 |
LH1104
Degol
| Quantity: | |
|---|---|
The DEGOL LH1104 Wave-Shaped Stainless Steel Door Lever Handle Set is a contemporary architectural door hardware solution featuring an elegant flowing lever profile, a circular mounting rose, and matching Euro profile escutcheons.
Designed with a distinctive wave-inspired silhouette, the LH1104 combines gentle curves, a smoothly sculpted gripping surface, and a brushed satin stainless steel appearance to complement modern architectural interiors.
Unlike conventional straight tubular door handles or angular lever designs, the LH1104 features a gracefully curved lever that gradually transitions into a wider, softly rounded grip. This creates a recognizable modern appearance while providing a practical lever-operated door opening design.
The handle features an approximate length of 125–130 mm, a 60 mm projection, and a maximum grip width of 22 mm. Its Ø52 mm round rose coordinates with matching circular Euro profile escutcheons for a consistent appearance across the door hardware installation.
The brushed satin finish provides a subtle metallic texture suitable for contemporary residential interiors, hotels, office buildings, apartments, and compatible commercial door projects.
Jiangmen Degol Hardware Co., Ltd. supplies architectural door hardware solutions for international wholesalers, importers, distributors, door manufacturers, construction contractors, and hardware brands seeking bulk sourcing and OEM/ODM cooperation.
Key Product Highlights
Distinctive wave-shaped stainless steel lever design
Smooth sculpted gripping profile with rounded edges
Modern brushed satin surface finish
Compact Ø52 mm circular mounting rose
Matching round Euro profile escutcheons
Approximate lever length of 125–130 mm
Standard-size 8 × 8 mm square spindle interface
Designed for compatible 35–55 mm door thicknesses
Suitable for contemporary architectural hardware collections
Wholesale sourcing and OEM/ODM inquiries welcomed
The DEGOL LH1104 is a stainless steel door lever handle set distinguished by its flowing wave-shaped grip, round mounting rose, and coordinated Euro profile escutcheon design.
A lever handle is an operating component used to retract a compatible door latch through a spindle mechanism. The LH1104 uses an approximately 8 × 8 mm square spindle interface, subject to final lock and installation compatibility.
1. Wave-Shaped Lever Profile
The LH1104 features a flowing curved lever that creates a sculptural appearance compared with conventional straight door handles.
2. Sculpted Grip Design
The gripping section changes gradually in contour, producing a wider rounded end and a visually balanced lever shape.
3. Round Rose Mounting
The handle is designed around a Ø52 mm circular rose with an approximate thickness of 10 mm.
4. Euro Profile Escutcheon
Matching circular escutcheons feature a Euro profile opening intended for use with compatible cylinder-operated locking arrangements.
5. Square Spindle Interface
The 8 × 8 mm square spindle transfers rotational movement from the lever to a compatible latch or mortise lock mechanism.
6. Brushed Satin Appearance
The satin-finished stainless steel surface coordinates with modern doors, hinges, lock hardware, and architectural fittings.
The illustrated arrangement comprises opposing wave-shaped lever handles, round mounting roses, and matching Euro profile escutcheons.
The final supply configuration, including fixing plates, spindle, screws, and other installation components, should be confirmed before purchase.
A lock case or Euro profile cylinder should not be assumed to be included unless specified in the sales quotation.
Parameter | Specification |
|---|---|
Product Model | LH1104 |
Brand | DEGOL |
Product Name | Wave-Shaped Stainless Steel Door Lever Handle Set |
Product Category | Architectural Door Hardware |
Product Type | Door Lever Handle Set with Euro Escutcheons |
Handle Style | Modern / Contemporary |
Lever Shape | Wave-Shaped / Sculpted Curved |
Reference Material | Stainless Steel |
Stainless Steel Grade | Not Specified |
Surface Finish | Brushed Satin |
Lever Length | Approx. 125–130 mm |
Maximum Grip Width | Approx. 22 mm |
Handle Projection | Approx. 60 mm |
Rose Shape | Round |
Rose Diameter | Ø52 mm |
Rose Thickness | Approx. 10 mm |
Escutcheon Shape | Round |
Escutcheon Diameter | Ø52 mm |
Escutcheon Type | Euro Profile |
Euro Opening Size | Approx. 17 × 33 mm |
Spindle Size | 8 × 8 mm Square |
Door Thickness | Approx. 35–55 mm |
Handle Configuration | Opposing Handles Illustrated |
Spring Mechanism | Not Specified |
Lock Compatibility | Subject to Selected Lock System |
Mounting Type | Door Mounted |
Main Applications | Residential / Hotel / Office / Commercial Interior |
OEM / ODM | Subject to Order Requirements |
Country of Origin | China |
Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
Specification Notice: All dimensional information is based on the supplied LH1104 reference technical drawing. Dimensions are approximate and should be verified against a physical production sample before manufacturing, drilling, purchasing, or installation.
The LH1104 technical drawing provides front elevation, top view, and side view information to support initial product evaluation, architectural hardware selection, and purchasing discussions.
The reference drawing identifies an approximate lever length of 125–130 mm.
The sculpted profile extends horizontally from the mounting stem and gradually widens toward the rounded gripping end.
The reference side view indicates a handle projection of approximately 60 mm.
This measurement is relevant when evaluating clearance between the lever and surrounding architectural elements.
Final installed projection should be confirmed with a physical sample.
The LH1104 lever has a maximum illustrated grip width of approximately 22 mm.
Because the lever features a sculpted wave-shaped profile, this measurement refers to the maximum width and should not be interpreted as a constant tubular diameter.
The handle is mounted on a circular rose measuring approximately 52 mm in diameter.
The compact round shape complements the curved lever profile and provides a clean appearance for modern door installations.
The illustrated rose thickness is approximately 10 mm.
The actual mounting arrangement may include internal fixing components, depending on the production configuration.
The coordinated Euro profile escutcheons feature circular covers measuring approximately Ø52 mm.
Their matching dimensions create a visually consistent design with the handle mounting roses.
The Euro profile escutcheon opening measures approximately 17 × 33 mm.
This opening is intended to accommodate a compatible Euro profile cylinder arrangement.
The measurement describes the reference cutout and does not establish cylinder length, lock backset, or lever-to-cylinder centre distance.
The specification identifies an 8 × 8 mm square spindle.
The required spindle length depends on the door thickness, latch or lock body, and mounting arrangement.
The reference drawing indicates an applicable door thickness range of approximately 35–55 mm.
Final compatibility must be verified against the selected installation hardware.
Component | Dimension |
|---|---|
Lever Length | 125–130 mm |
Maximum Grip Width | 22 mm |
Handle Projection | 60 mm |
Handle Rose Diameter | Ø52 mm |
Handle Rose Thickness | 10 mm |
Escutcheon Diameter | Ø52 mm |
Euro Profile Opening | Approx. 17 × 33 mm |
Square Spindle | 8 × 8 mm |
Recommended Reference Door Thickness | Approx. 35–55 mm |
Technical Drawing Note: The supplied drawing provides reference dimensions but does not establish precise fixing-hole centres, rose fixing structure, spring-return construction, Euro cylinder centre distance, or lock case specifications. These requirements should be confirmed before preparing a door for installation.
The LH1104 reference specification identifies stainless steel as the product material.
Stainless steel is commonly selected for architectural door hardware because it offers a clean metallic appearance and can provide corrosion resistance appropriate to the selected material grade and application environment.
The exact stainless steel grade used for LH1104 has not been confirmed.
Customers requiring a specific grade, such as SUS304, should request material confirmation before placing an order.
The LH1104 features a brushed satin metallic finish.
This finish creates a softly reflective surface with a subtle directional texture, providing a contemporary appearance suitable for modern architectural projects.
Its neutral silver appearance coordinates with many stainless steel hinges, lock faceplates, escutcheons, and other door hardware accessories.
Customers may discuss the feasibility of additional surface finishes, including:
Polished stainless steel appearance
Matte black
Customized decorative metallic finishes
Project-specific finish requirements
Alternative finishes are not established as standard LH1104 options and are subject to confirmation of material compatibility, processing requirements, order quantity, and production feasibility.
For brushed satin stainless steel surfaces, routine maintenance generally involves wiping with a soft cloth and a suitable mild cleaning solution.
Avoid abrasive pads, harsh chemicals, and inappropriate cleaning agents that could damage the decorative surface.
Cleaning procedures should be matched to the final confirmed material and coating specification.
The DEGOL LH1104 Wave-Shaped Stainless Steel Door Lever Handle Set is designed for contemporary architectural hardware applications.
Its curved lever silhouette and coordinated round rose design make it suitable for consideration across multiple interior environments.
Suitable for compatible interior doors in private homes, apartments, residential buildings, and modern housing developments.
The satin metallic appearance and distinctive curved shape make LH1104 a design option for hotel guestroom entrances, private interior rooms, and hospitality renovation projects, subject to lock compatibility and project hardware specifications.
The clean architectural appearance complements modern office doors, private meeting rooms, administrative spaces, and workplace interiors.
The LH1104 may be considered by building material suppliers and project contractors sourcing coordinated interior door hardware for apartment and condominium projects.
The handle is relevant to commercial interior design schemes requiring visually coordinated lever handles and Euro profile escutcheons.
Actual suitability depends on applicable performance, access, security, and building-code requirements.
The distinctive wave-shaped design provides an additional product style for wholesale door hardware collections and interior building material catalogues.
The LH1104 is intended for compatible swing-door installations using an appropriate latch or mortise lock mechanism.
Door Type | Suitability |
|---|---|
Wooden Interior Doors | Suitable when correctly prepared |
MDF Interior Doors | Subject to structural fixing compatibility |
Composite Interior Doors | Subject to door and lock specifications |
Metal Interior Doors | Subject to suitable mounting preparation |
Residential Bedroom Doors | Compatible latch configuration required |
Office Interior Doors | Suitable subject to hardware requirements |
Hotel Guestroom Doors | Subject to project lock specifications |
Commercial Interior Doors | Subject to duty and performance requirements |
Exterior Doors | Material and exposure suitability must be verified |
Fire-Rated Doors | Requires appropriate assembly testing and certification |
Glass Doors | Not established for direct glass mounting |
Sliding Doors | Not intended as a conventional sliding-door pull |
Before selecting LH1104, confirm door thickness, latch spindle size, fixing-hole arrangement, lock body specification, and required cylinder configuration.
The LH1104 should not automatically be described as suitable for fire-rated, emergency-exit, or high-security door assemblies without the relevant technical documentation.
The following is a general installation sequence for a lever-on-rose handle set. The exact steps depend on the confirmed LH1104 fixing components and compatible lock mechanism.
Step 1 – Confirm Door Compatibility
Check that the selected door thickness falls within the recommended reference range of 35–55 mm.
Verify the spindle interface and door lock compatibility.
Step 2 – Prepare the Door
Mark and prepare the spindle opening and required fixing points according to the confirmed LH1104 installation drawing and the selected lock manufacturer's instructions.
Avoid drilling based solely on approximate product illustrations.
Step 3 – Install the Lock Mechanism
Fit the compatible latch or mortise lock according to the lock manufacturer's installation requirements.
Ensure the latch mechanism operates correctly before mounting the handles.
Step 4 – Position the Square Spindle
Insert the correctly sized 8 × 8 mm square spindle through the lock follower.
Confirm adequate spindle engagement on both sides.
Step 5 – Install the Lever Handle Assemblies
Position the lever handles and mounting components on the door.
Secure them using the confirmed fixing system supplied with the order.
Step 6 – Install the Round Rose Covers
Fit the circular rose covers according to the final product fixing structure.
Confirm that both assemblies are aligned correctly.
Step 7 – Install the Euro Profile Escutcheons
If included in the ordered configuration, position the matching escutcheons around the compatible Euro profile cylinder opening.
Verify the required lock and cylinder alignment before securing the covers.
Step 8 – Test the Installation
Operate the handles several times to verify:
Smooth lever movement
Correct latch retraction
Proper handle alignment
Secure mounting
Correct cylinder operation, when applicable
Suitable clearances and return action according to the selected mechanism
The final installation must follow the approved production drawing and the selected door lock manufacturer's requirements.
Spindle length, fixing screws, cylinder configuration, and mounting details should be checked before installation.
The LH1104 features a sculpted flowing profile that visually differentiates it from conventional straight tubular and square-section lever handles.
Its soft curves provide a recognizable contemporary aesthetic.
The brushed stainless steel appearance coordinates with minimalist, contemporary, and modern architectural design schemes.
The rounded tip and gradually changing lever contour provide a smooth gripping profile without the sharp visual edges of angular lever designs.
The Ø52 mm round rose provides a simple architectural base that balances the curved lever design.
Matching escutcheons allow buyers to specify a visually consistent arrangement for compatible Euro cylinder locking systems.
The product can be considered for a variety of residential, office, hospitality, and commercial interior door projects.
The supplied technical drawing provides essential preliminary measurements for product evaluation, specification discussions, and purchasing inquiries.
The wave-inspired lever profile offers a distinct visual option for importers, wholesalers, and distributors building contemporary door hardware ranges.
Buyers can discuss private-label packaging, finish requirements, dimensional modifications, and customer-specific configurations with DEGOL.
International buyers can contact Jiangmen Degol Hardware Co., Ltd. to discuss wholesale pricing, technical specifications, samples, and customized procurement requirements.
Jiangmen Degol Hardware Co., Ltd. welcomes OEM and ODM inquiries for LH1104 architectural door hardware.
Customers seeking private-label door handles, customized decorative finishes, or product-specific packaging can discuss their requirements directly with DEGOL.
Potential branding requirements include custom labels, customer-specific product codes, branded boxes, barcode labels, and export carton markings.
Buyers may request evaluation of alternative surface finishes and decorative colors for particular market requirements.
Finish availability depends on the base material, processing feasibility, and order quantity.
Potential engineering requests include modifications to lever length, projection, grip profile, rose dimensions, or mounting configurations.
Changes to the original design require technical review and may involve tooling costs.
Customers may discuss matching escutcheon options for different lock systems.
Compatibility must be established before confirming any revised configuration.
DEGOL can be contacted regarding customized packaging solutions for hardware brands, distributors, wholesalers, and regional importers.
Buyers may submit door schedules, reference samples, technical drawings, material requirements, and estimated order quantities for technical evaluation.
OEM / ODM Notice: Customized specifications, material grades, finishing options, tooling requirements, MOQ, lead times, and prices must be confirmed for each project before production.
Item | Information |
|---|---|
Product Model | LH1104 |
Product Name | Wave-Shaped Stainless Steel Door Lever Handle Set |
Brand | DEGOL |
Main Material | Stainless Steel – Grade to Be Confirmed |
Reference Finish | Brushed Satin |
Lever Handles | Opposing pair illustrated; final quantity to be confirmed |
Round Roses | Illustrated; supply configuration to be confirmed |
Euro Profile Escutcheons | Illustrated; inclusion to be confirmed |
Square Spindle | 8 × 8 mm interface; supply length and inclusion to be confirmed |
Fixing Accessories | Subject to confirmed packing list |
Lock Case | Not confirmed as included |
Euro Cylinder | Not confirmed as included |
Minimum Order Quantity | Subject to Quotation |
Sample Availability | On Request |
OEM Packaging | Subject to Confirmation |
Production Lead Time | Subject to Order Confirmation |
Payment Terms | To Be Negotiated |
Shipping Terms | Subject to Quotation |
Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
Country of Origin | China |
1. Send Product Inquiry
Provide model LH1104, required quantity, preferred finish, door thickness, and destination country.
2. Confirm Technical Specifications
Review the product dimensions, material grade, locking compatibility, spindle requirements, and final product configuration.
3. Request Samples
Contact DEGOL regarding sample availability, pricing, and shipping arrangements.
4. Confirm OEM / ODM Requirements
Provide any specific packaging artwork, branding instructions, finish samples, or revised drawings.
5. Review Wholesale Quotation
Confirm unit prices, MOQ, packing details, lead time, and shipping terms.
6. Approve Production Requirements
Finalize the approved sample, technical specifications, packing list, and commercial conditions before production.
7. Arrange Shipment
Production completion, inspection arrangements, and shipping procedures follow the agreed purchase order terms.
Jiangmen Degol Hardware Co., Ltd. is a China-based architectural hardware supplier serving international B2B purchasing requirements.
DEGOL's product portfolio includes door handles, door locks, hinges, escutcheons, and related architectural fittings.
The company describes its operations as covering product sourcing, machining, production workshop activities, inspection, packaging, and international hardware supply.
DEGOL welcomes inquiries for:
Stainless steel door lever handles
Modern wave-shaped door handles
Curved lever handles on round roses
Tubular door handle designs
Matching Euro profile escutcheons
Interior door handle sets
Mortise lock and latch hardware
Residential and commercial door fittings
Architectural hardware accessories
OEM and private-label hardware products
DEGOL works with the types of customers commonly involved in architectural hardware sourcing, including international importers, wholesalers, regional distributors, building material suppliers, door manufacturers, hardware brands, and construction purchasing teams.
Customers can submit product drawings, sample requirements, material specifications, finish standards, branding details, and packaging requirements for evaluation.
For LH1104, customers may request technical drawings, confirmed product dimensions, material-grade information, installation guidance, sample availability, packing specifications, and wholesale pricing.
Factory-specific production capacity, testing performance, material certifications, and product compliance documents should be confirmed before being used in formal project specifications or procurement agreements.
The DEGOL LH1104 is a modern wave-shaped stainless steel door lever handle set featuring sculpted curved levers, Ø52 mm round roses, and matching Euro profile escutcheons.
The LH1104 features a flowing wave-shaped lever and a widened rounded grip rather than a straight cylindrical handle. This creates a distinctive contemporary architectural appearance.
The supplied technical drawing identifies stainless steel as the material. The exact stainless steel grade should be confirmed with DEGOL before ordering.
SUS304 has not been verified as the standard LH1104 material. Customers requiring SUS304 should request confirmation of the available material options.
The reference specification identifies a brushed satin finish.
The approximate lever length is 125–130 mm, based on the supplied technical drawing.
The round mounting rose measures approximately Ø52 mm and has a reference thickness of 10 mm.
The LH1104 has an approximate projection of 60 mm, as shown in the reference side view.
The maximum illustrated grip width is approximately 22 mm. The sculpted lever profile varies in width along its length.
Matching round Euro profile escutcheons are illustrated in the product drawing. Their inclusion in the commercial package should be confirmed before ordering.
The illustrated Euro profile opening measures approximately 17 × 33 mm.
Actual compatibility with the selected cylinder must be checked.
The reference specification identifies an 8 × 8 mm square spindle.
The spindle length must be selected according to the door thickness and lock configuration.
The reference specification indicates an applicable door thickness range of approximately 35–55 mm.
Final suitability depends on the spindle, fixing accessories, and lock mechanism.
Yes, LH1104 may be used on compatible wooden interior doors when the door thickness, mounting details, and lock specification are suitable.
The design may be considered for hotel, office, and other commercial interior projects, provided the selected hardware meets the relevant installation and performance requirements.
Exterior suitability has not been established. Material grade, corrosion resistance, finish performance, environmental exposure, and relevant technical documentation must be evaluated first.
No fire-rating certification has been provided for LH1104. Fire-door suitability requires verification of the relevant door assembly, hardware configuration, and applicable approvals.
The provided drawing does not confirm the spring mechanism. Buyers should request this information before selecting a compatible lock or latch.
Opposing handles are shown in the reference drawing, but universal reversibility has not been verified. Confirm handing requirements before ordering.
The supplied drawing identifies a lever handle set with Euro profile escutcheons, but it does not confirm that a mortise lock case or Euro cylinder is included.
The final packing list should establish the supplied components.
Customers may inquire about alternative decorative finishes, subject to material compatibility, production feasibility, and order requirements.
DEGOL welcomes OEM inquiries for private-label branding, customized labels, product identification, and packaging.
Customers may submit technical drawings or reference samples for feasibility evaluation, including dimensional or design modifications.
Customers can contact DEGOL to request sample availability, sample costs, and shipping information.
The confirmed MOQ is not specified in the supplied LH1104 drawing. It should be requested according to the selected material, finish, packaging, and order configuration.
Buyers may request the available LH1104 technical drawing and confirmed dimensions for evaluation and project planning.
DEGOL welcomes bulk sourcing inquiries from architectural hardware distributors, importers, wholesalers, door manufacturers, and hardware brands.
Contact DEGOL through WhatsApp at +86 13725946499 or email info@degolhardware.com.
For an accurate quotation, provide model LH1104, required quantity, preferred material grade, finish, packaging requirements, and destination market.
Looking for an LH1104 wave-shaped stainless steel door lever handle set with round roses and Euro profile escutcheons for your architectural door hardware range?
Contact DEGOL Hardware for product specifications, technical drawings, available finishes, sample information and wholesale pricing.
Product Model: LH1104
Product Name: LH1104 Modern Wave-Shaped Stainless Steel Door Lever Handle Set with Round Rose and Euro Profile Escutcheons
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your LH1104 Wave-Shaped Stainless Steel Door Lever Handle Set Wholesale Quote Today
