquire about gold-tone and black decorative finishes, including PVD options where technically feasible.
The drawing shows different metallic highlights between the neck and grip, but it does not confirm a two-tone production finish.
The reference mounting-plate diameter is approximately 38 mm.
The reference notes indicate an approximate mounting-hole pitch of 38 mm. Because the mounting plate is also listed as Ø38 mm, the fixing geometry requires verification before drilling.
The reference drawing shows two approximately 5 mm through-holes.
The drawing illustrates opposing lever assemblies, but reversibility has not been confirmed.
The supplied drawing does not verify the presence of an internal return spring.
The drawing does not establish that a mortise lock body is included.
DEGOL welcomes OEM / ODM inquiries involving material selection, finishes, branding, packaging, and possible dimensional modifications.
Customers may inquire about private-label branding and customized packaging.
Customers may contact DEGOL to inquire about sample availability, cost, and shipping arrangements.
The confirmed MOQ has not been provided. It should be requested according to the required material, finish, and packaging configuration.
LH1117 features a slender curved connecting neck and a fuller, clearly defined tapered oval grip.
LH1116 features a more continuous flowing curved lever with a gradually tapered profile.
The two designs should be presented separately in architectural hardware collections.
LH1117 emphasizes a curved neck and elongated oval grip.
LH1115 features a more pronounced sculpted twisted wave profile.
DEGOL welcomes wholesale inquiries from architectural hardware importers, distributors, door manufacturers, contractors, and professional buyers.
Buyers may request verified dimensions and approved technical documentation from DEGOL.
The supplied preliminary reference drawing should not be used for manufacturing or drilling.
Contact DEGOL via WhatsApp at +86 13725946499 or email info@degolhardware.com.
Provide model LH1117, required quantity, preferred material, finish, door thickness, lock requirements, packaging preferences, and destination country.
Looking for a modern curved neck door lever handle featuring an elegant tapered oval grip, zinc alloy or aluminum alloy material options, and a coordinated round mounting rose?
Contact DEGOL Hardware for confirmed product specifications, approved technical drawings, material options, decorative finishes, sample information, OEM / ODM requirements, packaging details, and wholesale pricing.
Product Model: LH1117
Product Name: LH1117 Modern Curved Neck Oval Grip Zinc Alloy or Aluminum Alloy Door Lever Handle Set on Round Rose with Euro Profile Escutcheons
Material Options: Zinc Alloy or Aluminum Alloy
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your LH1117 Zinc Alloy or Aluminum Alloy Curved Neck Oval Grip Door Lever Handle Set Wholesale Quote Today
