 |
LH1103
Degol
| Quantity: | |
|---|---|
The DEGOL LH1103 Wave-Shaped Stainless Steel Door Lever Handle is a contemporary architectural door hardware design featuring a flowing curved lever, a circular mounting rose, and a brushed satin stainless steel appearance.
Its defining characteristic is a sculpted, wave-like lever profile that flows smoothly from the mounting stem toward a broader, softly rounded tip. Unlike traditional straight tubular door handles or angular rectangular levers, the LH1103 combines gentle curves, changing lever width, and a distinctive S-shaped silhouette.
The result is a decorative yet understated door handle design suitable for modern interior hardware collections.
The supplied reference drawing indicates an approximate lever length of 125–130 mm, a projection of 60 mm, and a maximum handle width of 22 mm.
The lever is mounted on a round rose with an approximate diameter of 52 mm and a thickness of 10 mm.
A coordinated circular Euro-profile keyhole escutcheon is also illustrated, featuring an approximate opening of 17 × 33 mm.
The satin brushed metallic appearance gives the LH1103 a versatile contemporary style suitable for consideration in residential apartments, private homes, office interiors, hotels, and compatible commercial interior door projects.
Jiangmen Degol Hardware Co., Ltd. welcomes inquiries from architectural hardware wholesalers, international importers, door manufacturers, building material distributors, construction buyers, and OEM/ODM customers.
The reference drawing identifies stainless steel as the material, but the exact grade and final manufacturing specifications remain unverified.
The LH1103 Wave-Shaped Door Lever Handle is a sculpted curved lever handle designed for mounting on a round rose.
Its flowing geometry creates a distinctive appearance compared with standard straight, cylindrical, rectangular, or sharply angled door lever designs.
1. Wave-Shaped Lever Profile
The handle follows a smooth flowing curve from the mounting stem toward the outer end.
2. Sculpted Curved Grip
The gripping section changes gradually in width and contour, creating a visually soft and organic profile.
3. Broad Rounded Lever Tip
The outer end is gently widened and rounded rather than sharply squared off.
4. Round Mounting Rose
The approximately 52 mm circular rose provides a simple architectural base.
5. Satin Stainless Steel Appearance
The reference illustration features a brushed silver metallic finish.
6. Matching Euro-Profile Escutcheon
The illustrated set includes coordinated round escutcheons with Euro-profile keyhole openings.
7. Contemporary Interior Styling
The wave-inspired form makes LH1103 a suitable design option for modern and decorative interior hardware ranges.
| Parameter | Specification |
|---|---|
| Product Model | LH1103 |
| Brand | DEGOL |
| Product Name | Wave-Shaped Stainless Steel Door Lever Handle |
| Product Type | Curved Lever Handle on Round Rose |
| Product Category | Architectural Door Hardware |
| Handle Design | Flowing Wave / Sculpted Curved Lever |
| Lever Shape | S-Curve with Rounded Widened Tip |
| Design Style | Modern / Contemporary / Organic |
| Reference Material | Stainless Steel |
| Material Grade | Not Verified |
| Reference Finish | Satin Stainless Steel / Brushed |
| Handle Length | Approx. 125–130 mm |
| Handle Projection | Approx. 60 mm |
| Maximum Handle Width | Approx. 22 mm |
| Rose Shape | Round |
| Rose Diameter | Approx. Ø52 mm |
| Rose Thickness | Approx. 10 mm |
| Escutcheon Shape | Round |
| Escutcheon Type | Euro Profile |
| Escutcheon Diameter | Approx. Ø52 mm |
| Escutcheon Thickness | Approx. 10 mm |
| Keyhole Opening | Approx. 17 × 33 mm |
| Square Spindle | Approx. 8 × 8 mm |
| Applicable Door Thickness | Approx. 35–55 mm |
| Reference Fixing Method | Screw Fixing Through Rose |
| Handle Orientation | Opposing Assemblies Illustrated |
| Reversibility | Not Verified |
| Spring Mechanism | Not Specified |
| Lock Compatibility | Subject to Selected Euro-Profile Lock System |
| Intended Applications | Compatible Interior Doors |
| OEM / ODM | Subject to Technical and Commercial Confirmation |
| Supplier | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Specification Notice: The dimensions are approximate reference measurements. The actual stainless steel grade, mechanical construction, mounting details, package contents, and final dimensions must be verified before manufacturing, procurement, or installation.
The LH1103 technical illustration includes front, top, side, bottom, and isometric views, along with detailed round rose drawings, Euro-profile escutcheon details, and an exploded assembly view.
The reference drawing indicates a lever length of approximately 125–130 mm.
The handle's flowing shape creates a curved silhouette with a gently widened outer gripping area.
The side view indicates an approximate projection of 60 mm.
Final installed projection and required clearance should be checked against the official LH1103 technical drawing.
The reference drawing identifies a maximum handle width of approximately 22 mm.
Because the lever is sculpted and varies in width, this measurement should not be interpreted as a constant circular diameter.
The circular mounting rose has a reference diameter of approximately 52 mm.
Its simple round geometry balances the flowing curved lever.
The reference rose thickness is approximately 10 mm.
The actual mounting depth depends on the final rose assembly and fixing arrangement.
The illustrated matching escutcheon has a diameter of approximately 52 mm and a thickness of approximately 10 mm.
Its round shape coordinates with the lever rose.
The illustrated escutcheon features a Euro-profile keyhole opening with approximate dimensions of:
Width: 17 mm
Height: 33 mm
These are reference dimensions. Compatibility with the selected Euro-profile cylinder and lock must be confirmed.
The reference exploded drawing shows an approximately 8 × 8 mm square spindle.
The required spindle length depends on the door thickness and lock arrangement.
The reference drawing identifies a suitable door thickness range of approximately 35–55 mm.
Final compatibility depends on the lock body, spindle length, mounting screws, and door construction.
The illustration depicts:
Wave-shaped lever handle assemblies
Round rose covers
Internal fixing plates
Square spindle
Mounting screws
Matching round Euro-profile escutcheons
The illustration does not establish the final commercial packing list.
Opposing lever assemblies are shown.
However, the drawing does not establish whether the product is universally reversible or requires a specific handing configuration.
Customers may request official LH1103 technical drawings, confirmed material grades, rose dimensions, spindle requirements, lock compatibility, fixing details, and installation instructions.
The supplied LH1103 drawing identifies stainless steel as the reference material.
The actual stainless steel grade has not been verified.
Stainless steel is widely used in architectural door hardware for its metallic appearance and corrosion resistance when an appropriate grade is selected for the application.
The exact grade should be confirmed before ordering.
SUS304 is a common material option in architectural hardware.
Customers requiring SUS304 may ask DEGOL whether this material can be supplied for LH1103.
SUS304 is not established as the confirmed material by the reference drawing.
The LH1103 reference image features a satin brushed metallic finish.
This understated silver appearance coordinates with modern interior design schemes and other satin-finished door hardware.
Customers may inquire about the feasibility of alternative decorative finishes, including polished stainless steel, matte black, or customized colors.
Alternative finishes are subject to confirmation and should not be considered standard options without verification.
For a confirmed satin stainless steel finish, routine cleaning can generally be performed using a soft cloth and a suitable mild cleaner.
Avoid abrasive cleaning materials and unsuitable chemical treatments.
The DEGOL LH1103 can be considered for contemporary interior door hardware projects where a decorative flowing lever design is preferred.
Modern apartments
Private homes
Residential villas
Bedroom doors
Study room doors
Home office doors
Interior renovation projects
Office rooms
Meeting rooms
Administrative interiors
Business centers
Commercial interior doors
Interior fit-out projects
Hotel interior doors
Serviced apartments
Guest accommodation interiors
Hospitality renovation projects
The LH1103 is relevant to buyers seeking modern wave-shaped door handles for architectural hardware collections, wholesale distribution, or private-label product ranges.
Final suitability must be evaluated against the selected lock, door construction, mechanical requirements, and installation conditions.
The LH1103 may be used with compatible interior doors where the hardware specifications and mounting system match the door and lock requirements.
| Door Type | Potential Application |
|---|---|
| Wooden Interior Doors | Compatible residential installations |
| MDF Interior Doors | Subject to appropriate fixings |
| Composite Interior Doors | Subject to hardware compatibility |
| Apartment Interior Doors | Modern residential projects |
| Bedroom Doors | Compatible latch and lock systems |
| Office Interior Doors | Commercial interior applications |
| Hotel Interior Doors | Subject to project specifications |
| Decorative Interior Doors | Contemporary interiors |
Before installation, verify:
Door thickness
Lock case dimensions
Euro-profile cylinder requirements
Square spindle size
Spindle length
Rose fixing positions
Lever handing
Required handle clearance
Supplied accessories
The reference drawing does not establish fire-door certification, emergency-exit compliance, accessibility approval, or suitability for exposed exterior applications.
The following steps provide a general installation overview. Always follow the final manufacturer-approved LH1103 installation drawing and the selected lock manufacturer's instructions.
Check the door thickness, lock system, spindle dimensions, and required mounting positions.
Check the supplied lever assemblies, round roses, spindle, fixing plates, screws, and escutcheons against the confirmed packing list.
Mark the mounting positions using an official drilling template.
Do not drill solely from the approximate reference illustration.
Install the selected compatible mortise lock or latch according to its manufacturer's instructions.
Insert the correctly sized square spindle through the lock follower.
The reference spindle section is approximately 8 × 8 mm.
Position the lever assemblies on the door and align them with the spindle.
Check the orientation of the wave-shaped gripping sections.
Install the fixing plates and tighten the mounting screws according to the specified method.
Fit the decorative rose covers.
Where included, install the matching escutcheons in the correct position relative to the selected cylinder and lock.
Check that:
The lever moves smoothly
The latch retracts correctly
The lever returns as intended
The mounting screws remain secure
The roses sit correctly against the door
The cylinder and lock operate without obstruction
Verify alignment, operating clearance, hardware security, and the finished appearance.
Professional installation is advisable for specialized commercial lock systems.
The flowing S-curve creates a recognizable architectural appearance that differentiates LH1103 from conventional straight door handles.
The lever's changing contours and rounded tip create a soft, contemporary visual character.
The brushed metallic finish coordinates with modern interior hardware collections.
The approximately 52 mm circular rose provides a simple, balanced mounting appearance.
The illustrated escutcheons coordinate visually with the handle roses.
The LH1103 can be considered for residential, commercial, and hospitality interior applications.
The wave-shaped silhouette helps distinguish LH1103 from straight, tubular, rectangular, and angular tapered lever designs.
The reference drawing provides dimensions for initial product assessment and quotation discussions.
The product is relevant to architectural hardware importers, distributors, and bulk procurement buyers.
Customers can discuss private-label branding, packaging, finishes, and technically feasible product modifications.
Jiangmen Degol Hardware Co., Ltd. welcomes OEM and ODM inquiries for the LH1103 Wave-Shaped Door Lever Handle.
Customers may discuss:
Customized product identification
Private-label packaging
Brand labels
Customer-specific product codes
Export carton markings
Project-specific finish requests may be evaluated according to the selected material and manufacturing feasibility.
Potential customization requests include:
Lever length
Curved lever profile
Handle projection
Round rose diameter
Escutcheon configuration
Spindle requirements
Mounting arrangement
Structural modifications require technical review and may involve tooling or additional development costs.
Customers may inquire about branded individual boxes, labels, protective packaging, and export carton specifications.
DEGOL welcomes inquiries for bulk door hardware orders, architectural projects, samples, and private-label product collections.
Customization availability, MOQ, tooling charges, and lead times must be confirmed for each order.
| Item | Information |
|---|---|
| Product Model | LH1103 |
| Product Name | Wave-Shaped Stainless Steel Door Lever Handle on Round Rose |
| Brand | DEGOL |
| Reference Material | Stainless Steel – Grade Unverified |
| Reference Finish | Satin Stainless Steel / Brushed |
| Handle Pair | Illustrated; Inclusion to Be Confirmed |
| Round Roses | Illustrated; Inclusion to Be Confirmed |
| Euro-Profile Escutcheons | Illustrated; Inclusion to Be Confirmed |
| Square Spindle | Reference 8 × 8 mm; Final Length Unconfirmed |
| Fixing Screws | Final Packing List to Be Confirmed |
| Standard Packaging | To Be Confirmed |
| Customized Packaging | Subject to Inquiry |
| MOQ | Contact DEGOL |
| Sample Availability | Upon Inquiry |
| Sample Lead Time | To Be Confirmed |
| Production Lead Time | To Be Confirmed |
| Wholesale Pricing | Quotation Upon Request |
| Shipping Terms | To Be Agreed |
Step 1 – Submit an Inquiry
Provide model LH1103, preferred material, finish, estimated quantity, and destination market.
Step 2 – Confirm Specifications
Review the official drawing, material grade, dimensions, spindle, lock compatibility, and included accessories.
Step 3 – Request Samples
Discuss sample availability, costs, and shipping arrangements.
Step 4 – Review Wholesale Pricing
Confirm unit prices, MOQ, packaging, lead time, and trading terms.
Step 5 – Approve the Order
Finalize the product configuration and purchase order.
Step 6 – Arrange Production and Delivery
Production and delivery follow the agreed commercial conditions.
Jiangmen Degol Hardware Co., Ltd. supplies architectural door hardware products for international wholesale and B2B sourcing inquiries.
The LH1103 Wave-Shaped Door Lever Handle is positioned within DEGOL's modern interior door hardware collection.
Customers may inquire about:
Wave-shaped door lever handles
Sculpted curved door handles
Satin stainless steel appearance door hardware
Lever handles on round roses
Euro-profile escutcheons
Residential interior door hardware
Commercial interior door hardware
OEM and private-label hardware products
DEGOL welcomes inquiries from:
Architectural hardware wholesalers
International importers
Door hardware distributors
Building material suppliers
Door manufacturers
Construction procurement teams
Hardware brands
Interior project buyers
Customers may request:
LH1103 technical drawings
Confirmed material specifications
Product dimensions
Finish information
Sample arrangements
Packaging details
OEM/ODM consultation
Wholesale quotations
Specific factory capacity, machinery, manufacturing processes, testing results, and certifications should be verified before being published as established facts.
Company: Jiangmen Degol Hardware Co., Ltd.
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
WhatsApp: +86 13725946499
The DEGOL LH1103 is a modern wave-shaped door lever handle with a sculpted curved grip and round mounting rose.
The LH1103 features a flowing curved lever with a rounded, widened tip instead of a straight tubular or rectangular grip.
Yes. The reference illustration clearly shows a smooth wave-like lever profile.
The reference drawing identifies stainless steel, but the exact grade has not been verified.
SUS304 has not been confirmed. Buyers should request the official material specification.
The reference illustration shows a brushed satin stainless steel appearance.
The reference handle length is approximately 125–130 mm.
The reference projection is approximately 60 mm.
The reference maximum width is approximately 22 mm.
LH1103 features a round mounting rose.
The reference rose diameter is approximately 52 mm.
The reference rose thickness is approximately 10 mm.
Matching round Euro-profile escutcheons are illustrated. Their inclusion in the final quoted set must be confirmed.
The reference escutcheon diameter is approximately 52 mm.
The reference escutcheon thickness is approximately 10 mm.
The reference opening measures approximately 17 × 33 mm.
The illustrated escutcheon has a Euro-profile opening, but compatibility with the selected cylinder and lock must be confirmed.
The reference drawing indicates an approximately 8 × 8 mm square spindle.
The reference drawing indicates approximately 35–55 mm, subject to final installation compatibility.
It may be suitable for compatible wooden interior doors with the appropriate mounting and locking system.
The modern curved design can be considered for office interior door applications, subject to technical requirements.
It may be considered for compatible hotel interior door projects, provided the relevant specifications are met.
Exterior suitability has not been established. The material grade, finish performance, and exposure conditions must be evaluated.
No fire-rating documentation has been provided. Suitability for a fire-rated door requires verification of the complete door assembly.
A pair is illustrated, but the final packing list must confirm the supplied components.
Opposing handles are shown, but universal reversibility has not been verified.
The reference drawing does not establish the presence or performance of a spring-return mechanism.
Customers may discuss private-label branding and customized packaging requirements with DEGOL.
Contact DEGOL to inquire about sample availability, charges, and shipping arrangements.
MOQ depends on the final product configuration and order requirements. Please contact DEGOL for confirmation.
Customers may request an official LH1103 drawing and confirmed product specifications.
Contact DEGOL by WhatsApp or email with model LH1103, estimated quantity, material requirements, preferred finish, packaging details, and destination market.
Looking for an LH1103 Wave-Shaped Stainless Steel Door Lever Handle on Round Rose for your architectural hardware range?
Contact DEGOL Hardware for confirmed product specifications, technical drawings, material grades, available finishes, sample information, OEM/ODM requirements, and wholesale quotations.
Product Model: LH1103
Product Name: Wave-Shaped Stainless Steel Door Lever Handle on Round Rose
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your LH1103 Wave-Shaped Door Lever Handle Wholesale Quote Today
