 |
LH1051
Degol
| Quantity: | |
|---|---|
The DEGOL LH1051 Modern Straight Cylindrical Door Lever Handle on Round Rose is a contemporary architectural door hardware design featuring a clean cylindrical lever, a short connecting neck, a circular mounting rose, and a refined satin nickel finish.
Designed for modern interior doors, the LH1051 emphasizes simplicity, balanced proportions, and understated architectural styling.
Unlike curved, twisted, or sculpted lever handles, the LH1051 uses a straight round-bar gripping section with a smooth cylindrical surface and a softly rounded end.
The handle is connected to its circular mounting rose through a short neck with an angled transition. This creates a distinctive L-shaped overall configuration while maintaining a clean, minimalist appearance.
The supplied product engineering sheet identifies zinc alloy or aluminum alloy as the material options and satin nickel as the specified finish.
The actual alloy grade, manufacturing process, and availability of each material version should be confirmed before ordering.
According to the supplied engineering drawing, the LH1051 has a reference overall length of 128 mm, a projection of 64 mm, and a cylindrical lever diameter of approximately 19 mm.
The round mounting rose is specified as approximately Ø52 mm with a thickness of 10 mm.
Additional reference dimensions include an 18 mm neck length, 16 mm neck height, R9 lever-end radius, Ø38 mm fixing base, and 8 × 8 mm square spindle.
The drawing identifies a reference door thickness range of 35–45 mm and an intended application for interior doors.
With its streamlined shape and satin nickel appearance, the LH1051 may be considered for modern residential interiors, apartments, offices, hospitality projects, and architectural hardware collections.
Jiangmen Degol Hardware Co., Ltd. welcomes wholesale and OEM / ODM inquiries from door handle importers, architectural hardware distributors, building material suppliers, door manufacturers, contractors, and international hardware brands.
Modern straight cylindrical lever handle design
Minimalist round-bar grip
Short neck with angled transition
Smooth rounded lever end
Zinc alloy or aluminum alloy material options
Satin nickel finish specified in the drawing
Approx. 128 mm reference overall length
Approx. 64 mm reference projection
Approx. Ø19 mm cylindrical lever diameter
Approx. 18 mm neck length
Approx. 16 mm neck height
Approx. R9 lever-end radius
Approx. Ø52 mm round mounting rose
Approx. 10 mm rose thickness
Approx. Ø38 mm fixing base
Approx. 8 × 8 mm square spindle
Reference door thickness of 35–45 mm
Intended for compatible interior doors
Wholesale and OEM / ODM inquiries welcomed
Technical Notice: The dimensions above are taken from the supplied LH1051 engineering sheet. They should be verified against approved manufacturer documentation before manufacturing, drilling, installation, or bulk ordering.
The DEGOL LH1051 is a modern lever-on-round-rose door handle featuring a straight cylindrical gripping bar, a short connecting neck, and a circular decorative mounting rose.
The handle is designed to operate a compatible latch or lock mechanism through a spindle connection.
Its defining visual feature is a straight, round-bar lever rather than a curved or decorative sculpted grip.
The handle has a clean horizontal appearance with a short perpendicular connecting section near the rose.
1. Straight Cylindrical Lever
The main gripping section has a straight round-bar profile.
Its simple geometry creates a clean contemporary appearance.
2. Approximately Ø19 mm Grip
The engineering sheet specifies a reference lever diameter of 19 mm.
This provides a defined cylindrical profile for the handle.
3. Smooth Rounded Tip
The lever terminates in a rounded end.
The drawing identifies a reference end radius of R9.
4. Short Connecting Neck
The lever is supported by a compact neck between the grip and the mounting rose.
5. Angled Neck Transition
The neck features an angled shoulder where it joins the cylindrical grip.
This creates a subtle geometric detail without interrupting the handle's minimalist styling.
6. Round Mounting Rose
The LH1051 is shown with a circular decorative rose.
7. Satin Nickel Finish
The engineering sheet identifies satin nickel as the finish.
Its muted metallic appearance complements contemporary interiors.
8. Zinc Alloy or Aluminum Alloy Material
The drawing identifies zinc alloy and aluminum alloy as material options.
The final material must be confirmed for each production configuration.
9. Square Spindle Connection
The rear fixing-base view illustrates an 8 × 8 mm square spindle opening.
10. Interior Door Application
The supplied product sheet identifies interior doors as the intended application.
The engineering sheet illustrates:
One straight cylindrical lever handle
One circular decorative rose
A short connecting neck
A rear fixing base
A square spindle opening
The drawing does not show a complete pair of handles, keyhole escutcheons, mortise lock body, lock cylinder, or final packaging configuration.
The quantity and type of supplied components must be confirmed with DEGOL.
| Parameter | Specification |
|---|---|
| Brand | DEGOL |
| Model Number | LH1051 |
| Product Name | Straight Cylindrical Door Lever Handle on Round Rose |
| Product Category | Architectural Door Hardware |
| Product Type | Lever Handle on Round Rose |
| Design Style | Modern / Minimalist / Contemporary |
| Lever Shape | Straight Cylindrical Bar |
| Grip Profile | Round |
| Lever End | Rounded |
| Neck Design | Short Neck with Angled Transition |
| Material Option 1 | Zinc Alloy |
| Material Option 2 | Aluminum Alloy |
| Finish | Satin Nickel |
| Other Finishes | Subject to Inquiry |
| Overall Length | 128 mm – Drawing Reference |
| Projection | 64 mm – Drawing Reference |
| Lever Diameter | Ø19 mm – Drawing Reference |
| Neck Length | 18 mm – Drawing Reference |
| Neck Height | 16 mm – Drawing Reference |
| Lever-End Radius | R9 mm – Drawing Reference |
| Rose Shape | Round |
| Rose Diameter | Ø52 mm – Key Dimensions Table |
| Rose Thickness | 10 mm – Drawing Reference |
| Fixing Base Diameter | Ø38 mm – Drawing Reference |
| Spindle | 8 × 8 mm Square – Drawing Reference |
| Spindle Length | To Be Confirmed |
| Door Thickness | 35–45 mm – Drawing Reference |
| Main Application | Interior Doors |
| OEM / ODM | Available for Inquiry |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Specification Disclaimer: The supplied drawing includes a Ø52 mm rose specification and a separate 54 mm dimension callout. These measurements require clarification before production or installation.
The supplied LH1051 product engineering sheet presents the handle through several technical views.
The drawing includes:
Product rendering
Front view
Side elevation
Top view showing projection
Rear fixing-base view
Key dimensions table
All dimensions are presented in millimeters.
The engineering sheet specifies an overall length of 128 mm.
This is a principal reference dimension for evaluating the handle's proportions and space requirements.
The precise measurement datum should be confirmed against an approved technical drawing.
The key dimensions table specifies a projection of 64 mm.
This dimension is relevant to the installed clearance of the handle.
The exact measurement points should be confirmed before use in architectural specifications.
The cylindrical gripping section has a specified reference diameter of 19 mm.
This dimension distinguishes LH1051 from flat, rectangular, and oval-section lever designs.
The engineering sheet identifies a reference neck length of 18 mm.
The neck provides the transition between the mounting area and the main cylindrical grip.
The reference neck height is 16 mm.
This measurement relates to the geometry of the connecting section shown in the side elevation.
The rounded outer end is identified with a reference radius of R9.
The exact relationship between the nominal Ø19 mm lever diameter and the R9 end geometry should be verified in the approved production drawing.
The front view and key dimensions table identify a rose diameter of Ø52 mm.
The round rose complements the straight cylindrical grip.
The reference rose thickness is 10 mm.
The actual installed profile may depend on the final decorative cover and mounting arrangement.
The rear fixing-base view identifies a reference diameter of Ø38 mm.
The drawing does not provide complete fixing-hole spacing or screw specifications.
The rear fixing-base view identifies an 8 × 8 mm square spindle connection.
Actual spindle length, material, and lock compatibility must be confirmed.
The product information table identifies a reference door thickness range of 35–45 mm.
Actual compatibility depends on the mounting system, spindle length, door construction, and selected latch or lock mechanism.
The drawing contains a vertical 54 mm callout in the side elevation while the main specification identifies the round rose as Ø52 mm.
These values should not be treated as interchangeable without confirmation.
| Component | Reference Dimension |
|---|---|
| Overall Length | 128 mm |
| Projection | 64 mm |
| Lever Diameter | Ø19 mm |
| Neck Length | 18 mm |
| Neck Height | 16 mm |
| Lever-End Radius | R9 mm |
| Rose Diameter | Ø52 mm |
| Rose Thickness | 10 mm |
| Fixing Base Diameter | Ø38 mm |
| Square Spindle | 8 × 8 mm |
| Door Thickness | 35–45 mm |
Drawing Notice: The supplied engineering sheet is useful for preliminary product identification and comparison. An approved technical drawing is required before drilling, tooling, production, or final installation.
Zinc alloy is a material category commonly used in decorative architectural door hardware.
Depending on the selected alloy grade and manufacturing process, it can be suitable for lever handle designs featuring defined geometric transitions and decorative surface finishes.
For LH1051, zinc alloy is one of the materials identified in the engineering sheet.
Potential considerations include:
Straight cylindrical lever geometry
Compact neck details
Rounded lever ends
Decorative satin nickel appearance
Compatible interior door applications
The actual zinc alloy grade, construction, and production process must be confirmed.
Aluminum alloy is another material option identified for LH1051.
Its generally lower density compared with zinc alloys may be relevant where component weight is an important design consideration.
Depending on the selected alloy grade and manufacturing method, aluminum alloy can be used for modern architectural lever handle designs.
Potential considerations include:
Contemporary cylindrical handle profiles
Lightweight material selection
Smooth exterior surfaces
Satin metallic finishes
Compatible interior door applications
The actual aluminum alloy grade, manufacturing process, and finish specification must be verified.
| Feature | Zinc Alloy | Aluminum Alloy |
|---|---|---|
| Material Category | Zinc-Based Alloy | Aluminum-Based Alloy |
| General Density | Typically Higher | Typically Lower |
| Straight Lever Geometry | Process-Dependent | Process-Dependent |
| Decorative Surface Finishing | Grade and Process-Dependent | Grade and Process-Dependent |
| Component Weight | Depends on Construction | Depends on Construction |
| Mechanical Performance | Grade-Dependent | Grade-Dependent |
| Corrosion Resistance | Alloy and Finish-Dependent | Alloy and Finish-Dependent |
| LH1051 Availability | To Be Confirmed | To Be Confirmed |
Neither material should be described as universally stronger or more durable without confirming the actual alloy, product construction, coating, and performance requirements.
The supplied LH1051 engineering sheet specifies Satin Nickel as the finish.
Satin nickel provides a muted metallic appearance that is commonly associated with contemporary architectural hardware.
Its restrained visual character can complement modern wooden doors, neutral interior color palettes, and minimalist door hardware collections.
The supplied product rendering shows a softly brushed metallic lever surface with reflective highlights around the neck and mounting components.
The exact texture, color consistency, and finish process must be confirmed against an approved sample.
Potential design advantages include:
Understated metallic styling
Compatibility with contemporary interior design
A clean appearance for straight cylindrical handles
Coordination with suitable metallic architectural fittings
A neutral visual character for residential and commercial interiors
These are aesthetic considerations rather than verified coating-performance claims.
Customers may ask DEGOL whether other finishes can be supplied, such as:
Polished Chrome
Satin Chrome
Matte Black
Brushed Metallic Finishes
Decorative Gold-Tone Finishes
Other Project-Specific Colors
These are customization inquiries only. The supplied LH1051 sheet specifically identifies satin nickel and does not confirm the availability of additional finishes.
Before placing an order, confirm:
Zinc alloy or aluminum alloy selection
Exact alloy grade
Solid or hollow construction
Manufacturing process
Satin nickel finish process
Surface texture and color
Coating durability requirements
Intended installation environment
Product weight
Relevant testing requirements
Material Notice: LH1051 is presented as a zinc alloy or aluminum alloy door handle. It should not be advertised as a stainless steel product without separate confirmation.
The DEGOL LH1051 Straight Cylindrical Door Lever Handle is intended for compatible interior door applications.
The straight cylindrical grip can complement contemporary homes with clean architectural lines.
LH1051 may be considered for compatible bedroom doors when paired with an appropriate latch or privacy locking mechanism.
Its minimalist appearance can coordinate with modern living spaces.
The satin nickel finish can complement contemporary workspaces and residential study areas.
The simple round-bar design may be considered for apartment and condominium interior door hardware schedules.
LH1051 can be evaluated for compatible office doors, meeting rooms, and administrative spaces.
The design may be considered for hospitality interiors when the final product meets the required durability, security, and locking specifications.
The straight cylindrical shape offers a minimalist option for modern renovation projects.
Door manufacturers may inquire about compatibility with selected door constructions and locking systems.
LH1051 offers a straightforward cylindrical lever design for hardware importers, wholesalers, and distributors.
| Door Type | Application Consideration |
|---|---|
| Wooden Interior Doors | Subject to fixing and lock compatibility |
| MDF Interior Doors | Subject to door construction |
| Composite Interior Doors | Subject to approved installation specifications |
| Bedroom Doors | Compatible latch or privacy lock required |
| Apartment Interior Doors | Suitable for evaluation |
| Office Interior Doors | Suitable for evaluation |
| Hotel Interior Doors | Project performance requirements must be verified |
| Metal Interior Doors | Appropriate mounting preparation required |
| Commercial Interior Doors | Subject to project requirements |
| Exterior Entrance Doors | Environmental suitability not established |
| Fire-Rated Doors | Requires appropriate certification and approval |
| Frameless Glass Doors | Direct mounting compatibility not established |
| Sliding Doors | Not intended as a conventional sliding-door pull |
Before selecting LH1051, verify:
Door material
Door thickness
Lock or latch type
Spindle dimensions
Mounting arrangement
Fixing-hole locations
Lever handing
Required operating clearance
Applicable project standards
The supplied drawing does not establish a fire rating, emergency-exit certification, or suitability for any particular certified door assembly.
The following steps provide a general installation overview for lever-on-round-rose door hardware.
Actual installation must follow the approved LH1051 instructions and the selected lock manufacturer's requirements.
Check the door material, thickness, and lock mechanism.
The reference drawing specifies a door thickness range of 35–45 mm.
Check the lever handle, decorative rose, mounting components, spindle, and screws against the confirmed packing list.
The engineering sheet does not establish the contents of a complete retail or wholesale package.
Determine the required lever orientation and verify whether the supplied product is suitable for the door handing.
Mark the spindle opening and mounting positions according to approved installation instructions.
Do not use the supplied preliminary engineering sheet as a drilling template.
Install the latch or mortise lock according to the lock manufacturer's instructions.
Insert the approved square spindle through the lock follower.
The reference spindle section is 8 × 8 mm.
Confirm its actual length and engagement.
Fit the LH1051 handle to the appropriate side of the door.
Check that the straight cylindrical grip is correctly aligned.
Attach the mounting components using the approved fixing system.
The fixing-hole pitch and screw dimensions must be confirmed before installation.
Install the round decorative rose cover according to the product instructions.
Check:
Smooth lever rotation
Correct latch operation
Secure mounting
Proper horizontal alignment
Sufficient hand clearance
Correct lever return where specified
Correct locking operation where applicable
The actual mounting-hole positions, fixing screws, spindle length, handing, and lock compatibility must be confirmed before installation.
The LH1051 features a simple round-bar grip that suits contemporary architectural interiors.
The straight lever and circular mounting rose create a balanced visual combination.
The illustrated cylindrical grip has a smooth, rounded profile.
Actual ergonomic performance should be assessed using a physical sample.
The rounded tip avoids the sharp visual appearance of a square-cut bar end.
The short neck and angled transition add subtle geometric character to the design.
Zinc alloy provides one material option for customers evaluating decorative architectural hardware.
Aluminum alloy provides an alternative material option for the same general design category.
The specified satin nickel finish complements the clean cylindrical geometry.
The circular mounting rose supports a simple contemporary appearance.
The drawing identifies interior doors as the intended application.
The straightforward styling can fit modern architectural hardware product collections.
Customers may discuss material selection, branding, packaging, and possible product customization with DEGOL.
Jiangmen Degol Hardware Co., Ltd. welcomes OEM and ODM inquiries for architectural door hardware, including modern straight cylindrical lever handles such as LH1051.
Customers may submit drawings, material requirements, finish references, packaging artwork, and project specifications for evaluation.
Potential private-label requirements include:
Customer logo identification
Custom product model numbers
Product labels
Barcode stickers
Branded packaging
Customized instruction sheets
Export carton markings
Customers may inquire about:
Zinc Alloy
Aluminum Alloy
The final material depends on confirmed production availability, alloy grade, technical requirements, and commercial terms.
The supplied LH1051 drawing specifies satin nickel.
Customers may ask whether alternative finishes can be developed or supplied.
Any additional finish requires confirmation.
Potential custom design inquiries include:
Overall lever length
Projection
Cylindrical grip diameter
Neck length
Neck height
Lever-end radius
Rose diameter
Rose thickness
Mounting configuration
Design changes may require revised technical drawings, tooling, and sample approval.
Customers may inquire about rose dimensions, decorative profiles, and fixing arrangements.
Project requirements may include different spindle lengths or specific lock configurations.
Technical feasibility must be confirmed.
Potential packaging options include:
Private-label product boxes
Protective internal packaging
Branded labels
Barcode identification
Customized installation instructions
Export carton markings
Customers may submit door schedules, architectural drawings, material requirements, and estimated order quantities.
Where available, physical samples may be requested to confirm dimensions, finish, material, and installation compatibility.
OEM / ODM Notice: All customization options are subject to technical feasibility, tooling requirements, MOQ, sample approval, and agreed commercial terms.
| Item | Information |
|---|---|
| Product Model | LH1051 |
| Brand | DEGOL |
| Product Name | Straight Cylindrical Door Lever Handle on Round Rose |
| Material Options | Zinc Alloy or Aluminum Alloy |
| Final Material | To Be Confirmed |
| Specified Finish | Satin Nickel |
| Other Finish Options | Subject to Inquiry |
| Lever Quantity | To Be Confirmed |
| Round Rose | Illustrated; Package Quantity TBC |
| Fixing Base | Illustrated; Final Supply TBC |
| Square Spindle | 8 × 8 mm Reference |
| Keyhole Escutcheons | Not Illustrated |
| Mortise Lock Body | Not Confirmed as Included |
| Lock Cylinder | Not Confirmed as Included |
| MOQ | Subject to Quotation |
| Sample Availability | On Request |
| OEM Packaging | Subject to Confirmation |
| Production Lead Time | Subject to Order Confirmation |
| Payment Terms | To Be Negotiated |
| Shipping Terms | Subject to Quotation |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Step 1 – Send Your Inquiry
Provide model LH1051, required quantity, preferred material, and destination country.
Step 2 – Confirm the Material
Specify whether the requested configuration should use zinc alloy or aluminum alloy.
Step 3 – Verify the Finish
Confirm the satin nickel appearance and any special surface finish requirements.
Step 4 – Confirm Technical Specifications
Request approved dimensions, mounting details, spindle specifications, and lock compatibility information.
Step 5 – Request Samples
Contact DEGOL regarding sample availability, pricing, and shipping arrangements.
Step 6 – Confirm OEM / ODM Requirements
Submit branding, packaging, or custom drawing requirements where applicable.
Step 7 – Review the Quotation
Confirm unit pricing, MOQ, lead time, payment terms, and shipping arrangements.
Step 8 – Approve the Final Configuration
Review the approved product specifications and sample where required.
Step 9 – Arrange Production and Delivery
Production and shipment follow the confirmed purchase order and agreed commercial terms.
Product Model: LH1051
Required Quantity
Zinc Alloy or Aluminum Alloy
Satin Nickel Finish Requirements
Door Thickness
Lock and Spindle Requirements
Required Package Contents
OEM / ODM Requirements
Packaging Preferences
Destination Country
Required Delivery Schedule
Jiangmen Degol Hardware Co., Ltd. is a China-based hardware manufacturer and export supplier serving international customers with door hardware and related architectural fittings.
DEGOL welcomes wholesale and OEM / ODM inquiries from architectural hardware distributors, importers, door manufacturers, contractors, and professional buyers.
Customers may inquire about:
Zinc alloy door handles
Aluminum alloy door handles
Straight cylindrical lever handles
Round rose door handles
Modern interior door handles
Decorative lever handle designs
Door escutcheons
Door locks and mortise lock bodies
Door hinges
Related architectural door accessories
Specific product availability must be confirmed.
DEGOL welcomes inquiries involving customer drawings, reference samples, material requirements, and project specifications.
Custom product development is subject to technical evaluation.
For LH1051, customers may inquire about zinc alloy and aluminum alloy configurations.
The actual alloy grade, construction, and manufacturing method must be confirmed.
The supplied LH1051 product sheet identifies satin nickel as the finish.
Customers may discuss specific color, texture, and finish-performance requirements.
The engineering sheet illustrates a cylindrical lever, round decorative rose, fixing base, and square spindle connection.
The complete commercial package configuration must be confirmed.
Buyers may request information about inspection procedures covering:
Product dimensions
Surface appearance
Lever alignment
Mounting fit
Spindle compatibility
Lever operation
Finish requirements
Packaging condition
LH1051-specific test reports, certifications, and performance ratings must be verified separately.
International customers may submit requests involving:
Material selection
Lever geometry changes
Surface finishes
Private-label branding
Customized packaging
Project-specific hardware configurations
DEGOL welcomes inquiries from:
Architectural hardware importers
Door handle wholesalers
Regional hardware distributors
Door manufacturers
Building material suppliers
Construction contractors
Hotel project buyers
International hardware brands
OEM / ODM customers
For LH1051, customers may request:
Approved technical drawings
Verified product dimensions
Material specifications
Satin nickel finish details
Rose dimensions
Fixing-base details
Spindle specifications
Lock compatibility information
Sample information
Packaging specifications
Wholesale quotations
Factory Capability Notice: General company capabilities do not establish the availability, certification, production capacity, or exact manufacturing process of a particular LH1051 configuration. Model-specific details require confirmation.
The DEGOL LH1051 is a modern straight cylindrical door lever handle featuring a round mounting rose and satin nickel finish.
The engineering sheet identifies zinc alloy or aluminum alloy as the material options.
Zinc alloy is listed as a material option. Actual production availability and alloy grade should be confirmed with DEGOL.
Aluminum alloy is also listed as a material option. The exact configuration requires confirmation.
The supplied product sheet specifies zinc alloy or aluminum alloy, not stainless steel.
Zinc alloys generally have higher density than aluminum alloys. Mechanical properties, corrosion resistance, and finishing characteristics depend on the specific alloy and manufacturing process.
The appropriate choice depends on the required weight, mechanical performance, finish, budget, and intended application.
LH1051 has a modern minimalist design with a straight cylindrical lever and circular mounting rose.
Yes. The main gripping section is illustrated as a straight cylindrical bar.
The reference lever diameter is Ø19 mm.
The engineering sheet specifies an overall length of 128 mm.
The key dimensions table specifies a projection of 64 mm.
The reference neck length is 18 mm.
The reference neck height is 16 mm.
The drawing identifies a reference lever-end radius of R9.
Yes. The drawing shows a smoothly rounded outer end.
Yes. The product is illustrated with a circular mounting rose.
The key dimensions table specifies Ø52 mm.
A separate 54 mm dimension appears in the side elevation. Its relationship to the Ø52 mm rose specification requires clarification.
The reference rose thickness is 10 mm.
The rear fixing-base view specifies Ø38 mm.
The drawing identifies an 8 × 8 mm square spindle connection.
The spindle length has not been confirmed.
The supplied product sheet specifies a reference door thickness range of 35–45 mm.
Yes. Interior doors are identified as the intended application in the supplied engineering sheet.
It may be considered for compatible wooden interior doors when the mounting system and lock mechanism are suitable.
Metal door compatibility depends on the actual door construction, fixing method, and lock configuration.
LH1051 may be considered for compatible office interior doors.
The design can be evaluated for hospitality interiors, subject to the required security, durability, and locking specifications.
Exterior suitability has not been confirmed. Material, finish, corrosion resistance, and environmental exposure requirements should be reviewed.
No LH1051 fire-rating documentation has been provided.
The supplied engineering sheet specifies satin nickel.
Customers may inquire about alternative finishes, but polished chrome is not confirmed as a standard LH1051 finish.
Customers may ask DEGOL whether a matte black version is available or can be customized.
The supplied drawing does not illustrate keyhole escutcheons. Their availability or inclusion must be confirmed.
The supplied engineering sheet does not establish that a mortise lock body is included.
Only one handle is illustrated. The standard package quantity must be confirmed.
The drawing does not confirm reversibility or handing requirements.
The supplied engineering sheet does not verify an internal return spring.
The drawing does not provide a verified mounting-hole pitch. Buyers should request approved fixing dimensions.
DEGOL welcomes OEM / ODM inquiries involving material selection, finishes, branding, packaging, and possible design modifications.
Customers may inquire about private-label branding and customized packaging.
Customers may contact DEGOL to inquire about sample availability, pricing, and shipping arrangements.
The confirmed MOQ has not been provided. It should be requested according to the required material, finish, and packaging configuration.
LH1051 features a straight cylindrical round-bar grip with a short angled neck.
LH1117 features a curved connecting neck and a fuller tapered oval grip.
These are visually distinct architectural hardware designs.
DEGOL welcomes wholesale inquiries from architectural hardware importers, distributors, door manufacturers, and professional buyers.
Buyers may request verified dimensions and approved technical documentation from DEGOL.
Customers may submit OEM / ODM requirements for technical and commercial evaluation.
Contact DEGOL via WhatsApp or email with the model number, preferred material, order quantity, finish requirements, and destination country.
Provide model LH1051, quantity, zinc alloy or aluminum alloy preference, satin nickel finish requirements, door thickness, lock compatibility requirements, packaging preferences, and destination country.
Looking for a modern straight cylindrical door lever handle with a satin nickel finish, zinc alloy or aluminum alloy material options, and a coordinated round mounting rose?
Contact DEGOL Hardware for verified technical specifications, material information, approved drawings, sample availability, OEM / ODM options, packaging details, and wholesale pricing.
Product Model: LH1051
Product Name: DEGOL LH1051 Modern Straight Cylindrical Zinc Alloy or Aluminum Alloy Door Lever Handle on Round Rose – Satin Nickel
Material Options: Zinc Alloy or Aluminum Alloy
Finish: Satin Nickel
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your LH1051 Satin Nickel Straight Cylindrical Door Lever Handle Wholesale Quote Today.
