 |
LH1118
Degol
| Quantity: | |
|---|---|
The DEGOL LH1118 Modern Flat Oval Bar Door Lever Handle on Round Rose is a contemporary architectural door hardware design featuring a straight flattened round-bar grip, a smoothly curved connecting neck, and a coordinated circular mounting rose.
Designed for modern interior door applications, the LH1118 combines the visual simplicity of a straight lever with the refined proportions of a flat oval gripping section.
Unlike conventional cylindrical door handles, the LH1118 has a flattened oval cross-section measuring approximately 22 mm wide and 12 mm thick in the supplied reference drawing.
This oblate grip profile creates a distinctive appearance: the handle looks broad and substantial from the front while appearing slimmer from the side.
The lever extends horizontally from a curved connecting neck, producing a clean architectural silhouette with a smooth transition between the round mounting rose and the straight gripping section.
The outer end of the lever is softly rounded, complementing the flattened oval geometry.
The LH1118 is presented with zinc alloy or aluminum alloy material options, allowing wholesale buyers to inquire about the material configuration most appropriate for their project.
The supplied reference drawing illustrates a satin silver metallic appearance with reflective highlights at the neck and lever ends.
Typical finish categories identified in the drawing include satin nickel, polished chrome, matte black, satin aluminum, and custom finishes.
The exact availability of each material and finish combination must be confirmed before ordering.
According to the reference dimension sheet, the LH1118 has a handle length of approximately 126 mm, a projection of approximately 60 mm, and a round mounting rose approximately 53 mm in diameter and 9 mm thick.
The drawing also illustrates a concealed-fixing mounting arrangement, two approximately Ø4.5 mm mounting holes, a reference fixing-hole spacing of 38 mm, and a typical 8 mm square spindle.
A 100 mm spindle length is illustrated as a standard reference, with 7 mm and 9 mm square spindle alternatives mentioned as possible options.
The reference door thickness range is 35–55 mm.
With its clean straight-bar profile, flat oval grip, and compact round rose, the LH1118 can complement modern residential interiors, apartment developments, office spaces, hotel interiors, and other compatible architectural door hardware applications.
Jiangmen Degol Hardware Co., Ltd. welcomes wholesale and OEM / ODM inquiries from door handle importers, architectural hardware distributors, building material suppliers, door manufacturers, contractors, and international hardware brands.
Modern flat oval bar door lever handle design
Straight horizontal gripping section
Flattened round-bar cross-section
Smooth curved connecting neck
Softly rounded outer lever end
Zinc alloy or aluminum alloy material options
Approx. 126 mm reference handle length
Approx. 60 mm reference projection
Approx. 22 mm reference handle width
Approx. 12 mm reference handle thickness
Approx. Ø53 mm round mounting rose
Approx. 9 mm rose thickness
Concealed-fixing mounting concept
Approx. 38 mm reference mounting-hole spacing
Two approximately Ø4.5 mm fixing holes
Typical 8 × 8 mm square spindle
Approx. 100 mm reference spindle length
Reference door thickness of 35–55 mm
Satin nickel, chrome, black, and custom finish inquiries
Suitable for compatible interior wooden and metal doors
Wholesale and OEM / ODM inquiries welcomed
Technical Notice: The supplied LH1118 engineering sheet states that its dimensions are typical market-reference values for this design style and may be customized. These measurements are not independently verified LH1118 production specifications. Buyers should request approved technical drawings, material confirmation, and sample approval before manufacturing, drilling, installation, or bulk ordering.
The DEGOL LH1118 is a modern lever-on-round-rose door handle design characterized by a straight flattened oval grip and a curved connecting neck.
The lever is intended to operate a compatible latch or lock mechanism through a square spindle connection.
Its defining design feature is the flat oval gripping section, which differs from both conventional round tubular handles and sharply rectangular flat-bar handles.
The grip has a broad, rounded front face and a relatively slim side profile.
This creates a balanced modern appearance without the sharp corners of a fully rectangular lever.
1. Straight Flat Oval Grip
The main gripping section extends horizontally from the connecting neck.
Its flattened oval cross-section is a defining feature of the LH1118.
2. Approximately 22 mm Grip Width
The reference drawing specifies a handle width of 22 mm.
This creates a broader front-facing profile than a conventional slim cylindrical lever.
3. Approximately 12 mm Grip Thickness
The reference thickness is 12 mm.
The flattened profile produces a relatively slim side appearance.
4. Rounded Grip Edges
The illustrated cross-section has smoothly rounded edges rather than sharp rectangular corners.
5. Curved Connecting Neck
The lever is connected to the mounting rose through a smoothly curved neck.
The curve transitions into the straight gripping section.
6. Rounded Outer End
The outer end is gently rounded, continuing the smooth flat oval geometry.
7. Round Mounting Rose
The reference drawing illustrates a circular decorative mounting rose approximately 53 mm in diameter.
8. Concealed Fixing
The reference product features identify concealed screw fixing.
The actual mounting components and installation method must be confirmed.
9. Zinc Alloy or Aluminum Alloy Material Options
The reference drawing identifies zinc alloy or aluminum alloy as the material categories.
10. Decorative Surface Finish Options
The reference sheet lists satin nickel, polished chrome, matte black, satin aluminum, and custom finish inquiries.
The reference drawing shows:
One flat oval bar lever handle
One curved connecting neck
One circular decorative mounting rose
A rear mounting arrangement
Two fixing-hole positions
A square spindle illustration
The drawing does not establish the contents of a complete retail or wholesale package.
A second lever, matching keyhole escutcheons, mortise lock body, cylinder, fixing screws, or other accessories should not be assumed to be included without confirmation.
| Parameter | Specification |
|---|---|
| Brand | DEGOL |
| Model Number | LH1118 |
| Product Name | Flat Oval Bar Door Lever Handle on Round Rose |
| Product Category | Architectural Door Hardware |
| Product Type | Lever Door Handle on Round Rose |
| Design Style | Modern / Minimalist / Contemporary |
| Lever Shape | Straight Flattened Round Bar |
| Grip Cross-Section | Flat Oval / Oblate |
| Connecting Neck | Smooth Curved Neck |
| Lever End | Rounded |
| Material Option 1 | Zinc Alloy |
| Material Option 2 | Aluminum Alloy |
| Construction | Solid or Hollow |
| Illustrated Appearance | Satin Silver Metallic |
| Typical Finish Options | Satin Nickel / Polished Chrome / Matte Black / Satin Aluminum / Custom |
| Handle Length | 126 mm |
| Handle Width | 22 mm |
| Handle Thickness | 12 mm |
| Projection | 60 mm |
| Rose Shape | Round |
| Rose Diameter | Ø53 mm |
| Rose Thickness | 9 mm |
| Mounting Type | Concealed Fixing |
| Mounting-Hole Quantity | 2 – Reference |
| Mounting-Hole Diameter | Ø4.5 mm |
| Mounting-Hole Spacing | 38 mm |
| Standard Reference Spindle | 8 × 8 mm Square |
| Reference Spindle Length | 100 mm |
| Optional Spindle Sizes | 7 mm / 9 mm – Subject to Confirmation |
| Door Thickness | 35–55 mm – Reference |
| Suitable Door Materials | Compatible Wooden / Metal Interior Doors |
| Return Spring | Not Specified |
| General Dimensional Tolerances | Reference Table Only |
| OEM / ODM | Available for Inquiry |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Specification Disclaimer: All dimensions and tolerance values originate from a market-reference engineering drawing for this handle style. They must be confirmed before being used as production specifications.
The supplied LH1118 engineering reference sheet illustrates the handle through several views.
These include:
Product rendering
Front view
Top view
Side view
Handle cross-section A–A
Round rose front view
Rear mounting detail
Square spindle detail
Main dimensions table
Reference dimensional tolerance table
All dimensions are presented in millimeters.
The reference drawing identifies a handle length of 126 mm.
This measurement is useful for preliminary design comparison and architectural hardware selection.
The exact measurement datum must be confirmed in an approved technical drawing.
The front view and cross-section identify a nominal handle width of 22 mm.
This dimension gives the lever a broad front-facing profile.
The reference cross-section indicates a thickness of 12 mm.
The difference between the 22 mm width and 12 mm thickness creates the distinctive flattened oval geometry.
The section A–A illustration shows a rounded, oblate gripping profile.
This is one of the most important design characteristics of LH1118.
The grip is not a circular tube and does not have the sharp edges of a rectangular bar.
The reference drawing specifies a projection of 60 mm.
This dimension is relevant when assessing installed handle clearance.
The exact measurement points must be verified before architectural specification or installation.
The top and side views show a curved connecting neck between the mounting rose and the straight grip.
The drawing does not specify the exact neck curvature radius.
The outer end has a rounded profile that follows the flattened oval shape.
No specific end radius is provided.
The round mounting rose has a reference diameter of 53 mm.
This creates a clean circular base for the horizontal lever.
The reference rose thickness is 9 mm.
The actual installed thickness depends on the confirmed cover and mounting arrangement.
The reference product features identify concealed screw fixing.
The illustrated mounting concept includes a rear fixing arrangement.
The exact mounting plate, screw specification, and assembly sequence require confirmation.
The rear mounting illustration indicates a reference spacing of 38 mm between the two mounting-hole positions.
This value must be verified before preparing installation holes.
The reference drawing identifies two approximately 4.5 mm mounting holes.
The actual fixing method may depend on the door material and installation requirements.
The reference spindle is shown as an 8 mm square section.
The spindle must be compatible with the selected latch or mortise lock.
The spindle detail illustrates a typical length of 100 mm.
The actual supplied spindle length must be confirmed.
The reference product features mention optional 7 mm and 9 mm square spindle sizes.
These should be treated as potential customization inquiries, not confirmed standard LH1118 configurations.
The reference drawing indicates a suitable door thickness range of 35–55 mm.
Actual compatibility depends on the mounting system, spindle length, and selected locking mechanism.
The supplied engineering sheet includes the following reference tolerance table:
| Dimension Range | Reference Tolerance |
|---|---|
| Up to 30 mm | ±0.2 mm |
| Over 30 mm to 100 mm | ±0.3 mm |
| Over 100 mm | ±0.5 mm |
These values are typical drawing references only and are not verified LH1118 manufacturing acceptance criteria.
| Component | Reference Dimension |
|---|---|
| Handle Length | 126 mm |
| Handle Width | 22 mm |
| Handle Thickness | 12 mm |
| Handle Cross-Section | 22 × 12 mm |
| Projection | 60 mm |
| Rose Diameter | Ø53 mm |
| Rose Thickness | 9 mm |
| Mounting-Hole Spacing | 38 mm |
| Mounting-Hole Diameter | 2 × Ø4.5 mm |
| Standard Spindle Section | 8 × 8 mm |
| Reference Spindle Length | 100 mm |
| Optional Spindle Sections | 7 mm / 9 mm – Verify |
| Suitable Door Thickness | 35–55 mm |
Technical Drawing Notice: The drawing is based on typical market dimensions for this handle style. It should not be used directly for manufacturing, drilling, tooling, or quality inspection without approval.
Zinc alloy is a common material category for decorative architectural door hardware.
Depending on the alloy grade and production process, zinc alloy may be used to manufacture lever handles with rounded contours, defined geometric transitions, and decorative finishes.
For LH1118, zinc alloy is one of the material options identified in the reference drawing.
Potential considerations include:
Flat oval gripping geometry
Smooth curved connecting neck
Rounded lever ends
Decorative surface finishes
Interior architectural hardware applications
The reference notes mention Zamak as an example of a zinc alloy category.
However, the exact LH1118 zinc alloy grade, construction, and manufacturing process have not been verified.
Aluminum alloy is another material option identified for LH1118.
Aluminum alloys generally have lower density than zinc alloys, which may be relevant when product weight is an important consideration.
Depending on the selected grade and production process, aluminum alloy can be used for contemporary architectural hardware with smooth rounded profiles.
The reference drawing mentions 6063 and 6061 as examples of aluminum alloy grades.
These are examples only and should not be represented as confirmed LH1118 production materials.
Potential considerations include:
Modern flat oval lever geometry
Lower-density material selection
Smooth metallic surface appearance
Decorative finish requirements
Compatible interior door applications
| Feature | Zinc Alloy | Aluminum Alloy |
|---|---|---|
| Material Category | Zinc-Based Alloy | Aluminum-Based Alloy |
| General Density | Typically Higher | Typically Lower |
| Flat Oval Grip Design | Manufacturing Process-Dependent | Manufacturing Process-Dependent |
| Curved Neck Geometry | Manufacturing Process-Dependent | Manufacturing Process-Dependent |
| Decorative Finishing | Alloy and Process-Dependent | Alloy and Process-Dependent |
| Component Weight | Depends on Construction | Depends on Construction |
| Mechanical Performance | Grade-Dependent | Grade-Dependent |
| Corrosion Resistance | Alloy and Coating-Dependent | Alloy and Coating-Dependent |
The most suitable material depends on the required performance, finish, product weight, cost, and installation environment.
Neither material should be described as universally stronger or more durable without verified technical information.
The supplied product illustration shows a satin silver metallic appearance.
Satin nickel is one of the typical finish categories listed in the reference sheet.
Its understated appearance complements the straight flat oval grip and curved neck.
Polished chrome is another finish category listed in the drawing.
Customers may inquire about a brighter reflective metallic appearance.
Matte black is identified as a typical finish option.
This finish category can complement contemporary monochrome interiors and minimalist architectural hardware collections.
Satin aluminum is also listed in the reference drawing.
Customers should confirm whether this refers to a particular surface appearance, an aluminum-alloy product configuration, or a specific finishing process.
Customers may inquire about additional decorative finishes according to project requirements.
Any custom color or coating must be evaluated for technical feasibility and commercial availability.
The product rendering shows a satin-looking central gripping section with more reflective highlights around the connecting neck and lever ends.
This illustration should not be interpreted as confirmation of a two-tone production finish or separate component construction.
The final finish appearance should be verified using an approved physical sample.
Before placing a wholesale order, verify:
Zinc alloy or aluminum alloy selection
Exact alloy grade
Solid or hollow construction
Manufacturing process
Surface preparation
Finish type and color
Coating or plating process
Finish durability requirements
Product weight
Intended installation environment
Material Notice: LH1118 is presented as a zinc alloy or aluminum alloy door lever handle. It should not be described as stainless steel unless a separate stainless steel configuration is formally confirmed.
The DEGOL LH1118 Flat Oval Bar Door Lever Handle may be considered for modern interior door applications.
The straight flat oval grip can complement contemporary homes with clean architectural lines.
LH1118 may be considered for compatible bedroom doors when paired with an appropriate latch or privacy locking system.
The minimalist lever design can coordinate with modern residential door finishes.
Its understated metallic appearance may suit contemporary workspaces.
The design can be evaluated for apartment and condominium interior door hardware schedules.
LH1118 may suit compatible office doors, meeting rooms, and administrative spaces.
The handle can be considered for hospitality interiors when the final configuration meets the required durability, security, and locking specifications.
The flattened oval lever offers a contemporary alternative to conventional cylindrical handles.
Door manufacturers may evaluate LH1118 for integration with compatible door constructions and lock systems.
The distinctive flat oval grip provides a recognizable design category for importers, distributors, and wholesalers.
| Door Type | Application Consideration |
|---|---|
| Wooden Interior Doors | Subject to fixing and lock compatibility |
| MDF Interior Doors | Subject to door construction |
| Composite Interior Doors | Subject to approved installation specifications |
| Bedroom Doors | Compatible latch or privacy lock required |
| Apartment Interior Doors | Suitable for evaluation |
| Office Interior Doors | Suitable for evaluation |
| Hotel Interior Doors | Project performance requirements must be verified |
| Metal Interior Doors | Appropriate mounting preparation required |
| Commercial Interior Doors | Subject to project requirements |
| Exterior Entrance Doors | Environmental suitability not established |
| Fire-Rated Doors | Requires appropriate certification and approval |
| Frameless Glass Doors | Direct mounting compatibility not established |
| Sliding Doors | Not intended as a conventional sliding-door pull |
Before selecting LH1118, confirm:
Door material
Door thickness
Lock or latch type
Square spindle dimensions
Spindle length
Mounting arrangement
Fixing-hole positions
Lever handing
Required operating clearance
Applicable project standards
The reference drawing does not establish fire resistance, emergency-exit certification, or suitability for a particular certified door assembly.
The following steps provide a general installation overview for lever-on-round-rose door hardware.
Actual installation must follow the approved LH1118 instructions and the selected lock manufacturer's requirements.
Check the door material, thickness, and locking system.
The reference drawing indicates a suitable door thickness range of 35–55 mm.
Check the lever handle, decorative rose, spindle, mounting components, screws, and accessories against the confirmed packing list.
The supplied drawing does not establish the contents of a complete commercial package.
Determine the correct handle orientation and verify whether the supplied LH1118 configuration is suitable for the required door handing.
Mark the spindle opening and fixing positions using approved installation instructions.
Do not use the market-reference engineering sheet as a drilling template.
Fit the latch or mortise lock according to the lock manufacturer's instructions.
Fit the approved square spindle through the lock follower.
The reference drawing identifies an 8 × 8 mm square spindle and illustrates a typical 100 mm length.
Actual spindle dimensions must be confirmed.
Place the handle in the required orientation.
Check that the curved neck and flat oval gripping section are correctly aligned.
Install the mounting components using the approved fixing method.
The reference drawing shows two approximately Ø4.5 mm mounting holes with a nominal spacing of 38 mm.
These dimensions require verification before drilling.
Install the circular decorative rose cover according to the approved instructions.
Check:
Smooth lever movement
Correct latch retraction
Secure mounting
Proper handle alignment
Adequate hand clearance
Correct lever return where specified
No interference with adjacent fittings
Correct locking operation where applicable
The approved mounting-hole positions, spindle length, fixing screws, handing, and lock compatibility must be confirmed before installation.
The LH1118 features a distinctive flattened oval gripping section that suits contemporary architectural interiors.
The 22 × 12 mm reference cross-section creates a broader front appearance with a slimmer side profile.
The illustrated grip has rounded edges rather than sharp rectangular corners.
The horizontal gripping section provides a clean, simple visual profile.
The curved neck creates a flowing transition between the round rose and straight lever.
The softly rounded end complements the flat oval geometry.
Zinc alloy provides one material category for customers evaluating decorative architectural door hardware.
Aluminum alloy provides another material category for contemporary interior door hardware projects.
The approximately Ø53 mm reference rose coordinates with the smooth lever profile.
The reference sheet identifies a concealed-fixing mounting arrangement for a clean installed appearance.
The reference sheet lists satin nickel, polished chrome, matte black, satin aluminum, and custom finishes.
LH1118 may be considered for compatible residential, apartment, office, and hospitality interior doors.
The design provides a basis for inquiries involving materials, finishes, branding, packaging, and project-specific requirements.
Jiangmen Degol Hardware Co., Ltd. welcomes OEM and ODM inquiries for architectural door hardware, including modern flat oval bar lever handle designs such as LH1118.
Customers may submit technical drawings, reference samples, material requirements, finish specifications, and packaging artwork for evaluation.
Potential private-label requirements include:
Customer logo identification
Customized product model numbers
Product labels
Barcode stickers
Branded packaging
Printed installation instructions
Export carton markings
Customers may inquire about:
Zinc Alloy
Aluminum Alloy
The final material depends on confirmed production availability, alloy grade, technical requirements, and commercial terms.
The reference drawing identifies the following typical finish categories:
Satin Nickel
Polished Chrome
Matte Black
Satin Aluminum
Custom Finishes
Customers should confirm which options are available for the selected material.
Potential design inquiries include:
Handle length
Handle projection
Flat oval grip width
Grip thickness
Curved neck geometry
Rounded lever-end profile
Rose diameter
Rose thickness
Mounting configuration
Design modifications may require revised drawings, tooling, and sample approval.
Customers may inquire about rose dimensions, decorative profiles, and fixing arrangements.
Project-specific fixing requirements can be submitted for technical evaluation.
The reference drawing identifies an 8 mm square spindle and mentions possible 7 mm and 9 mm alternatives.
Actual compatibility and availability must be confirmed.
Potential packaging requirements include:
Private-label product boxes
Protective internal packaging
Branded labels
Barcode identification
Customized installation instructions
Export carton markings
Customers may submit door schedules, architectural drawings, finish references, and estimated order quantities.
Where available, physical samples may be requested to verify dimensions, material, finish, appearance, and installation compatibility before bulk ordering.
OEM / ODM Notice: All customization requests are subject to technical feasibility, tooling requirements, MOQ, sample approval, and agreed production lead times.
| Item | Information |
|---|---|
| Product Model | LH1118 |
| Brand | DEGOL |
| Product Name | Flat Oval Bar Door Lever Handle on Round Rose |
| Material Options | Zinc Alloy or Aluminum Alloy |
| Final Material | To Be Confirmed |
| Illustrated Appearance | Satin Silver Metallic |
| Typical Finish Inquiries | Satin Nickel / Polished Chrome / Matte Black / Satin Aluminum / Custom |
| Lever Quantity | To Be Confirmed |
| Round Rose | Illustrated; Package Quantity TBC |
| Concealed Fixing Components | To Be Confirmed |
| Standard Reference Spindle | 8 × 8 mm Square |
| Reference Spindle Length | 100 mm |
| Optional Spindle Sizes | 7 mm / 9 mm – Subject to Confirmation |
| Keyhole Escutcheons | Not Illustrated |
| Mortise Lock Body | Not Confirmed as Included |
| Lock Cylinder | Not Confirmed as Included |
| MOQ | Subject to Quotation |
| Sample Availability | On Request |
| OEM Packaging | Subject to Confirmation |
| Production Lead Time | Subject to Order Confirmation |
| Payment Terms | To Be Negotiated |
| Shipping Terms | Subject to Quotation |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Step 1 – Submit Your Inquiry
Provide model LH1118, required quantity, preferred material, finish, and destination country.
Step 2 – Confirm the Material
Specify whether the requested configuration should use zinc alloy or aluminum alloy.
Step 3 – Confirm the Finish
Select the required surface appearance and request confirmation of production availability.
Step 4 – Verify Technical Specifications
Request approved dimensions, mounting details, spindle specifications, and lock compatibility information.
Step 5 – Request Samples
Contact DEGOL regarding sample availability, pricing, and shipping arrangements.
Step 6 – Confirm OEM / ODM Requirements
Submit branding, packaging, or custom drawing requirements where applicable.
Step 7 – Review the Wholesale Quotation
Confirm unit pricing, MOQ, lead time, payment terms, and shipping arrangements.
Step 8 – Approve the Final Product Configuration
Review approved technical specifications and physical samples where required.
Step 9 – Arrange Production and Delivery
Production and shipment follow the confirmed purchase order and agreed commercial terms.
Product Model: LH1118
Required Order Quantity
Preferred Material: Zinc Alloy or Aluminum Alloy
Required Surface Finish
Door Thickness
Lock and Spindle Requirements
Concealed Fixing Requirements
Required Package Contents
OEM / ODM Requirements
Packaging Preferences
Destination Country
Expected Delivery Schedule
Jiangmen Degol Hardware Co., Ltd. is a China-based hardware manufacturer and export supplier serving international customers with door hardware and related architectural fittings.
DEGOL welcomes wholesale and OEM / ODM inquiries from distributors, importers, door manufacturers, contractors, and professional purchasing teams.
Customers may inquire about:
Zinc alloy door handles
Aluminum alloy door handles
Flat oval bar door handles
Straight lever handles
Round rose door handles
Modern interior door handles
Decorative lever handle designs
Door escutcheons
Door locks and mortise lock bodies
Door hinges
Related architectural door accessories
Specific product availability must be confirmed.
DEGOL welcomes inquiries involving customer drawings, reference samples, material requirements, and project specifications.
Custom product development is subject to technical evaluation.
For LH1118, customers may inquire about zinc alloy and aluminum alloy configurations.
The exact alloy grade, construction, and manufacturing process must be confirmed.
The reference drawing identifies satin nickel, polished chrome, matte black, satin aluminum, and custom finishes as typical options for this style.
Customers may discuss specific color, texture, and finish-performance requirements.
The reference drawing illustrates a flat oval lever, curved connecting neck, round decorative rose, rear fixing arrangement, and square spindle.
The complete commercial package configuration must be confirmed.
Buyers may request information about inspection procedures covering:
Product dimensions
Surface appearance
Lever alignment
Mounting fit
Spindle compatibility
Lever operation
Finish requirements
Packaging condition
LH1118-specific test reports, certifications, and performance ratings must be verified separately.
International customers may submit requests involving:
Material selection
Lever geometry modifications
Surface finishes
Private-label branding
Customized packaging
Project-specific hardware configurations
DEGOL welcomes inquiries from:
Architectural hardware importers
Door handle wholesalers
Regional hardware distributors
Door manufacturers
Building material suppliers
Construction contractors
Hotel project purchasing teams
International hardware brands
OEM / ODM customers
For LH1118, customers may request:
Approved technical drawings
Verified product dimensions
Material specifications
Available finishes
Flat oval grip dimensions
Rose dimensions
Concealed fixing details
Spindle specifications
Lock compatibility information
Sample information
Packaging specifications
Wholesale quotations
Factory Capability Notice: General company information does not establish the availability, production capacity, certification, or exact manufacturing process of a particular LH1118 configuration. Model-specific details require confirmation.
The DEGOL LH1118 is a modern flat oval bar door lever handle featuring a straight flattened gripping section, a curved connecting neck, and a round mounting rose.
The reference engineering drawing identifies zinc alloy or aluminum alloy as the material options.
Zinc alloy is listed as a material option. Actual production availability and alloy grade should be confirmed with DEGOL.
Aluminum alloy is also listed as a material option. The exact production configuration requires confirmation.
The supplied reference sheet identifies zinc alloy or aluminum alloy, not stainless steel.
Zinc alloys generally have higher density than aluminum alloys. Mechanical performance, corrosion resistance, and finish compatibility depend on the exact alloy and manufacturing process.
The appropriate material depends on the required weight, mechanical performance, finish, budget, and intended application.
LH1118 has a modern minimalist design combining a straight flat oval grip with a smooth curved connecting neck.
Yes. The main gripping section is illustrated as a straight horizontal bar.
The grip has a flattened oval cross-section. It is neither a fully circular tube nor a sharp-edged rectangular bar.
The reference specification identifies a handle length of 126 mm.
The reference handle width is 22 mm.
The reference handle thickness is 12 mm.
The reference grip section measures approximately 22 × 12 mm.
The reference projection is 60 mm.
Yes. The supplied drawing illustrates a smooth curved connecting neck.
The reference drawing does not specify the exact curvature radius.
Yes. The drawing shows a softly rounded outer end.
The supplied drawing does not confirm whether the handle is solid or hollow.
Yes. The product is illustrated with a circular mounting rose.
The reference rose diameter is Ø53 mm.
The reference rose thickness is 9 mm.
The reference product features identify concealed screw fixing. The exact mounting system must be confirmed.
The rear mounting drawing indicates a reference spacing of 38 mm.
The reference drawing identifies two approximately Ø4.5 mm mounting holes.
The reference drawing identifies an 8 × 8 mm square spindle.
The reference spindle length is 100 mm.
The reference sheet mentions optional 7 mm and 9 mm square spindle sizes. Actual availability and compatibility require confirmation.
The reference drawing indicates a door thickness range of 35–55 mm.
Yes. The supplied reference sheet identifies interior doors as the intended application.
LH1118 may be considered for compatible wooden interior doors when the mounting system and lock mechanism are suitable.
Metal door compatibility depends on the door construction, fixing method, and selected lock configuration.
LH1118 may be considered for compatible office interior doors.
The design can be evaluated for hospitality interiors, subject to the required security, durability, and locking specifications.
Exterior suitability has not been confirmed. Material, finish, corrosion resistance, and environmental exposure requirements should be reviewed.
No LH1118 fire-rating documentation has been provided.
The reference drawing lists satin nickel, polished chrome, matte black, satin aluminum, and custom finishes. Actual production availability must be confirmed.
Satin nickel is listed as a typical finish category. Customers should confirm the available production configuration.
Polished chrome is listed in the reference sheet. Actual availability requires confirmation.
Matte black is identified as a typical finish option. Customers may inquire about availability for the selected material.
Satin aluminum is listed as a typical finish category. The actual material and surface treatment should be confirmed.
The rendering shows different metallic highlights, but it does not establish a verified two-tone production finish.
The supplied drawing does not illustrate keyhole escutcheons. Their availability or inclusion must be confirmed.
The reference sheet does not establish that a mortise lock body is included.
Only a single lever is illustrated. The standard package quantity must be confirmed.
The supplied drawing does not confirm reversibility or handing requirements.
The reference drawing does not verify an internal return spring.
LH1118 features a flattened oval grip with a reference cross-section of 22 × 12 mm.
LH1052 features a cylindrical grip with a reference diameter of Ø20 mm.
Both designs use a curved connecting neck, but their gripping profiles are different.
LH1118 has a flattened oval grip and a smooth curved neck.
LH1051 has a round cylindrical grip and a shorter connecting neck with an angled transition.
DEGOL welcomes OEM / ODM inquiries involving material selection, finishes, branding, packaging, and possible design modifications.
Customers may inquire about private-label branding and customized packaging.
Customers may contact DEGOL to inquire about sample availability, pricing, and shipping arrangements.
The confirmed MOQ has not been provided. It should be requested according to the material, finish, and packaging requirements.
No. The supplied drawing is based on typical market data for this handle style and should not be used as an approved manufacturing or drilling drawing.
Buyers may request verified dimensions and approved technical documentation from DEGOL.
DEGOL welcomes wholesale inquiries from architectural hardware importers, distributors, door manufacturers, and professional buyers.
Customers may submit OEM / ODM requirements for technical and commercial evaluation.
Contact DEGOL via WhatsApp at +86 13725946499 or email info@degolhardware.com.
Provide the model number, preferred material, finish, quantity, and destination country.
Provide model LH1118, order quantity, zinc alloy or aluminum alloy preference, required finish, door thickness, spindle and lock requirements, packaging preferences, and destination country.
Looking for a modern flat oval bar door lever handle with a smooth curved neck, zinc alloy or aluminum alloy material options, and a concealed-fixing round rose?
Contact DEGOL Hardware for confirmed product specifications, approved technical drawings, material information, available finishes, sample details, OEM / ODM requirements, packaging options, and wholesale pricing.
Product Model: LH1118
Product Name: DEGOL LH1118 Modern Flat Oval Bar Door Lever Handle on Round Rose – Zinc Alloy or Aluminum Alloy
Material Options: Zinc Alloy or Aluminum Alloy
Typical Finish Inquiries: Satin Nickel, Polished Chrome, Matte Black, Satin Aluminum, Custom Finishes
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your LH1118 Zinc Alloy or Aluminum Alloy Flat Oval Bar Door Lever Handle Wholesale Quote Today.
