 |
LH1105
Degol
| Quantity: | |
|---|---|
The DEGOL LH1105 Modern Flat Rectangular Door Lever Handle Set is a contemporary architectural door hardware design featuring a straight flat-bar lever, a geometric square mounting rose, and a matching square escutcheon with a vertical oval keyhole opening.
Designed for modern and minimalist architectural interiors, the LH1105 combines clean horizontal lines, a broad rectangular gripping surface, and a satin silver appearance to create a simple yet distinctive door hardware solution.
Unlike conventional cylindrical tubular lever handles or curved lever designs, the LH1105 features a straight rectangular bar with a flat front surface and softly finished edges. Its linear geometry coordinates with modern wooden doors, contemporary interior door panels, square hinges, and other minimalist architectural hardware.
The reference design features an approximately 135 mm lever length, 60 mm handle projection, 24 mm lever face height, and a compact 52 × 52 mm square mounting rose. A matching square escutcheon with a vertically oriented oval slot provides a coordinated appearance.
These dimensions are preliminary market-based references and must be verified against the actual LH1105 product before manufacturing or installation.
The LH1105 design is suitable for consideration in residential developments, hotels, offices, apartments, and commercial interior projects requiring contemporary lever handle styling.
Jiangmen Degol Hardware Co., Ltd. welcomes wholesale, OEM, and ODM inquiries from international architectural hardware importers, distributors, door manufacturers, building material suppliers, and project contractors.
Modern flat rectangular door lever design
Straight geometric flat-bar handle profile
Minimalist square rose mounting design
Matching square keyhole escutcheon
Vertical oval escutcheon opening
Satin silver decorative appearance
Approx. 135 mm reference lever length
Approx. 52 × 52 mm square rose
Approx. 60 mm reference projection
Suitable for modern interior door hardware collections
Wholesale sourcing and customized product inquiries welcomed
OEM / ODM support subject to technical and commercial confirmation
The DEGOL LH1105 is a modern lever-on-square-rose door handle design characterized by a straight rectangular gripping bar, a compact square mounting plate, and a matching square escutcheon with a vertical oval opening.
A lever door handle is an operating component used to open a compatible hinged door by rotating a spindle connected to a latch or mortise lock mechanism.
The LH1105 is distinguished by its simple rectangular geometry rather than a conventional round tubular, curved, or wave-shaped lever.
1. Flat Rectangular Lever Design
The handle features a long, straight rectangular gripping section with a broad flat front face.
This creates a clean horizontal appearance that complements modern architectural interiors.
2. Geometric Square Rose
The lever is supported by a square mounting rose, providing a balanced geometric appearance and a coordinated base for the straight handle design.
3. Central Lever Neck
The reference illustration shows a cylindrical connecting neck between the square rose and rectangular gripping bar.
The connection creates a visual contrast between the round support section and the flat rectangular lever.
4. Matching Square Escutcheon
The illustrated escutcheon uses a matching square outer profile to coordinate with the lever mounting rose.
5. Vertical Oval Keyhole Opening
The escutcheon features a vertically oriented rounded slot.
Its actual lock type and keyhole compatibility must be confirmed. The opening should not automatically be classified as a Euro profile cylinder cutout.
6. Satin Silver Appearance
The illustrated surface has a satin silver metallic appearance with subtle linear brushing.
The actual base material and surface treatment require confirmation.
The reference image identifies the following visible components:
Flat rectangular lever handle
Square mounting rose
Cylindrical lever neck
Matching square escutcheon
Vertical oval escutcheon opening
The final commercial configuration, including the number of lever handles, roses, escutcheons, spindles, screws, and mounting accessories, should be confirmed before ordering.
| Specification Item | Details |
|---|---|
| Brand | DEGOL |
| Model Number | LH1105 |
| Product Name | Flat Rectangular Door Lever Handle Set |
| Product Category | Architectural Door Hardware |
| Handle Type | Lever on Square Rose |
| Lever Design | Straight Flat Rectangular Bar |
| Handle Shape | Flat / Rectangular / Geometric |
| Design Style | Modern / Minimalist / Contemporary |
| Reference Surface Finish | Satin Silver Appearance |
| Reference Lever Length | Approx. 135 mm |
| Reference Handle Projection | Approx. 60 mm |
| Reference Lever Face Height | Approx. 24 mm |
| Rose Shape | Square |
| Reference Rose Width | Approx. 52 mm |
| Reference Rose Height | Approx. 52 mm |
| Reference Rose Thickness | Approx. 10 mm |
| Escutcheon Shape | Square |
| Reference Escutcheon Size | Approx. 52 × 52 mm |
| Escutcheon Thickness | Not Independently Verified |
| Escutcheon Opening Type | Vertical Oval Slot |
| Reference Slot Width | Approx. 8 mm |
| Reference Slot Height | Approx. 24 mm |
| Lock Compatibility | Subject to Selected Lock Mechanism |
| Installation Type | Door Mounted |
| Applications | Residential and Commercial Interior Doors |
| OEM / ODM | Subject to Feasibility |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Important Specification Notice: All dimensions listed above are approximate references derived from the supplied preliminary engineering illustration and comparable market products. They are not verified LH1105 factory specifications. The final production material, dimensions, fixing arrangement, spindle, finish, and lock compatibility must be confirmed by DEGOL before ordering, manufacturing, or installation.
The LH1105 preliminary reference drawing illustrates the handle through isometric, front elevation, top, and side-end views.
These views provide a preliminary understanding of the handle geometry, square rose dimensions, projection, and matching escutcheon design.
The reference illustration shows an approximate horizontal lever length of 135 mm.
The flat rectangular bar extends from the central support neck to a straight, softly finished end.
The geometric design creates a consistent horizontal appearance suitable for contemporary door hardware applications.
The final measurement datum and actual production length must be confirmed.
The preliminary top and side illustrations indicate a handle projection of approximately 60 mm.
Handle projection describes how far the lever assembly extends outward from its mounting area.
This measurement helps architects and hardware purchasers evaluate the clearance and visual proportions of the lever.
The final installed projection may depend on the production mounting structure.
The reference drawing identifies an approximate lever face height of 24 mm.
The broad rectangular front face distinguishes LH1105 from slim cylindrical and square-tube lever handles.
The exact bar thickness and cross-sectional dimensions have not been independently verified.
The handle is shown mounted on a square rose with the following reference dimensions:
Width: Approx. 52 mm
Height: Approx. 52 mm
Thickness: Approx. 10 mm
The square rose provides a compact geometric mounting base.
Its shape coordinates with rectangular handles, square lock accessories, and contemporary door hardware designs.
The reference design features a cylindrical neck connecting the square rose to the flat rectangular handle.
This creates a distinctive combination of round and rectangular structural forms.
The neck diameter, fixing method, and internal construction have not been specified.
The illustrated escutcheon has a square outer profile measuring approximately 52 × 52 mm.
Its matching geometry creates a coordinated appearance with the main lever rose.
The final thickness and fixing structure should be confirmed independently.
The escutcheon features a narrow, vertically oriented slot with rounded ends.
Reference dimensions:
Slot Width: Approx. 8 mm
Slot Height: Approx. 24 mm
The slot has a simple oval appearance rather than an illustrated Euro profile cylinder outline.
The compatible lock and key configuration must be established before purchasing the escutcheon.
The supplied reference image does not establish the actual spindle dimension.
Many lever-operated architectural lock systems use square spindles, but the LH1105 spindle size and length must be verified.
Customers should confirm spindle compatibility with the selected latch or mortise lock.
The preliminary drawing does not specify a verified door thickness range.
Door compatibility depends on the fixing system, spindle length, selected lock mechanism, and door construction.
| Component | Reference Dimension |
|---|---|
| Lever Length | Approx. 135 mm |
| Handle Projection | Approx. 60 mm |
| Lever Face Height | Approx. 24 mm |
| Lever Thickness | To Be Confirmed |
| Square Rose Width | Approx. 52 mm |
| Square Rose Height | Approx. 52 mm |
| Rose Thickness | Approx. 10 mm |
| Square Escutcheon | Approx. 52 × 52 mm |
| Oval Slot Width | Approx. 8 mm |
| Oval Slot Height | Approx. 24 mm |
| Spindle Size | To Be Confirmed |
| Fixing Hole Spacing | To Be Confirmed |
| Door Thickness | To Be Confirmed |
Engineering Reference Notice: The supplied drawing is intended for preliminary product identification and comparison only. It must not be used directly for production machining, tooling, door drilling, or final installation.
The supplied LH1105 reference drawing does not confirm the product's base material.
Similar architectural lever handles are commercially manufactured from materials such as stainless steel, zinc alloy, and other engineered metal components.
However, these materials should be treated as market examples rather than confirmed LH1105 specifications.
Buyers requiring a particular material or grade should contact DEGOL for confirmation.
The LH1105 reference image features a satin silver decorative appearance with subtle linear brushing across the flat rectangular lever.
This surface appearance coordinates with contemporary interior doors and modern metallic architectural hardware.
Its understated silver tone creates a clean aesthetic without the strong reflections of highly polished decorative finishes.
The illustrated lever face shows a fine directional brushing effect.
This visual texture contributes to the product's minimalist industrial appearance.
The actual surface process, coating, and finish designation must be confirmed with production samples.
Depending on manufacturing feasibility, customers may inquire about finishes such as:
Satin Silver
Brushed Stainless Steel Look
Polished Silver
Matte Black
Brushed Nickel Appearance
Custom Project Finishes
These finishes are potential customization inquiries, not verified standard LH1105 options.
Finish selection depends on the confirmed substrate material, surface treatment process, minimum order quantity, and production requirements.
For the final confirmed surface finish, use appropriate non-abrasive cleaning methods.
A soft cloth and a suitable mild cleaner are generally preferred for decorative architectural metal hardware.
Avoid aggressive abrasive materials and cleaning chemicals that may damage the surface.
Specific cleaning instructions should be matched to the confirmed material and coating.
The DEGOL LH1105 Modern Flat Rectangular Door Lever Handle Set is designed for consideration in contemporary architectural interiors.
Its straight geometric lever profile and matching square rose make it suitable for modern door design schemes.
The LH1105 provides a minimalist visual option for bedroom doors, study rooms, residential corridors, and other compatible interior swing doors.
The geometric design is suitable for consideration in apartment and condominium developments using contemporary door finishes and coordinated architectural fittings.
The flat rectangular lever design complements modern hospitality interiors.
Use in hotel guestroom or service-door applications must be assessed against the project's lock, security, durability, and building requirements.
The simple horizontal profile coordinates with modern workplace interiors, private offices, meeting rooms, and administrative spaces.
LH1105 can be considered for compatible interior door applications within retail, business, and other commercial developments.
Performance and code requirements must be reviewed before specifying the hardware.
The flat-bar lever style offers a distinct design category for wholesalers and distributors supplying modern door hardware.
Door manufacturers can evaluate the LH1105 design for integration with compatible door leaves, locks, and installation systems.
The square rose and straight lever appearance may complement renovation projects adopting geometric and minimalist interior design themes.
The LH1105 is intended for evaluation as a lever-operated fitting for compatible hinged doors.
| Door Type | Application Consideration |
|---|---|
| Wooden Interior Door | Suitable if lock and fixing requirements are met |
| MDF Interior Door | Subject to secure mounting and door construction |
| Composite Interior Door | Subject to installation compatibility |
| Apartment Interior Door | Suitable for evaluation |
| Residential Bedroom Door | Compatible latch required |
| Office Interior Door | Suitable for evaluation |
| Hotel Guestroom Door | Subject to project-specific lock and performance requirements |
| Commercial Interior Door | Subject to duty and code requirements |
| Metal Door | Requires suitable door preparation and fixing system |
| Exterior Entrance Door | Environmental suitability must be verified |
| Fire-Rated Door | Requires relevant certification and assembly compatibility |
| Frameless Glass Door | Direct mounting compatibility not established |
| Sliding Door | Not intended as a standard sliding-door pull handle |
Before selecting LH1105, confirm:
Door thickness
Door material and construction
Required spindle size and length
Latch or mortise lock compatibility
Rose mounting arrangement
Fixing-hole centres
Keyhole and lock compatibility
Required handing or reversibility
Applicable building and safety requirements
The handle should not be described as fire-rated, certified for emergency exits, or suitable for a particular security application unless relevant documentation is available.
The following installation procedure is a general reference for lever-on-square-rose hardware.
The final procedure must follow the confirmed LH1105 fixing structure and the selected latch or lock manufacturer's instructions.
Inspect the lever handles, mounting roses, escutcheons, spindle, fixing screws, and other accessories included in the confirmed packaging.
Ensure all components match the purchased configuration.
Check door thickness, door construction, mounting-hole requirements, and selected lock specifications.
Confirm that the operating spindle is compatible with the latch or mortise lock follower.
Mark and prepare the required openings according to approved technical drawings.
Do not use the preliminary market reference drawing as a drilling template.
Install the compatible latch or mortise lock following its manufacturer's instructions.
Check that the operating mechanism functions before installing the handles.
Insert the approved spindle through the lock follower.
Ensure the spindle length and engagement are suitable for the chosen door thickness and handle configuration.
Align the LH1105 lever handle assemblies with the spindle and prepared mounting points.
Ensure that the flat lever profiles are correctly oriented.
Fix the mounting assemblies using the approved fixing system.
Install any decorative square rose covers included in the product configuration.
Avoid overtightening screws or damaging the door surface.
Position the square escutcheons over the correctly prepared key or lock openings.
Confirm that the vertical oval slots are compatible with the selected locking arrangement.
Secure the components according to the approved fixing instructions.
Operate the lever several times and confirm:
Smooth handle movement
Correct latch retraction
Secure mounting
Proper lever alignment
Suitable door clearance
Correct operation of the selected lock
Proper return action where a return mechanism is specified
Spindle size, screw dimensions, lock geometry, and mounting requirements must be established before installation.
A qualified installer should be used where required by the project or applicable regulations.
The LH1105 features a straight flat-bar lever that creates a distinctive geometric appearance compared with traditional tubular or curved door handles.
The clean horizontal profile and square mounting rose complement modern, minimalist, and contemporary interior design schemes.
The illustrated rectangular lever features a wide, flat front face that provides a different gripping form from narrow cylindrical handles.
The compact square mounting rose creates visual consistency with modern square architectural fittings.
The matching square escutcheon maintains consistent geometric styling across the handle and keyhole areas.
The illustrated satin silver look provides a neutral metallic appearance that coordinates with multiple modern door finishes.
The design can be considered for residential, apartment, office, hotel, and commercial interior projects.
The rectangular lever profile offers a clear visual distinction for architectural door hardware catalogues and product collections.
Customers can discuss custom finishes, private-label packaging, material requirements, and other product modifications with DEGOL.
International buyers can contact Jiangmen Degol Hardware Co., Ltd. for technical discussions, samples, wholesale quotations, and customized sourcing requirements.
Jiangmen Degol Hardware Co., Ltd. welcomes OEM and ODM inquiries for modern architectural door hardware, including flat rectangular lever handle designs such as LH1105.
International importers, distributors, hardware brands, and project buyers may submit their specifications for technical and commercial evaluation.
Potential OEM branding requirements include:
Customer brand labels
Customized product identification
Private-label product packaging
Barcode labels
Branded instruction sheets
Customized export carton markings
Brand application methods and availability depend on production feasibility.
Customers may request evaluation of specific base materials or material grades.
Material selection must consider product strength, required finish, manufacturing method, cost, and intended application.
No specific material grade should be assumed without written confirmation.
DEGOL can be contacted regarding alternative decorative surface finishes for different regional market preferences.
Customers may provide finish samples, color references, or project specifications for review.
Potential customization requests include:
Lever length
Rectangular grip width
Lever thickness
Handle projection
Lever end profile
Connecting neck dimensions
Square rose dimensions
Dimensional changes may require engineering review, revised technical drawings, and additional tooling.
Customers may discuss matching escutcheon configurations for different compatible key and locking arrangements.
The shape and dimensions of the escutcheon opening must match the approved lock system.
Private-label packaging requirements may include individual product boxes, printed inserts, protective packaging, barcode stickers, and customized master cartons.
Buyers may submit door schedules, sample requirements, reference drawings, finish requirements, and estimated order quantities for evaluation.
Where available, pre-production samples can be requested to confirm product appearance, dimensions, material, finish, and installation compatibility.
OEM / ODM Notice: All customization requests are subject to feasibility, tooling requirements, available manufacturing processes, material selection, MOQ, sample approval, and production lead-time confirmation.
| Item | Information |
|---|---|
| Brand | DEGOL |
| Product Model | LH1105 |
| Product Name | Flat Rectangular Door Lever Handle Set |
| Product Style | Modern / Minimalist |
| Reference Finish | Satin Silver Appearance |
| Main Material | To Be Confirmed |
| Handle Quantity per Set | To Be Confirmed |
| Square Roses | Illustrated; final quantity to be confirmed |
| Square Escutcheons | Illustrated; inclusion to be confirmed |
| Square Spindle | Size and inclusion to be confirmed |
| Fixing Screws | Subject to Confirmed Packing List |
| Lock Case | Not Confirmed as Included |
| Key / Cylinder Components | Not Confirmed as Included |
| MOQ | Subject to Quotation |
| Sample Availability | On Request |
| OEM Packaging | Subject to Confirmation |
| Production Lead Time | Subject to Order Confirmation |
| Payment Terms | To Be Negotiated |
| Shipping Terms | Subject to Quotation |
| Manufacturer | Jiangmen Degol Hardware Co., Ltd. |
| Country of Origin | China |
Step 1 – Submit an Inquiry
Contact DEGOL with the LH1105 model number, estimated order quantity, destination country, and any particular product requirements.
Step 2 – Confirm Product Specifications
Verify the base material, available finish, lever dimensions, rose size, spindle, fixing system, and lock compatibility.
Step 3 – Request a Sample
Discuss sample availability, sample charges, and delivery arrangements.
Step 4 – Confirm Customization Requirements
Provide OEM branding, packaging artwork, technical drawings, or other requirements if applicable.
Step 5 – Review Wholesale Pricing
Confirm unit prices, MOQ, packaging, payment terms, production lead time, and shipping conditions.
Step 6 – Approve the Final Product Configuration
Review the approved specifications, sample, and packing list before production.
Step 7 – Arrange Production and Shipment
Production and shipping proceed according to the confirmed purchase order and agreed commercial terms.
To receive a more accurate quotation, please provide:
Product Model: LH1105
Required Order Quantity
Preferred Material
Required Surface Finish
Destination Country
Lock and Spindle Requirements
Packaging Requirements
OEM / ODM Requirements
Target Delivery Schedule
Jiangmen Degol Hardware Co., Ltd. is a China-based hardware manufacturer and export supplier providing architectural and related hardware solutions to international customers.
DEGOL's product categories include door hardware, glass hardware, furniture hardware, window hardware, and associated fittings.
The company's published manufacturing information describes capabilities covering material preparation, machining, polishing, assembly, quality inspection, and final packaging.
DEGOL supplies and develops hardware products across categories such as:
Modern door lever handles
Flat rectangular lever handles
Stainless steel door hardware
Lever handles on square roses
Lever handles on round roses
Square and round escutcheons
Door lock and latch hardware
Door hinges
Door hardware accessories
Customized architectural hardware
DEGOL describes factory operations involving multiple stages of hardware production and finishing.
Customers may contact the company to discuss product manufacturing feasibility and technical requirements for the LH1105 design.
OEM and ODM customers can submit reference products, drawings, dimensional specifications, or design requirements for evaluation.
Finish options can be discussed according to the selected base material, appearance requirements, processing method, and order volume.
The company's published factory information includes assembly and quality inspection among its manufacturing activities.
Product-specific inspection standards, testing procedures, and compliance documents should be confirmed for each order.
DEGOL provides packaging and export-related services for international hardware supply.
Final packaging arrangements depend on the product configuration and customer requirements.
DEGOL welcomes inquiries from:
Architectural hardware importers
Door handle wholesalers
Regional hardware distributors
Building material suppliers
Door manufacturers
Hardware brands
Hotel project buyers
Construction contractors
OEM / ODM customers
Customers may request product information such as:
Confirmed material specifications
Product technical drawings
Dimensional information
Available surface finishes
Spindle and lock compatibility
Sample availability
Packaging specifications
Wholesale quotations
Factory Information Notice: Factory capabilities described here reflect DEGOL's published company information. Product-specific production arrangements, manufacturing capacity, testing results, and certification status should be confirmed for LH1105 before purchase.
The DEGOL LH1105 is a modern flat rectangular lever handle design featuring a square mounting rose and a matching square escutcheon with a vertical oval opening.
Its straight geometric lever profile is intended to complement modern interior architecture.
LH1105 is classified as a flat rectangular lever handle on a square rose.
It is designed for evaluation with compatible lever-operated door locking or latching systems.
The LH1105 features a long straight rectangular lever with a broad flat face and a minimalist square rose.
Its geometric form distinguishes it from curved and conventional tubular lever handles.
The actual LH1105 material has not been confirmed in the supplied reference drawing.
Customers should request the final base material and grade specification before ordering.
SUS304 has not been verified as the standard LH1105 material.
Customers requiring SUS304 should contact DEGOL to confirm whether this material is available for the requested design.
The reference illustration shows a satin silver metallic appearance.
The final surface finish and processing method should be confirmed with DEGOL.
The preliminary engineering illustration indicates an approximate lever length of 135 mm.
This is a market reference dimension rather than a verified production measurement.
The preliminary reference drawing shows an approximate handle projection of 60 mm.
Final projection must be verified against the actual mounting structure.
The drawing identifies an approximate 24 mm lever face height.
The precise width and thickness of the final rectangular cross-section must be confirmed separately.
The reference square rose measures approximately 52 × 52 mm.
Its illustrated thickness is approximately 10 mm.
Yes, the reference illustration includes a matching square escutcheon with a vertical oval opening.
The final commercial package contents must be confirmed before ordering.
The illustrated vertical oval slot measures approximately 8 × 24 mm.
The actual locking-system compatibility should be checked before purchase.
The illustration does not establish a Euro profile cylinder opening.
The visible escutcheon has a narrow vertical oval slot, and the intended lock configuration must be confirmed independently.
The spindle size is not specified in the preliminary drawing.
Customers should request the confirmed spindle dimension and compatible lock requirements.
The verified door thickness range has not been provided.
Actual compatibility depends on the spindle, mounting accessories, lock mechanism, and door construction.
LH1105 may be used on compatible wooden interior doors when the installation requirements, fixing arrangement, and lock specifications are suitable.
The modern flat-bar design is suitable for consideration in hotel, office, and commercial interior projects.
Final suitability depends on the required lock specifications, usage conditions, and applicable performance requirements.
Exterior suitability has not been established.
Buyers should verify material grade, environmental resistance, finish performance, and required technical documentation before selecting the product for exterior use.
No LH1105 fire-rating certification has been provided.
Use on a fire-rated door requires confirmation that the complete door assembly and associated hardware meet the applicable requirements.
The preliminary illustration does not establish whether the handle includes an internal spring mechanism.
This feature should be confirmed before purchasing the product.
The handle's handing and reversibility have not been confirmed.
Customers should specify the required installation orientation when requesting product details.
Customers may inquire about alternative finishes according to their project requirements.
Finish availability is subject to material compatibility, manufacturing feasibility, and order conditions.
Yes. DEGOL welcomes OEM and ODM inquiries for architectural hardware products, including custom branding, packaging, material requirements, finishes, and product modifications.
Customers may request private-label branding and packaging solutions.
Specific branding methods and order requirements must be confirmed.
Customers can contact DEGOL to inquire about sample availability, sample pricing, and delivery arrangements.
The LH1105 minimum order quantity has not been verified.
MOQ may depend on the selected material, finish, product configuration, and customized packaging requirements.
The preliminary drawing does not confirm that a latch, lock case, key, or cylinder is supplied.
Customers should review the confirmed packing list before placing an order.
Buyers may contact DEGOL to request the available technical drawings and confirmed product specifications.
The preliminary reference image should not be used as an approved manufacturing drawing.
DEGOL welcomes wholesale inquiries from hardware importers, distributors, door manufacturers, project contractors, and other professional buyers.
Contact DEGOL Hardware through WhatsApp at +86 13725946499 or email info@degolhardware.com.
Please provide model LH1105, required quantity, material and finish requirements, packaging preferences, and destination country to request a quotation.
Looking for a modern flat rectangular lever handle with square rose and matching oval keyhole escutcheons for your architectural door hardware range?
Contact DEGOL Hardware for product specifications, technical drawings, available finishes, sample information and wholesale pricing.
Product Model: LH1105
Product Name: LH1105 Modern Flat Rectangular Door Lever Handle Set on Square Rose with Matching Oval Keyhole Escutcheons
Company: Jiangmen Degol Hardware Co., Ltd.
WhatsApp: +86 13725946499
Website: https://www.degolhardware.com/
Email: info@degolhardware.com
Request Your LH1105 Flat Rectangular Door Lever Handle Set Wholesale Quote Today
